ipq40xx: add support for GL.iNet GL-B2200
This patch adds supports for the GL-B2200 router. Specifications: - SOC: Qualcomm IPQ4019 ARM Quad-Core - RAM: 512 MiB - Flash: 16 MiB NOR - SPI0 - EMMC: 8GB EMMC - ETH: Qualcomm QCA8075 - WLAN1: Qualcomm Atheros QCA4019 2.4GHz 802.11b/g/n 2x2 - WLAN2: Qualcomm Atheros QCA4019 5GHz 802.11n/ac W2 2x2 - WLAN3: Qualcomm Atheros QCA9886 5GHz 802.11n/ac W2 2x2 - INPUT: Reset, WPS - LED: Power, Internet - UART1: On board pin header near to LED (3.3V, TX, RX, GND), 3.3V without pin - 115200 8N1 - UART2: On board with BLE module - SPI1: On board socket for Zigbee module Update firmware instructions: Please update the firmware via U-Boot web UI (by default at 192.168.1.1, following instructions found at https://docs.gl-inet.com/en/3/troubleshooting/debrick/). Normal sysupgrade, either via CLI or LuCI, is not possible from stock firmware. Please do use the *gl-b2200-squashfs-emmc.img file, gunzipping the produced *gl-b2200-squashfs-emmc.img.gz one first. What's working: - WiFi 2G, 5G - WPA2/WPA3 Not tested: - Bluetooth LE/Zigbee Credits goes to the original authors of this patch. V1->V2: - updates *arm-boot-add-dts-files.patch correctly (sorry, my mistake) - add uboot-envtools support V2->V3: - Li Zhang updated official patch to fix wrong MAC address on wlan0 (PCI) interface V3->V4: - wire up sysupgrade Signed-off-by: Li Zhang <li.zhang@gl-inet.com> [fix tab and trailing space, document what's working and what's not] Signed-off-by: TruongSinh Tran-Nguyen <i@truongsinh.pro> [rebase on top of master, address remaining comments] Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> [remove redundant check in platform.sh] Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This commit is contained in:
parent
57c1f3f9c5
commit
febc2b831f
|
@ -35,6 +35,7 @@ devolo,magic-2-wifi-next|\
|
||||||
edgecore,ecw5211|\
|
edgecore,ecw5211|\
|
||||||
glinet,gl-ap1300|\
|
glinet,gl-ap1300|\
|
||||||
glinet,gl-b1300|\
|
glinet,gl-b1300|\
|
||||||
|
glinet,gl-b2200|\
|
||||||
luma,wrtq-329acn|\
|
luma,wrtq-329acn|\
|
||||||
netgear,wac510|\
|
netgear,wac510|\
|
||||||
openmesh,a42|\
|
openmesh,a42|\
|
||||||
|
|
|
@ -39,6 +39,7 @@ ALLWIFIBOARDS:= \
|
||||||
engenius_emr3500 \
|
engenius_emr3500 \
|
||||||
ezviz_cs-w3-wd1200g-eup \
|
ezviz_cs-w3-wd1200g-eup \
|
||||||
glinet_gl-ap1300 \
|
glinet_gl-ap1300 \
|
||||||
|
glinet_gl-b2200 \
|
||||||
glinet_gl-s1300 \
|
glinet_gl-s1300 \
|
||||||
linksys_ea8300 \
|
linksys_ea8300 \
|
||||||
linksys_mr8300-v0 \
|
linksys_mr8300-v0 \
|
||||||
|
@ -127,6 +128,7 @@ $(eval $(call generate-ipq-wifi-package,engenius_emd1,EnGenius EMD1))
|
||||||
$(eval $(call generate-ipq-wifi-package,engenius_emr3500,EnGenius EMR3500))
|
$(eval $(call generate-ipq-wifi-package,engenius_emr3500,EnGenius EMR3500))
|
||||||
$(eval $(call generate-ipq-wifi-package,ezviz_cs-w3-wd1200g-eup,EZVIZ CS-W3-WD1200G EUP))
|
$(eval $(call generate-ipq-wifi-package,ezviz_cs-w3-wd1200g-eup,EZVIZ CS-W3-WD1200G EUP))
|
||||||
$(eval $(call generate-ipq-wifi-package,glinet_gl-ap1300,GL.iNet GL-AP1300))
|
$(eval $(call generate-ipq-wifi-package,glinet_gl-ap1300,GL.iNet GL-AP1300))
|
||||||
|
$(eval $(call generate-ipq-wifi-package,glinet_gl-b2200,GL.iNet GL-B2200))
|
||||||
$(eval $(call generate-ipq-wifi-package,glinet_gl-s1300,GL.iNet GL-S1300))
|
$(eval $(call generate-ipq-wifi-package,glinet_gl-s1300,GL.iNet GL-S1300))
|
||||||
$(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300))
|
$(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300))
|
||||||
$(eval $(call generate-ipq-wifi-package,linksys_mr8300-v0,Linksys MR8300))
|
$(eval $(call generate-ipq-wifi-package,linksys_mr8300-v0,Linksys MR8300))
|
||||||
|
|
Binary file not shown.
