ath79: add support for D-Link COVR-C1200 A1
The COVR-C1200 devices are sold as "Whole Home Mesh Wi-Fi" sets in packs of two (COVR-C1202) and three (COVR-C1203). Specifications: * QCA9563, 16 MiB flash, 128 MiB RAM, 2x3:2 802.11n * QCA9886 2x2:2 801.11ac Wave 2 * AR8337, 2 Gigabit ports (1: WAN; 2: LAN) * USB Type-C power connector (5V, 3A) Installation COVR Point A: * In factory reset state: OEM Web UI is at 192.168.0.50 no DHCP, skip wizard by directly accessing: http://192.168.0.50/UpdateFirmware_Simple.html * After completing setup wizard: Web UI is at 192.168.0.1 DHCP enabled, login with empty password * Flash factory.bin * Perform a factory reset to restore OpenWrt UCI defaults Installation COVR Points B: * OEM Web UI is at 192.168.0.50, no DHCP, empty password * Flash factory.bin * Perform a factory reset to restore OpenWrt UCI defaults Recovery: * Keep reset button pressed during power on * Recovery Web UI is at 192.168.0.50, no DHCP * Flash factory.bin used to work best with Chromium-based browsers or curl: curl -F firmware=@factory.bin \ http://192.168.0.50/upgrade.cgi since this fails to work on modern Linux systems, there is also a script dlink_recovery_upload.py Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
This commit is contained in:
parent
6fa2ae30bb
commit
ee69f81ca5
|
@ -0,0 +1,40 @@
|
||||||
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||||
|
|
||||||
|
#include "qca9563_dlink_covr.dtsi"
|
||||||
|
|
||||||
|
/ {
|
||||||
|
compatible = "dlink,covr-c1200-a1", "qca,qca9563";
|
||||||
|
model = "D-Link COVR-C1200 A1";
|
||||||
|
|
||||||
|
aliases {
|
||||||
|
led-boot = &led_power_orange;
|
||||||
|
led-failsafe = &led_power_red;
|
||||||
|
led-running = &led_power_white;
|
||||||
|
led-upgrade = &led_power_red;
|
||||||
|
};
|
||||||
|
|
||||||
|
leds {
|
||||||
|
compatible = "gpio-leds";
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&jtag_disable_pins>;
|
||||||
|
|
||||||
|
led_power_red: power_red {
|
||||||
|
function = LED_FUNCTION_POWER;
|
||||||
|
color = <LED_COLOR_ID_RED>;
|
||||||
|
gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
|
||||||
|
};
|
||||||
|
|
||||||
|
led_power_white: power_white {
|
||||||
|
function = LED_FUNCTION_POWER;
|
||||||
|
color = <LED_COLOR_ID_WHITE>;
|
||||||
|
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
|
||||||
|
};
|
||||||
|
|
||||||
|
led_power_orange: power_orange {
|
||||||
|
function = LED_FUNCTION_POWER;
|
||||||
|
color = <LED_COLOR_ID_ORANGE>;
|
||||||
|
gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
|
||||||
|
default-state = "on";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
|
@ -292,6 +292,10 @@ ath79_setup_interfaces()
|
||||||
ucidef_add_switch "switch0" \
|
ucidef_add_switch "switch0" \
|
||||||
"0@eth0" "2:wan" "3:lan" "4:lan"
|
"0@eth0" "2:wan" "3:lan" "4:lan"
|
||||||
;;
|
;;
|
||||||
|
dlink,covr-c1200-a1)
|
||||||
|
ucidef_add_switch "switch0" \
|
||||||
|
"0@eth0" "1:wan" "2:lan"
|
||||||
|
;;
|
||||||
dlink,covr-p2500-a1)
|
dlink,covr-p2500-a1)
|
||||||
ucidef_add_switch "switch0" \
|
ucidef_add_switch "switch0" \
|
||||||
"0@eth0" "1:lan" "2:lan" "3:wan" "4:plc"
|
"0@eth0" "1:lan" "2:lan" "3:wan" "4:plc"
|
||||||
|
@ -644,6 +648,11 @@ ath79_setup_macs()
|
||||||
devolo,magic-2-wifi)
|
devolo,magic-2-wifi)
|
||||||
label_mac=$(macaddr_add "$(mtd_get_mac_binary art 0x1002)" 3)
|
label_mac=$(macaddr_add "$(mtd_get_mac_binary art 0x1002)" 3)
|
||||||
;;
|
;;
|
||||||
|
dlink,covr-c1200-a1)
|
||||||
|
lan_mac=$(mtd_get_mac_ascii art "protest_lan_mac")
|
||||||
|
wan_mac=$(mtd_get_mac_ascii art "protest_wan_mac")
|
||||||
|
label_mac=$lan_mac
|
||||||
|
;;
|
||||||
dlink,covr-p2500-a1)
|
dlink,covr-p2500-a1)
|
||||||
lan_mac=$(mtd_get_mac_ascii art "protest_lan_mac")
|
lan_mac=$(mtd_get_mac_ascii art "protest_lan_mac")
|
||||||
wan_mac=$(mtd_get_mac_ascii art "protest_lan_mac")
|
wan_mac=$(mtd_get_mac_ascii art "protest_lan_mac")
|
||||||
|
|
|
@ -17,6 +17,7 @@ case "$board" in
|
||||||
adtran,bsap1840)
|
adtran,bsap1840)
|
||||||
macaddr_add "$(mtd_get_mac_binary 'Board data' 2)" $(($PHYNBR * 8 + 1)) > /sys${DEVPATH}/macaddress
|
macaddr_add "$(mtd_get_mac_binary 'Board data' 2)" $(($PHYNBR * 8 + 1)) > /sys${DEVPATH}/macaddress
|
||||||
;;
|
;;
|
||||||
|
dlink,covr-c1200-a1|\
|
||||||
dlink,covr-p2500-a1)
|
dlink,covr-p2500-a1)
|
||||||
[ "$PHYNBR" -eq 0 ] && \
|
[ "$PHYNBR" -eq 0 ] && \
|
||||||
mtd_get_mac_ascii art "protest_ath1_mac" > /sys${DEVPATH}/macaddress
|
mtd_get_mac_ascii art "protest_ath1_mac" > /sys${DEVPATH}/macaddress
|
||||||
|
|
|
@ -1021,6 +1021,16 @@ define Device/dlink_covr
|
||||||
append-loader-okli-uimage $(1) | pad-to 15616k
|
append-loader-okli-uimage $(1) | pad-to 15616k
|
||||||
endef
|
endef
|
||||||
|
|
||||||
|
define Device/dlink_covr-c1200-a1
|
||||||
|
$(Device/dlink_covr)
|
||||||
|
DEVICE_MODEL := COVR-C1200
|
||||||
|
DEVICE_VARIANT := A1
|
||||||
|
IMAGES += factory.bin
|
||||||
|
IMAGE/factory.bin := $$(IMAGE/recovery.bin) | \
|
||||||
|
dlink-sge-signature COVR-C1200 | dlink-sge-image COVR-C1200
|
||||||
|
endef
|
||||||
|
TARGET_DEVICES += dlink_covr-c1200-a1
|
||||||
|
|
||||||
define Device/dlink_covr-p2500-a1
|
define Device/dlink_covr-p2500-a1
|
||||||
$(Device/dlink_covr)
|
$(Device/dlink_covr)
|
||||||
DEVICE_MODEL := COVR-P2500
|
DEVICE_MODEL := COVR-P2500
|
||||||
|
|
Loading…
Reference in New Issue