1
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-06-17 20:53:59 +02:00
openwrt/target/linux/ramips/dts/WL-341V3.dts
Alex Maclean 6031ab345d ramips: move partitions into partition table node
Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2018-08-04 08:39:35 +02:00

129 lines
2.1 KiB
Plaintext

/dts-v1/;
#include "rt3050.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "sitecom,wl-341-v3", "ralink,rt3052-soc";
model = "Sitecom WL-341 v3";
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
bank-width = <2>;
device-width = <2>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x20000>;
read-only;
};
boardnvram: partition@20000 {
label = "board-nvram";
reg = <0x20000 0x10000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
label = "firmware";
reg = <0x40000 0x3b0000>;
};
};
};
gpio-leds {
compatible = "gpio-leds";
first {
label = "wl-341v3:amber:first";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
first2 {
label = "wl-341v3:blue:first";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
third {
label = "wl-341v3:amber:third";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
third2 {
label = "wl-341v3:blue:third";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
fourth {
label = "wl-341v3:blue:fourth";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
fifth {
label = "wl-341v3:amber:fifth";
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
fifth2 {
label = "wl-341v3:blue:fifth";
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
ralink,function = "gpio";
};
};
};
&ethernet {
mtd-mac-address = <&boardnvram 0xffa0>;
};
&esw {
mediatek,portmap = <0x3e>;
};
&wmac {
ralink,mtd-eeprom = <&boardnvram 0xfd70>;
};
&otg {
status = "okay";
};