Binary file not shown.
|
@ -106,6 +106,11 @@ ipq40xx_setup_interfaces()
|
||||||
ucidef_add_switch "switch0" \
|
ucidef_add_switch "switch0" \
|
||||||
"0u@eth0" "3:lan" "4:lan"
|
"0u@eth0" "3:lan" "4:lan"
|
||||||
;;
|
;;
|
||||||
|
glinet,gl-b2200)
|
||||||
|
ucidef_set_interfaces_lan_wan "eth0" "eth1"
|
||||||
|
ucidef_add_switch "switch0" \
|
||||||
|
"0u@eth0" "1:lan" "2:lan" "3:lan" "5:lan" "0u@eth1" "4:wan"
|
||||||
|
;;
|
||||||
mobipromo,cm520-79f)
|
mobipromo,cm520-79f)
|
||||||
ucidef_add_switch "switch0" \
|
ucidef_add_switch "switch0" \
|
||||||
"0u@eth0" "3:lan:2" "4:lan:1"
|
"0u@eth0" "3:lan:2" "4:lan:1"
|
||||||
|
|
|
@ -9,6 +9,9 @@ board=$(board_name)
|
||||||
case "$FIRMWARE" in
|
case "$FIRMWARE" in
|
||||||
"ath10k/cal-pci-0000:01:00.0.bin")
|
"ath10k/cal-pci-0000:01:00.0.bin")
|
||||||
case "$board" in
|
case "$board" in
|
||||||
|
glinet,gl-b2200)
|
||||||
|
caldata_extract "ART" 0x9000 0x2f20
|
||||||
|
;;
|
||||||
meraki,mr33)
|
meraki,mr33)
|
||||||
caldata_extract_ubi "ART" 0x9000 0x844
|
caldata_extract_ubi "ART" 0x9000 0x844
|
||||||
caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
|
caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
|
||||||
|
@ -64,6 +67,7 @@ case "$FIRMWARE" in
|
||||||
ezviz,cs-w3-wd1200g-eup |\
|
ezviz,cs-w3-wd1200g-eup |\
|
||||||
glinet,gl-ap1300 |\
|
glinet,gl-ap1300 |\
|
||||||
glinet,gl-b1300 |\
|
glinet,gl-b1300 |\
|
||||||
|
glinet,gl-b2200 |\
|
||||||
glinet,gl-s1300 |\
|
glinet,gl-s1300 |\
|
||||||
linksys,ea6350v3 |\
|
linksys,ea6350v3 |\
|
||||||
mobipromo,cm520-79f |\
|
mobipromo,cm520-79f |\
|
||||||
|
@ -186,6 +190,7 @@ case "$FIRMWARE" in
|
||||||
ezviz,cs-w3-wd1200g-eup |\
|
ezviz,cs-w3-wd1200g-eup |\
|
||||||
glinet,gl-ap1300 |\
|
glinet,gl-ap1300 |\
|
||||||
glinet,gl-b1300 |\
|
glinet,gl-b1300 |\
|
||||||
|
glinet,gl-b2200 |\
|
||||||
glinet,gl-s1300 |\
|
glinet,gl-s1300 |\
|
||||||
linksys,ea6350v3 |\
|
linksys,ea6350v3 |\
|
||||||
mobipromo,cm520-79f |\
|
mobipromo,cm520-79f |\
|
||||||
|
|
|
@ -96,6 +96,12 @@ platform_do_upgrade() {
|
||||||
qxwlan,e2600ac-c2)
|
qxwlan,e2600ac-c2)
|
||||||
nand_do_upgrade "$1"
|
nand_do_upgrade "$1"
|
||||||
;;
|
;;
|
||||||
|
glinet,gl-b2200)
|
||||||
|
CI_KERNPART="0:HLOS"
|
||||||
|
CI_ROOTPART="rootfs"
|
||||||
|
CI_DATAPART="rootfs_data"
|
||||||
|
emmc_do_upgrade "$1"
|
||||||
|
;;
|
||||||
alfa-network,ap120c-ac)
|
alfa-network,ap120c-ac)
|
||||||
part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')"
|
part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')"
|
||||||
if [ "$part" = "rootfs1" ]; then
|
if [ "$part" = "rootfs1" ]; then
|
||||||
|
@ -166,3 +172,12 @@ platform_do_upgrade() {
|
||||||
;;
|
;;
|
||||||
esac
|
esac
|
||||||
}
|
}
|
||||||
|
|
||||||
|
platform_copy_config() {
|
||||||
|
case "$(board_name)" in
|
||||||
|
glinet,gl-b2200)
|
||||||
|
emmc_copy_config
|
||||||
|
;;
|
||||||
|
esac
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
|
@ -0,0 +1,364 @@
|
||||||
|
// SPDX-License-Identifier: GPL-2.0-only OR MIT
|
||||||
|
|
||||||
|
#include "qcom-ipq4019.dtsi"
|
||||||
|
#include <dt-bindings/gpio/gpio.h>
|
||||||
|
#include <dt-bindings/input/input.h>
|
||||||
|
#include <dt-bindings/soc/qcom,tcsr.h>
|
||||||
|
|
||||||
|
/ {
|
||||||
|
