Pawel Dembicki 20b09a2125 ramips: add support for Lava LR-25G001 ... The Lava LR-25G001 Wireless Router is based on the MT7620A SoC. Specification: - MediaTek MT7620A (580 Mhz) - 64 MB of RAM - 16 MB of FLASH - 1x 802.11bgn radio - 1x 802.11ac radio (MT7610EN) - 5x 10/100/1000 Mbps AR8337 Switch (1 WAN AND 4 LAN) - 2x external, detachable antennas - 1x USB 2.0 - UART (J3) header on PCB (57600 8n1) - 8x LED (3x GPIO-controlled), 2x button - JBOOT bootloader Known issues: - Work only three Gigabit ports (3/5, 1 WAN and 2LAN) Installation: Apply factory image via http web-gui or JBOOT recovery page How to revert to OEM firmware: - push the reset button and turn on the power. Wait until LED start blinking (~10sec.) - upload original factory image via JBOOT http (IP: 192.168.123.254) Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>		2018-11-26 12:16:52 +01:00
..
3G-6200N.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
3G-6200NL.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
3G150B.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
3G300M.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
11ACNAS.dts	ramips: set usb led trigger via devicetree	2018-10-07 11:34:18 +02:00
A5-V11.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
AC1200RM.dts	ramips: move status led unset to devicetree	2018-10-07 11:34:18 +02:00
AI-BR100.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
AIR3GII.dts	ramips: set usb led trigger via devicetree	2018-10-07 11:34:18 +02:00
ALL0239-3G.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
ALL0256N-4M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
ALL0256N-8M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
ALL0256N.dtsi	ramips: fix dtc warnings	2018-08-04 08:39:35 +02:00
ALL5002.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
ALL5003.dts	ramips: drop not existing groups from pinmux	2018-08-23 22:40:59 +02:00
AP-MT7621A-V60.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
AR670W.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
AR725W.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
ASL26555-8M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
ASL26555-16M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
ASL26555.dtsi	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
ATP-52B.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
AWAPN2403.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
AWM002-EVB-4M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
AWM002-EVB-8M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
AWM002-EVB.dtsi	ramips: fix dtc warnings	2018-08-04 08:39:35 +02:00
AWUSFREE1.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
ArcherC2-v1.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
ArcherC20i.dts	ramips: add missing DTS frequency limit for the 5 GHz radio on Archer C20i	2018-11-06 22:25:49 +01:00
ArcherC20v1.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
ArcherC20v4.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
ArcherC50.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
ArcherC50V3.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
ArcherMR200.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
BC2.dts	ramips: set usb led trigger via devicetree	2018-10-07 11:34:18 +02:00
BDCOM-WAP2100-SK.dts	ramips: Add support for ZTE ZXECS EBG3130 aka BDCOM WAP2100-SK	2018-11-26 12:05:44 +01:00
BOCCO.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
BR-6475ND.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
BR-6478AC-V2.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
BROADWAY.dts	ramips: set usb led trigger via devicetree	2018-10-07 11:34:18 +02:00
C108.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
CARAMBOLA.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
CF-WR800N.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
CS-QR10.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
CY-SWR1100.dts	ramips: move status led unset to devicetree	2018-10-07 11:34:18 +02:00
D105.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
D240.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
DAP-1350.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
DAP-1522-A1.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
DB-WRT01.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
DCH-M225.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
DCS-930.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
DCS-930L-B1.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
DIR-300-B1.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
DIR-300-B7.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
DIR-320-B1.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
DIR-600-B1.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
DIR-610-A1.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
DIR-615-D.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
DIR-615-H1.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
DIR-620-A1.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
DIR-620-D1.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
DIR-645.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
DIR-810L.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
DIR-860L-B1.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
DUZUN-DM06.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
DWR-116-A1.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
DWR-118-A2.dts	ramips: move status led unset to devicetree	2018-10-07 11:34:18 +02:00
DWR-512-B.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
DWR-921-C1.dts	ramips: move status led unset to devicetree	2018-10-07 11:34:18 +02:00
E1700.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
ESR-9753.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
EW1200.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
EX2700.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
EX3700.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
F5D8235_V1.dts	ramips: move status led unset to devicetree	2018-10-07 11:34:18 +02:00
F5D8235_V2.dts	ramips: fix ethernet for f5d8235-v2 board	2018-11-26 09:58:17 +01:00
F7C027.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
FIREWRT.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
FONERA20N.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
FREESTATION5.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
GB-PC1.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
GB-PC2.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
GL-MT300A.dts	treewide: fix some cosmetic glitches in dts files	2018-08-27 19:31:17 +02:00
GL-MT300N-V2.dts	ramips: fix leds on GL.iNet GL-MT300N-V2	2018-11-02 21:43:15 +01:00
GL-MT300N.dts	treewide: fix some cosmetic glitches in dts files	2018-08-27 19:31:17 +02:00
GL-MT750.dts	treewide: fix some cosmetic glitches in dts files	2018-08-27 19:31:17 +02:00
HC5X61.dtsi	ramips: fix mt7620a ND/SD pins pinmuxes	2018-09-06 21:35:53 +02:00
HC5661.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
HC5661A.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
HC5761.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
HC5861.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
HC5861B.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
HC5962.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
HG255D.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
HLKRM04.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
HPM.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
HT-TM02.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
