1
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-06-17 20:53:59 +02:00
openwrt/target/linux/ramips/dts/R6220.dts
Mathias Kresin 8f4dfadd5a ramips: add support for indicating the boot state using multiple leds
Use diag.sh version used for other targets supporting different leds
for the different boot states.

The existing led sequences should be the same as before.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-10-07 11:34:18 +02:00

170 lines
2.7 KiB
Plaintext

/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "netgear,r6220", "mediatek,mt7621-soc";
model = "Netgear R6220";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x8000000>;
};
chosen {
bootargs = "console=ttyS0,57600";
};
gpio-leds {
compatible = "gpio-leds";
led_power: power {
label = "r6220:green:power";
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
};
usb {
label = "r6220:green:usb";
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
linux,default-trigger = "usbport";
};
internet {
label = "r6220:green:wan";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
wifi {
label = "r6220:green:wifi";
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
};
wps {
label = "r6220:green:wps";
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
wps {
label = "wps";
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WPS_BUTTON>;
};
wifi {
label = "wifi";
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_RESTART>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
usbpower {
gpio-export,name = "usbpower";
gpio-export,output = <1>;
gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
};
};
};
&nand {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x100000>;
read-only;
};
partition@100000 {
label = "SC PID";
reg = <0x100000 0x100000>;
read-only;
};
partition@200000 {
label = "kernel";
reg = <0x200000 0x400000>;
};
partition@600000 {
label = "ubi";
reg = <0x600000 0x1c00000>;
};
factory: partition@2e00000 {
label = "factory";
reg = <0x2e00000 0x100000>;
read-only;
};
partition@4200000 {
label = "reserved";
reg = <0x4200000 0x3c00000>;
read-only;
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&pcie1 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0000>;
ieee80211-freq-limit = <2400000 2500000>;
};
};
&ethernet {
mtd-mac-address = <&factory 0x00000004>;
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "uart3", "jtag";
ralink,function = "gpio";
};
};
};