model = "GL.iNet GL-B2200";
|
||||||
|
compatible = "glinet,gl-b2200", "qcom,ipq4019";
|
||||||
|
|
||||||
|
memory {
|
||||||
|
device_type = "memory";
|
||||||
|
reg = <0x80000000 0x10000000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
chosen {
|
||||||
|
bootargs-append = " root=/dev/mmcblk0p2 rw rootwait clk_ignore_unused";
|
||||||
|
};
|
||||||
|
|
||||||
|
soc {
|
||||||
|
rng@22000 {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
mdio@90000 {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
ess-psgmii@98000 {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
tcsr@1949000 {
|
||||||
|
compatible = "qcom,tcsr";
|
||||||
|
reg = <0x1949000 0x100>;
|
||||||
|
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
|
||||||
|
};
|
||||||
|
|
||||||
|
tcsr@194b000 {
|
||||||
|
/* select hostmode */
|
||||||
|
compatible = "qcom,tcsr";
|
||||||
|
reg = <0x194b000 0x100>;
|
||||||
|
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
ess_tcsr@1953000 {
|
||||||
|
compatible = "qcom,tcsr";
|
||||||
|
reg = <0x1953000 0x1000>;
|
||||||
|
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
|
||||||
|
};
|
||||||
|
|
||||||
|
tcsr@1957000 {
|
||||||
|
compatible = "qcom,tcsr";
|
||||||
|
reg = <0x1957000 0x100>;
|
||||||
|
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
|
||||||
|
};
|
||||||
|
|
||||||
|
crypto@8e3a000 {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
ess-switch@c000000 {
|
||||||
|
status = "okay";
|
||||||
|
switch_lan_bmp = <0x2e>;
|
||||||
|
switch_wan_bmp = <0x10>;
|
||||||
|
};
|
||||||
|
|
||||||
|
edma@c080000 {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
keys {
|
||||||
|
compatible = "gpio-keys";
|
||||||
|
|
||||||
|
wps {
|
||||||
|
label = "wps";
|
||||||
|
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
|
||||||
|
linux,code = <KEY_WPS_BUTTON>;
|
||||||
|
linux,input-type = <1>;
|
||||||
|
};
|
||||||
|
|
||||||
|
reset {
|
||||||
|
label = "reset";
|
||||||
|
gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
|
||||||
|
linux,code = <KEY_RESTART>;
|
||||||
|
linux,input-type = <1>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
leds {
|
||||||
|
compatible = "gpio-leds";
|
||||||
|
|
||||||
|
power_blue {
|
||||||
|
label = "blue:power";
|
||||||
|
gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>;
|
||||||
|
default-state = "on";
|
||||||
|
};
|
||||||
|
internet_blue {
|
||||||
|
label = "blue:internet";
|
||||||
|
gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
|
||||||
|
};
|
||||||
|
power_white {
|
||||||
|
label = "white:power";
|
||||||
|
gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
|
||||||
|
};
|
||||||
|
internet_white {
|
||||||
|
label = "white:internet";
|
||||||
|
gpios = <&tlmm 66 GPIO_ACTIVE_LOW>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&gmac1 {
|
||||||
|
qcom,phy_mdio_addr = <3>;
|
||||||
|
qcom,poll_required = <1>;
|
||||||
|
qcom,forced_speed = <1000>;
|
||||||
|
qcom,forced_duplex = <1>;
|
||||||
|
vlan_tag = <2 0x10>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&gmac0 {
|
||||||
|
vlan_tag = <1 0x2e>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&vqmmc {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&sdhci {
|
||||||
|
status = "okay";
|
||||||
|