HW550-3G.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
IP2202.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
JHR-N805R.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
JHR-N825R.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
JHR-N926R.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
K2G.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
K2P.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
LINKIT7688.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
LR-25G001.dts	ramips: add support for Lava LR-25G001	2018-11-26 12:16:52 +01:00
M2M.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
M3.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
M4-4M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
M4-8M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
M4.dtsi	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
MAC1200RV2.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
MINIEMBPLUG.dts	ramips: set usb led trigger via devicetree	2018-10-07 11:34:18 +02:00
MINIEMBWIFI.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
MIR3G.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
MIWIFI-MINI.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
MIWIFI-NANO.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
MLW221.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
MLWG2.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
MOFI3500-3GN.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
MPRA1.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
MPRA2.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
MR-102N.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
MT7620a.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
MT7620a_MT7530.dts	ramips: remove superfluous & confusing DT binding	2018-08-06 07:05:37 +02:00
MT7620a_MT7610e.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
MT7620a_V22SG.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
MT7621.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
MT7628.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
MZK-750DHP.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
MZK-DP150N.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
MZK-EX300NP.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
MZK-EX750NP.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
MZK-W300NH2.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
MZK-WDPR.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
MicroWRT.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
NA930.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
NBG-419N.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
NBG-419N2.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
NCS601W.dts	ramips: drop not existing groups from pinmux	2018-08-23 22:40:59 +02:00
NIXCORE-8M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
NIXCORE-16M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
NIXCORE.dtsi	ramips: fix whitespace and comment issues in dts	2018-08-04 08:39:35 +02:00
NW718.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
Newifi-D1.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
Newifi-D2.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
OMEGA2.dts	ramips: fix Omega2 compatible string	2017-12-29 22:32:34 +01:00
OMEGA2.dtsi	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
OMEGA2P.dts	ramips: fix Omega2 compatible string	2017-12-29 22:32:34 +01:00
OY-0001.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
PBR-D1.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
PBR-M1.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
PSG1208.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
PSG1218.dtsi	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
PSG1218A.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
PSG1218B.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
PSR-680W.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
PWH2004.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
PX-4885-4M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
PX-4885-8M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
PX-4885.dtsi	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
R6120.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
R6220.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
RB750Gr3.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
RBM11G.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
RBM33G.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
RE350.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
RE6500.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
RP-N53.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
RT-AC51U.dts	ramips: add mt76x0 node to RT-AC51U device tree	2018-11-26 12:05:47 +01:00
RT-G32-B1.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
RT-N10-PLUS.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
RT-N12-PLUS.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
RT-N13U.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
RT-N14U.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
RT-N15.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
RT-N56U.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
RT5350F-OLINUXINO-EVB.dts	ramips: introduce RT5350F-OLINUXINO.dtsi	2017-09-28 09:20:36 +02:00
RT5350F-OLINUXINO.dts	ramips: introduce RT5350F-OLINUXINO.dtsi	2017-09-28 09:20:36 +02:00
RT5350F-OLINUXINO.dtsi	ramips: drop not existing groups from pinmux	2018-08-23 22:40:59 +02:00
RUT5XX.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
SAP-G3200U3.dts	ramips: set usb led trigger via devicetree	2018-10-07 11:34:18 +02:00
SK-WB8.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
SKW92A.dts	ramips: add support for Skylab SKW92A in EVB	2018-11-26 09:47:27 +01:00
SL-R7205.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
TEW-638APB-V2.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
TEW-691GR.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
TEW-692GR.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
TEW-714TRU.dts	ramips: set usb led trigger via devicetree	2018-10-07 11:34:18 +02:00
TINY-AC.dts	ramips: set usb led trigger via devicetree	2018-10-07 11:34:18 +02:00
TL-MR3020V3.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
TL-MR3420V5.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
TL-WA801NDV5.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
TL-WR840NV4.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
TL-WR840NV5.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
TL-WR841NV13.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
TL-WR842NV5.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
TL-WR902ACV3.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
TPLINK-8M.dtsi	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
Timecloud.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
U25AWF-H1.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
U35WF.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
U7621-06-256M-16M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
U7621-06.dtsi	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
U7628-01-128M-16M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
U7628-01.dtsi	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
UBNT-ER-e50.dtsi	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
UBNT-ERX-SFP.dts	ramips: add missing soc compatibles to dts	2018-01-09 22:05:46 +01:00
UBNT-ERX.dts	ramips: add support for Ubiquiti EdgeRouter X-SFP	2017-06-07 06:33:33 +02:00
