The legacy init script had various problems in comparison with procd based
init scripts. It wasn't able to correctly track the running process
instance and thus could:
* accidentally kill another (non init controlled) daemon instance when stop
is used
* not restart the daemon depending on config changes when reload is used
* not automatically start/restart daemon when the used netdev was
created/recreated
The information about a running instance and its parameters can now be
handled by a global controller (procd). The process must not fork anymore
and leave the control to procd. The process with its parameters can then be
used by procd to trigger the stop/start of the process at the right time.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The legacy init script had various problems in comparison with procd based
init scripts. It wasn't able to correctly track the running process
instance and thus could:
* accidentally kill another (non init controlled) daemon instance when stop
is used
* not restart the daemon depending on config changes when reload is used
The information about a running instance and its parameters can now be
handled by a global controller (procd). The process must not fork anymore
and leave the control to procd. The process with its parameters can then be
used by procd to trigger the stop/start of the process at the right time.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
batctl isn't using any special rules in Build/Compile. It is cleaner to
directly use the global Build/Compile/Default instead of having a
functional similar copy in the package Makefile
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The Makefile defines the init-y variable but neither this Makefile nor
OpenWrt's common files use this variable.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
alfred isn't using any special rules in Build/Compile. It is cleaner to
directly use the global Build/Compile/Default instead of having a
functional similar copy in the package Makefile
Signed-off-by: Sven Eckelmann <sven@narfation.org>
vis isn't using any special rules in Build/Compile. It is cleaner to
directly use the global Build/Compile/Default instead of having a
functional similar copy in the package Makefile
Signed-off-by: Sven Eckelmann <sven@narfation.org>
batmand isn't using any special rules in Build/Compile. It is cleaner to
directly use the global Build/Compile/Default instead of having a
functional similar copy in the package Makefile
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The mac80211 package version was updated to a 5.2 based one in commit
0b2c42ced21a ("mac80211: Update to version 5.2-rc7"). The batman-adv module
must therefore no longer the pre-5.2 API.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Maintainer: Moritz Warning <moritzwarning@web.de>
Compiled and tested on snapshot SDK mips_24kc and arm_cortex-a5_neon-vfpv4/
* Introduce aes encryption of the query string passed to remote FAS, allowing authdir and client token to be transferred securely. Uses php-cli and php-openssl. These are required if encryption is enabled but are not dependencies [bluewavenet]
* Introduce fasremotefqdn, specifying the FQDN of the remote FAS. This facilitates simplified support for FAS operation on shared hosting systems [bluewavenet]
* Add a FAS php script supporting aes encrypted query string sent from NDS [bluewavenet]
* Numerous Documentation updates [bluewavenet]
* Remove unused pagesdir and imagesdir [mwarning]
* Add Preauth script that displays images from remote servers [bluewavenet]
* Use elegant check for valid ip addresses [mwarning]
* openwrt initscript - add missing macmechanism in the config file [lynxis]
Signed-off-by: Rob White <rob@blue-wave.net>
The ap_isolation setting only supports boolean values. So setting an empty
string as ap_isolation is not supported by batctl.
Fixes: f5205d7d24 ("batman-adv: upgrade package to latest release 2014.2.0")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
B.A.T.M.A.N. V support additional settings which are hardif specific. The
batadv_hardif proto has to expose them to allow automatic configuration.
The default configuration would be:
config interface 'bat0_hardif_eth0'
option proto 'batadv_hardif'
option master 'bat0'
option ifname 'eth0'
option mtu '1536'
option 'elp_interval' 500
# string like '1mbit' is accepted instead of kbit for override
option 'throughput_override' '0'
Signed-off-by: Sven Eckelmann <sven@narfation.org>
batctl currently supports settings which are either mesh interface or vlan
specific. But B.A.T.M.A.N. V introduced two additional settings which are
hard (slave) interface specific.
To support these, an additional command prefix called hardif is implemented
for some sysfs commands:
$ batctl -m bat0 hardif eth0 ..
The usable commands with that are:
* elp_interval
* throughput_override
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The state of slave interfaces are handled differently depending on whether
the interface is up or not. All active interfaces (IFF_UP) will transmit
OGMs. But for B.A.T.M.A.N. IV, also non-active interfaces are scheduling
(low TTL) OGMs on active interfaces. The code which setups and schedules
the OGMs must therefore already be called when the interfaces gets added as
slave interface and the transmit function must then check whether it has to
send out the OGM or not on the specific slave interface.
But v2016.3 moved the setup code from the enable function to the activate
function. The latter is called either when the added slave was already up
when batadv_hardif_enable_interface processed the new interface or when a
NETDEV_UP event was received for this slave interfac. As result, each
NETDEV_UP would schedule a new OGM worker for the interface and thus OGMs
would be send a lot more than expected.
Fixes: 549909f89d ("batman-adv: upgrade package to latest release 2016.3")
Reported-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
* support latest kernels (3.16 - 5.2)
* coding style cleanups and refactoring
* implement multicast-to-unicast support for multiple targets
* deprecate sysfs support and make it optional
* refresh DAT entry timeouts on incoming ARP Replies
* bugs squashed:
- fix multicast tt/tvlv worker locking
- drop roam tvlv handler when unregistering mesh interface
Signed-off-by: Sven Eckelmann <sven@narfation.org>
* coding style cleanups and refactoring
* add multicast_fanout setting subcommand
* implement netlink based support for remaining sysfs-only features
* drop support for deprecated log command support
* remove non-netlink support for translating MAC addresses to originators
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Maintainer: Moritz Warning <moritzwarning@web.de>
Compiled and tested on snapshot SDK mips_24kc and arm_cortex-a5_neon-vfpv4/
* Fix Issue introduced in v3.3.0 with the addition of Improvements towards usable IPv6 support, that caused CPD on client devices to fail with "Too Many Redirects" error. NDS now terminates gracefully with a console error if fasremoteip is set AND fasport=80 [bluewavenet]
* Validate fasremoteip to ensure that if it is set, then it is a valid dotted format IPv4 address [bluewavenet]
* Numerous Documentation updates [bluewavenet]
* Fix to Known Issue on OpenWrt >18.x.x with v3.3.1. This was caused by misconfigured Makefile for libmicrohttpd; this has been fixed there [bluewavenet]
Signed-off-by: Rob White <rob@blue-wave.net>
If someone like to become the maintainer, please re-submit this package
to the general openwrt package repository
https://github.com/openwrt/packages
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* support latest kernels (3.16 - 5.1)
* coding style cleanups and refactoring
* implement meshif, hardif and vlan config interface via netlink
* snoop DHCP ACKs to improve DAT cache efficiency
* bugs squashed:
- avoid potential reference counter underflows and use-after free errors for
several objects
- fix GCC warning when B.A.T.M.A.N. V is build in but cfg80211 is not
available
- reject too small VLAN packets before they are processed further
Signed-off-by: Sven Eckelmann <sven@narfation.org>
* coding style cleanups and refactoring
* introduce support for batadv meshif, hardif and vlan configuration via netlink
* replace multicast_mode with multicast_forceflood settings subcommand
* add hop_penalty setting subcommand
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Although batman-adv config is cycled in config_foreach, changes
are made in the network config. Thus, this one has to be committed.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
elektra42
Adrian Schmutzler