pinctrl-0 = <&sd_pins>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
cd-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
|
||||||
|
vqmmc-supply = <&vqmmc>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&blsp_dma {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&cryptobam {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&blsp1_spi1 {
|
||||||
|
pinctrl-0 = <&spi_0_pins>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
status = "okay";
|
||||||
|
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
|
||||||
|
|
||||||
|
flash@0 {
|
||||||
|
compatible = "jedec,spi-nor";
|
||||||
|
reg = <0>;
|
||||||
|
spi-max-frequency = <24000000>;
|
||||||
|
|
||||||
|
partitions {
|
||||||
|
compatible = "fixed-partitions";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
|
||||||
|
partition@0 {
|
||||||
|
label = "SBL1";
|
||||||
|
reg = <0x0 0x40000>;
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@40000 {
|
||||||
|
label = "MIBIB";
|
||||||
|
reg = <0x40000 0x20000>;
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@60000 {
|
||||||
|
label = "QSEE";
|
||||||
|
reg = <0x60000 0x60000>;
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@c0000 {
|
||||||
|
label = "CDT";
|
||||||
|
reg = <0xc0000 0x10000>;
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@d0000 {
|
||||||
|
label = "DDRPARAMS";
|
||||||
|
reg = <0xd0000 0x10000>;
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@e0000 {
|
||||||
|
label = "APPSBLENV";
|
||||||
|
reg = <0xe0000 0x10000>;
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@f0000 {
|
||||||
|
label = "APPSBL";
|
||||||
|
reg = <0xf0000 0x80000>;
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@170000 {
|
||||||
|
label = "ART";
|
||||||
|
reg = <0x170000 0x10000>;
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&blsp1_spi2 {
|
||||||
|
pinctrl-0 = <&spi_1_pins>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
spidev1: spi@0 {
|
||||||
|
compatible = "siliconlabs,si3210";
|
||||||
|
reg = <0>;
|
||||||
|
spi-max-frequency = <24000000>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&blsp1_uart1 {
|
||||||
|
pinctrl-0 = <&serial_pins>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&blsp1_uart2 {
|
||||||
|
pinctrl-0 = <&serial_1_pins>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&tlmm {
|
||||||
|
serial_pins: serial_pinmux {
|
||||||
|
mux {
|
||||||
|
pins = "gpio16", "gpio17";
|
||||||
|
function = "blsp_uart0";
|
||||||
|
bias-disable;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
serial_1_pins: serial1_pinmux {
|
||||||
|
mux {
|
||||||
|
pins = "gpio8", "gpio9",
|
||||||
|
"gpio10", "gpio11";
|
||||||
|
function = "blsp_uart1";
|
||||||
|
bias-disable;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
spi_0_pins: spi_0_pinmux {
|
||||||
|
pinmux {
|
||||||
|
function = "blsp_spi0";
|
||||||
|
pins = "gpio13", "gpio14", "gpio15";
|
||||||
|
};
|
||||||
|
pinmux_cs {
|
||||||
|
function = "gpio";
|
||||||
|
pins = "gpio12";
|
||||||
|
};
|
||||||
|
pinconf {
|
||||||
|
pins = "gpio13", "gpio14", "gpio15";
|
||||||
|
drive-strength = <12>;
|
||||||
|
bias-disable;
|
||||||
|
};
|
||||||
|
pinconf_cs {
|
||||||
|
pins = "gpio12";
|
||||||
|
drive-strength = <2>;
|
||||||
|
bias-disable;