UR-326N4G.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
UR-336UN.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
V11STFE.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
V22RW-2X2.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
VAR11N-300.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
VOCORE-8M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
VOCORE-16M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
VOCORE.dtsi	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
VOCORE2.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
VOCORE2.dtsi	ramips: backport MT7628 pinmux fixes	2017-11-22 08:21:52 +01:00
VOCORE2LITE.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
VR500.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
W06.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
W150M.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
W306R_V20.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
W502U.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
W2914NSV2.dts	ramips: set usb led trigger via devicetree	2018-10-07 11:34:18 +02:00
W2914NSV2.dtsi	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
WCR-1166DS.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WCR150GN.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WD03.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
WE1026-5G-16M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
WE1026-5G.dtsi	ramips: set usb led trigger via devicetree	2018-10-07 11:34:18 +02:00
WF-2881.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WHR-300HP2.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WHR-600D.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WHR-1166D.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WHR-G300N.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WIDORA-NEO-16M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
WIDORA-NEO-32M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
WIDORA-NEO.dtsi	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WITI-256M.dts	ramips: add support for mqmaker witi 512mb version	2018-05-07 18:54:23 +02:00
WITI-512M.dts	ramips: add support for mqmaker witi 512mb version	2018-05-07 18:54:23 +02:00
WITI.dtsi	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
WIZARD8800.dts	ramips: drop not existing groups from pinmux	2018-08-23 22:40:59 +02:00
WIZFI630A.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WL-330N.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WL-330N3G.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WL-341V3.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
WL-351.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WL-WN575A3.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
WLI-TX4-AG300N.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WLR-6000.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WMDR-143N.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
WMR-300.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WN-AX1167GR.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WN-GX300GR.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WN3000RPV3.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WNCE2001.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WNDR3700V5.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WR512-3GN-4M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
WR512-3GN-8M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
WR512-3GN.dtsi	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WR1200JS.dts	ramips: move status led unset to devicetree	2018-10-07 11:34:18 +02:00
WR6202.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
WRC-1167GHBK2-S.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WRC-1900GST.dts	ramips: add support for ELECOM WRC-1900GST	2018-08-23 22:42:09 +02:00
WRC-2533GST.dts	ramips: add support for ELECOM WRC-1900GST	2018-08-23 22:42:09 +02:00
WRH-300CR.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WRTNODE.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WRTNODE2.dtsi	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
WRTNODE2P.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WRTNODE2R.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WSR-600.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WSR-1166.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WT1520-4M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
WT1520-8M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
WT1520.dtsi	ramips: fix dtc warnings	2018-08-04 08:39:35 +02:00
WT3020-4M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
WT3020-8M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
WT3020.dtsi	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
WZR-AGL300NH.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
X5.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
X8.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
XDXRN502J.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
Y1.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
Y1.dtsi	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
Y1S.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
YOUKU-YK1.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
ZBT-APE522II.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
ZBT-CPE102.dts	ramips: move status led unset to devicetree	2018-10-07 11:34:18 +02:00
ZBT-WA05.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
ZBT-WE826-16M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
ZBT-WE826-32M.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
ZBT-WE826.dtsi	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
ZBT-WE1226.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
ZBT-WE1326.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
ZBT-WE2026.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
ZBT-WE3526.dts	ramips: move partitions into partition table node	2018-08-04 08:39:35 +02:00
ZBT-WG2626.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
ZBT-WG3526-16M.dts	ramips: mt7621: add compatible strings	2017-07-29 09:24:32 +02:00
ZBT-WG3526-32M.dts	ramips: mt7621: add compatible strings	2017-07-29 09:24:32 +02:00
ZBT-WG3526.dtsi	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
ZBT-WR8305RT.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
ZL5900V2.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
ZTE-Q7.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
elecom_wrc-gst.dtsi	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
ki_rb.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
kn.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
kn_rc.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
kn_rf.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
kng_rc.dts	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
mt7620a.dtsi	ramips: set usb led trigger via devicetree	2018-10-07 11:34:18 +02:00
mt7620n.dtsi	ramips: set usb led trigger via devicetree	2018-10-07 11:34:18 +02:00
mt7621.dtsi	ramips: fix some clocks in mt7621.dtsi	2018-11-26 12:13:52 +01:00
mt7628an.dtsi	ramips: set usb led trigger via devicetree	2018-10-07 11:34:18 +02:00
rt2880.dtsi	ramips: use ralink,nr-gpio instead of ralink,num-gpios	2018-08-04 08:39:35 +02:00
rt3050.dtsi	ramips: set usb led trigger via devicetree	2018-10-07 11:34:18 +02:00
rt3352.dtsi	ramips: set usb led trigger via devicetree	2018-10-07 11:34:18 +02:00
rt3883.dtsi	ramips: set usb led trigger via devicetree	2018-10-07 11:34:18 +02:00
rt5350.dtsi	ramips: set usb led trigger via devicetree	2018-10-07 11:34:18 +02:00