1
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-06-18 13:13:55 +02:00
openwrt/target/linux/ramips/dts/ArcherC2-v1.dts
Mathias Kresin 8f4dfadd5a ramips: add support for indicating the boot state using multiple leds
Use diag.sh version used for other targets supporting different leds
for the different boot states.

The existing led sequences should be the same as before.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-10-07 11:34:18 +02:00

191 lines
2.9 KiB
Plaintext

/dts-v1/;
#include "mt7620a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "tplink,c2-v1", "ralink,mt7620a-soc";
model = "TP-Link Archer C2 v1";
aliases {
led-boot = &led_wps;
led-failsafe = &led_wps;
led-running = &led_wps;
led-upgrade = &led_wps;
};
chosen {
bootargs = "console=ttyS0,115200";
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uartf", "wled", "ephy", "spi refclk";
ralink,function = "gpio";
};
};
};
gpio-leds {
compatible = "gpio-leds";
lan {
label = "c2-v1:green:lan";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
};
usb {
label = "c2-v1:green:usb";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port1>, <&ehci_port1>;
linux,default-trigger = "usbport";
};
led_wps: wps {
label = "c2-v1:green:wps";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
wan {
label = "c2-v1:green:wan";
gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
};
wlan {
label = "c2-v1:green:wlan";
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
};
};
gpio-keys {
compatible = "gpio-keys";
reset_wps {
label = "reset_wps";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
rfkill {
label = "rfkill";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
};
rtl8367rb {
compatible = "realtek,rtl8367b", "rtl8367b";
cpu_port = <6>;
realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
mii-bus = <&mdio0>;
};
};
&spi0 {
status = "okay";
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x20000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0x7a0000>;
};
partition@7c0000 {
label = "config";
reg = <0x7c0000 0x10000>;
read-only;
};
rom: partition@7d0000 {
label = "rom";
reg = <0x7d0000 0x10000>;
read-only;
};
partition@7e0000 {
label = "romfile";
reg = <0x7e0000 0x10000>;
read-only;
};
radio: partition@7f0000 {
label = "radio";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
};
&ethernet {
status = "okay";
mtd-mac-address = <&rom 0xf100>;
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
port@5 {
status = "okay";
mediatek,fixed-link = <1000 1 1 1>;
phy-mode = "rgmii";
};
mdio0: mdio-bus {
status = "okay";
};
};
&gpio1 {
status = "okay";
};
&gpio2 {
status = "okay";
};
&gpio3 {
status = "okay";
};
&wmac {
ralink,mtd-eeprom = <&radio 0>;
mtd-mac-address = <&rom 0xf100>;
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};
&pcie {
status = "okay";
};
&pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&radio 0x8000>;
};
};