|
||||||
|
output-high;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
spi_1_pins: spi_1_pinmux {
|
||||||
|
mux {
|
||||||
|
pins = "gpio44", "gpio46", "gpio47";
|
||||||
|
function = "blsp_spi1";
|
||||||
|
bias-disable;
|
||||||
|
};
|
||||||
|
cs {
|
||||||
|
pins = "gpio45";
|
||||||
|
function = "gpio";
|
||||||
|
bias-pull-up;
|
||||||
|
};
|
||||||
|
reset {
|
||||||
|
pins = "gpio43";
|
||||||
|
function = "gpio";
|
||||||
|
output-high;
|
||||||
|
};
|
||||||
|
mux_2 {
|
||||||
|
pins = "gpio35";
|
||||||
|
function = "gpio";
|
||||||
|
output-high;
|
||||||
|
};
|
||||||
|
host_int {
|
||||||
|
pins = "gpio2";
|
||||||
|
function = "gpio";
|
||||||
|
input;
|
||||||
|
};
|
||||||
|
wake {
|
||||||
|
pins = "gpio48";
|
||||||
|
function = "gpio";
|
||||||
|
output-high;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
sd_pins: sd_pins {
|
||||||
|
pinmux {
|
||||||
|
function = "sdio";
|
||||||
|
pins = "gpio23", "gpio24", "gpio25", "gpio26",
|
||||||
|
"gpio29", "gpio30", "gpio31", "gpio32";
|
||||||
|
drive-strength = <10>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinmux_sd_clk {
|
||||||
|
function = "sdio";
|
||||||
|
pins = "gpio27";
|
||||||
|
drive-strength = <16>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinmux_sd7 {
|
||||||
|
function = "sdio";
|
||||||
|
pins = "gpio28";
|
||||||
|
drive-strength = <10>;
|
||||||
|
bias-disable;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
|
&pcie0 {
|
||||||
|
status = "okay";
|
||||||
|
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
|
||||||
|
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
|
||||||
|
|
||||||
|
bridge@0,0 {
|
||||||
|
reg = <0x00000000 0 0 0 0>;
|
||||||
|
#address-cells = <3>;
|
||||||
|
#size-cells = <2>;
|
||||||
|
ranges;
|
||||||
|
|
||||||
|
wifi2: wifi@1,0 {
|
||||||
|
status = "okay";
|
||||||
|
compatible = "qcom,ath10k";
|
||||||
|
reg = <0x00010000 0 0 0 0>;
|
||||||
|
qcom,ath10k-calibration-variant = "GL-B2200";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&wifi0 {
|
||||||
|
status = "okay";
|
||||||
|
qcom,ath10k-calibration-variant = "GL-B2200";
|
||||||
|
};
|
||||||
|
|
||||||
|
&wifi1 {
|
||||||
|
status = "okay";
|
||||||
|
qcom,ath10k-calibration-variant = "GL-B2200";
|
||||||
|
};
|
|
@ -1 +1,2 @@
|
||||||
BOARDNAME:=Generic
|
BOARDNAME:=Generic
|
||||||
|
FEATURES+=emmc
|
||||||
|
|
|
@ -92,6 +92,16 @@ define Build/qsdk-ipq-factory-nand-askey
|
||||||
@mv $@.new $@
|
@mv $@.new $@
|
||||||
endef
|
endef
|
||||||
|
|
||||||
|
define Build/qsdk-ipq-app-gpt
|
||||||
|
cp $@ $@.tmp 2>/dev/null || true
|
||||||
|
ptgen -g -o $@.tmp -a 1 -l 1024 \
|
||||||
|
-t 0x2e -N 0:HLOS -r -p 32M \
|
||||||
|
-t 0x83 -N rootfs -r -p 128M \
|
||||||
|
-N rootfs_data -p 512M
|
||||||
|
cat $@.tmp >> $@
|
||||||
|
rm $@.tmp
|
||||||
|
endef
|
||||||
|
|
||||||
define Build/SenaoFW
|
define Build/SenaoFW
|
||||||
-$(STAGING_DIR_HOST)/bin/mksenaofw \
|
-$(STAGING_DIR_HOST)/bin/mksenaofw \
|
||||||
-n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
|
-n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
|
||||||
|
@ -520,6 +530,24 @@ define Device/glinet_gl-b1300
|
||||||
endef
|
endef
|
||||||
TARGET_DEVICES += glinet_gl-b1300
|
TARGET_DEVICES += glinet_gl-b1300
