openwrt/target/linux/ramips/dts/K2P.dts

128 lines
1.9 KiB
Plaintext

/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "phicomm,k2p", "mediatek,mt7621-soc";
model = "Phicomm K2P";
aliases {
led-boot = &led_blue;
led-failsafe = &led_blue;
led-running = &led_blue;
led-upgrade = &led_blue;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x8000000>;
};
chosen {
bootargs = "console=ttyS0,57600";
};
gpio-leds {
compatible = "gpio-leds";
stat_r {
label = "k2p:red:status";
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
};
stat_y {
label = "k2p:yellow:status";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
led_blue: stat_b {
label = "k2p:blue:status";
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&spi0 {
status = "okay";
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "permanent_config";
reg = <0x50000 0x50000>;
read-only;
};
partition@a0000 {
label = "firmware";
reg = <0xa0000 0xf60000>;
};
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0>;
};
};
&ethernet {
mtd-mac-address = <&factory 0xe006>;
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "jtag";
ralink,function = "gpio";
};
};
};