From ee69f81ca5032f13e39ce7c2515ae9c5ee0a78f1 Mon Sep 17 00:00:00 2001 From: Sebastian Schaper Date: Sun, 11 Feb 2024 18:55:43 +0100 Subject: [PATCH] ath79: add support for D-Link COVR-C1200 A1 The COVR-C1200 devices are sold as "Whole Home Mesh Wi-Fi" sets in packs of two (COVR-C1202) and three (COVR-C1203). Specifications: * QCA9563, 16 MiB flash, 128 MiB RAM, 2x3:2 802.11n * QCA9886 2x2:2 801.11ac Wave 2 * AR8337, 2 Gigabit ports (1: WAN; 2: LAN) * USB Type-C power connector (5V, 3A) Installation COVR Point A: * In factory reset state: OEM Web UI is at 192.168.0.50 no DHCP, skip wizard by directly accessing: http://192.168.0.50/UpdateFirmware_Simple.html * After completing setup wizard: Web UI is at 192.168.0.1 DHCP enabled, login with empty password * Flash factory.bin * Perform a factory reset to restore OpenWrt UCI defaults Installation COVR Points B: * OEM Web UI is at 192.168.0.50, no DHCP, empty password * Flash factory.bin * Perform a factory reset to restore OpenWrt UCI defaults Recovery: * Keep reset button pressed during power on * Recovery Web UI is at 192.168.0.50, no DHCP * Flash factory.bin used to work best with Chromium-based browsers or curl: curl -F firmware=@factory.bin \ http://192.168.0.50/upgrade.cgi since this fails to work on modern Linux systems, there is also a script dlink_recovery_upload.py Signed-off-by: Sebastian Schaper --- .../ath79/dts/qca9563_dlink_covr-c1200-a1.dts | 40 +++++++++++++++++++ .../generic/base-files/etc/board.d/02_network | 9 +++++ .../etc/hotplug.d/ieee80211/10_fix_wifi_mac | 1 + target/linux/ath79/image/generic.mk | 10 +++++ 4 files changed, 60 insertions(+) create mode 100644 target/linux/ath79/dts/qca9563_dlink_covr-c1200-a1.dts diff --git a/target/linux/ath79/dts/qca9563_dlink_covr-c1200-a1.dts b/target/linux/ath79/dts/qca9563_dlink_covr-c1200-a1.dts new file mode 100644 index 0000000000..b4f0bb3b64 --- /dev/null +++ b/target/linux/ath79/dts/qca9563_dlink_covr-c1200-a1.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9563_dlink_covr.dtsi" + +/ { + compatible = "dlink,covr-c1200-a1", "qca,qca9563"; + model = "D-Link COVR-C1200 A1"; + + aliases { + led-boot = &led_power_orange; + led-failsafe = &led_power_red; + led-running = &led_power_white; + led-upgrade = &led_power_red; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&jtag_disable_pins>; + + led_power_red: power_red { + function = LED_FUNCTION_POWER; + color = ; + gpios = <&gpio 6 GPIO_ACTIVE_HIGH>; + }; + + led_power_white: power_white { + function = LED_FUNCTION_POWER; + color = ; + gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; + }; + + led_power_orange: power_orange { + function = LED_FUNCTION_POWER; + color = ; + gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 4e08860cfa..6c1cb86235 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -292,6 +292,10 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "2:wan" "3:lan" "4:lan" ;; + dlink,covr-c1200-a1) + ucidef_add_switch "switch0" \ + "0@eth0" "1:wan" "2:lan" + ;; dlink,covr-p2500-a1) ucidef_add_switch "switch0" \ "0@eth0" "1:lan" "2:lan" "3:wan" "4:plc" @@ -644,6 +648,11 @@ ath79_setup_macs() devolo,magic-2-wifi) label_mac=$(macaddr_add "$(mtd_get_mac_binary art 0x1002)" 3) ;; + dlink,covr-c1200-a1) + lan_mac=$(mtd_get_mac_ascii art "protest_lan_mac") + wan_mac=$(mtd_get_mac_ascii art "protest_wan_mac") + label_mac=$lan_mac + ;; dlink,covr-p2500-a1) lan_mac=$(mtd_get_mac_ascii art "protest_lan_mac") wan_mac=$(mtd_get_mac_ascii art "protest_lan_mac") diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index 9574d8a17d..b90e382223 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -17,6 +17,7 @@ case "$board" in adtran,bsap1840) macaddr_add "$(mtd_get_mac_binary 'Board data' 2)" $(($PHYNBR * 8 + 1)) > /sys${DEVPATH}/macaddress ;; + dlink,covr-c1200-a1|\ dlink,covr-p2500-a1) [ "$PHYNBR" -eq 0 ] && \ mtd_get_mac_ascii art "protest_ath1_mac" > /sys${DEVPATH}/macaddress diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index d5d8aa5592..e7960efbaa 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -1021,6 +1021,16 @@ define Device/dlink_covr append-loader-okli-uimage $(1) | pad-to 15616k endef +define Device/dlink_covr-c1200-a1 + $(Device/dlink_covr) + DEVICE_MODEL := COVR-C1200 + DEVICE_VARIANT := A1 + IMAGES += factory.bin + IMAGE/factory.bin := $$(IMAGE/recovery.bin) | \ + dlink-sge-signature COVR-C1200 | dlink-sge-image COVR-C1200 +endef +TARGET_DEVICES += dlink_covr-c1200-a1 + define Device/dlink_covr-p2500-a1 $(Device/dlink_covr) DEVICE_MODEL := COVR-P2500