|
||||||
|
|
||||||
|
define Device/glinet_gl-b2200
|
||||||
|
$(call Device/FitzImage)
|
||||||
|
DEVICE_VENDOR := GL.iNet
|
||||||
|
DEVICE_MODEL := GL-B2200
|
||||||
|
SOC := qcom-ipq4019
|
||||||
|
DEVICE_DTS_CONFIG := config@ap.dk04.1-c3
|
||||||
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
||||||
|
IMAGES := emmc.img.gz sysupgrade.bin
|
||||||
|
IMAGE/emmc.img.gz := qsdk-ipq-app-gpt |\
|
||||||
|
pad-to 1024k | append-kernel |\
|
||||||
|
pad-to 33792k | append-rootfs |\
|
||||||
|
append-metadata | gzip
|
||||||
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||||
|
DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-glinet_gl-b2200 \
|
||||||
|
kmod-fs-ext4 kmod-mmc kmod-spi-dev mkf2fs e2fsprogs kmod-fs-f2fs
|
||||||
|
endef
|
||||||
|
TARGET_DEVICES += glinet_gl-b2200
|
||||||
|
|
||||||
define Device/glinet_gl-s1300
|
define Device/glinet_gl-s1300
|
||||||
$(call Device/FitzImage)
|
$(call Device/FitzImage)
|
||||||
DEVICE_VENDOR := GL.iNet
|
DEVICE_VENDOR := GL.iNet
|
||||||
|
|
|
@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
|
||||||
|
|
||||||
--- a/arch/arm/boot/dts/Makefile
|
--- a/arch/arm/boot/dts/Makefile
|
||||||
+++ b/arch/arm/boot/dts/Makefile
|
+++ b/arch/arm/boot/dts/Makefile
|
||||||
@@ -902,11 +902,70 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
@@ -902,11 +902,71 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
||||||
qcom-apq8074-dragonboard.dtb \
|
qcom-apq8074-dragonboard.dtb \
|
||||||
qcom-apq8084-ifc6540.dtb \
|
qcom-apq8084-ifc6540.dtb \
|
||||||
qcom-apq8084-mtp.dtb \
|
qcom-apq8084-mtp.dtb \
|
||||||
|
@ -76,6 +76,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
|
||||||
+ qcom-ipq4029-ap-303h.dtb \
|
+ qcom-ipq4029-ap-303h.dtb \
|
||||||
+ qcom-ipq4029-ap-365.dtb \
|
+ qcom-ipq4029-ap-365.dtb \
|
||||||
+ qcom-ipq4029-gl-b1300.dtb \
|
+ qcom-ipq4029-gl-b1300.dtb \
|
||||||
|
+ qcom-ipq4019-gl-b2200.dtb \
|
||||||
+ qcom-ipq4029-gl-s1300.dtb \
|
+ qcom-ipq4029-gl-s1300.dtb \
|
||||||
+ qcom-ipq4029-mr33.dtb \
|
+ qcom-ipq4029-mr33.dtb \
|
||||||
qcom-ipq8064-ap148.dtb \
|
qcom-ipq8064-ap148.dtb \
|
||||||
|
|
|
@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
|
||||||
|
|
||||||
--- a/arch/arm/boot/dts/Makefile
|
--- a/arch/arm/boot/dts/Makefile
|
||||||
+++ b/arch/arm/boot/dts/Makefile
|
+++ b/arch/arm/boot/dts/Makefile
|
||||||
@@ -837,11 +837,68 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
@@ -837,11 +837,69 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
||||||
qcom-apq8074-dragonboard.dtb \
|
qcom-apq8074-dragonboard.dtb \
|
||||||
qcom-apq8084-ifc6540.dtb \
|
qcom-apq8084-ifc6540.dtb \
|
||||||
qcom-apq8084-mtp.dtb \
|
qcom-apq8084-mtp.dtb \
|
||||||
|
@ -74,6 +74,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
|
||||||
+ qcom-ipq4029-ap-303h.dtb \
|
+ qcom-ipq4029-ap-303h.dtb \
|
||||||
+ qcom-ipq4029-ap-365.dtb \
|
+ qcom-ipq4029-ap-365.dtb \
|
||||||
+ qcom-ipq4029-gl-b1300.dtb \
|
+ qcom-ipq4029-gl-b1300.dtb \
|
||||||
|
+ qcom-ipq4019-gl-b2200.dtb \
|
||||||
+ qcom-ipq4029-gl-s1300.dtb \
|
+ qcom-ipq4029-gl-s1300.dtb \
|
||||||
+ qcom-ipq4029-mr33.dtb \
|
+ qcom-ipq4029-mr33.dtb \
|
||||||
qcom-ipq8064-ap148.dtb \
|
qcom-ipq8064-ap148.dtb \
|
||||||
|
|
Loading…
Reference in New Issue