batctl: Provide different variants

The batctl binary is currently optional for batman-adv installations. But
new configuration settings will only be exposed via generic netlink. The
batctl tool will therefore be required to modify them.

To also fit batctl in some of the smaller devices, a new variant
batctl-tiny is build which only provides the settings subcommands. The
batctl-default variant is equal to the old batctl package and batctl-full
also provides the commands which were disabled until now.

Signed-off-by: Sven Eckelmann <sven@narfation.org>

batctl/Makefile

@@ -10,24 +10,48 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=batctl
 
 PKG_VERSION:=2018.4
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 PKG_HASH:=e43827a5e868b4e134e77ca04da989fde1981463166bf1b6f2053acc3edd6257
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=https://downloads.open-mesh.org/batman/releases/batman-adv-$(PKG_VERSION)
 PKG_LICENSE:=GPL-2.0
 
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
+
 include $(INCLUDE_DIR)/package.mk
 
-define Package/batctl
+define Package/batctl/Default
   URL:=https://www.open-mesh.org/
   SECTION:=net
   CATEGORY:=Network
   DEPENDS:=+kmod-batman-adv +libnl-tiny +libc +librt
-  TITLE:=B.A.T.M.A.N. Advanced user space configuration tool batctl
+  PROVIDES:=batctl
   MAINTAINER:=Simon Wunderlich <sw@simonwunderlich.de>
 endef
 
+define Package/batctl-tiny
+$(call Package/batctl/Default)
+  TITLE:=B.A.T.M.A.N. Advanced user space configuration tool (Minimal)
+  VARIANT:=tiny
+  PROVIDES:=batctl
+  ALTERNATIVES:=100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
+endef
+
+define Package/batctl-default
+$(call Package/batctl/Default)
+  TITLE:=B.A.T.M.A.N. Advanced user space configuration tool (Default)
+  VARIANT:=default
+  ALTERNATIVES:=200:/usr/sbin/batctl:/usr/libexec/batctl-full
+endef
+
+define Package/batctl-full
+$(call Package/batctl/Default)
+  TITLE:=B.A.T.M.A.N. Advanced user space configuration tool (Minimal)
+  VARIANT:=full
+  ALTERNATIVES:=300:/usr/sbin/batctl:/usr/libexec/batctl-full
+endef
+
 define Package/batctl/description
 batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
@@ -63,14 +87,138 @@ MAKE_BATCTL_ARGS += \
         batctl install \
         REVISION="openwrt-$(PKG_VERSION)-$(PKG_RELEASE)"
 
+config-n := \
+	aggregation \
+	ap_isolation \
+	backbonetable \
+	bisect_iv \
+	bonding \
+	bridge_loop_avoidance \
+	claimtable \
+	dat_cache \
+	distributed_arp_table \
+	event \
+	fragmentation \
+	gateways \
+	gw_mode \
+	interface \
+	isolation_mark \
+	log \
+	loglevel \
+	mcast_flags \
+	multicast_mode \
+	nc_nodes \
+	neighbors \
+	network_coding \
+	orig_interval \
+	originators \
+	ping \
+	routing_algo \
+	statistics \
+	tcpdump \
+	throughputmeter \
+	traceroute \
+	transglobal \
+	translate \
+	translocal \
+
+config-settings := \
+	aggregation \
+	ap_isolation \
+	bonding \
+	bridge_loop_avoidance \
+	distributed_arp_table \
+	fragmentation \
+	gw_mode \
+	interface \
+	isolation_mark \
+	loglevel \
+	multicast_mode \
+	network_coding \
+	orig_interval \
+	routing_algo \
+
+config-tables := \
+	backbonetable \
+	claimtable \
+	dat_cache \
+	gateways \
+	loglevel \
+	nc_nodes \
+	neighbors \
+	originators \
+	statistics \
+	transglobal \
+	translocal \
+
+config-tools := \
+	event \
+	log \
+	ping \
+	tcpdump \
+	throughputmeter \
+	traceroute \
+	translate \
+
+config-extratools := \
+	bisect_iv \
+
+ifeq ($(BUILD_VARIANT),tiny)
+
+config-y := \
+	$(config-settings) \
+
+endif
+
+ifeq ($(BUILD_VARIANT),default)
+
+config-y := \
+	$(config-settings) \
+	$(config-tables) \
+	$(config-tools) \
+
+endif
+
+ifeq ($(BUILD_VARIANT),full)
+
+config-y := \
+	$(config-settings) \
+	$(config-tables) \
+	$(config-tools) \
+	$(config-extratools) \
+
+endif
+
+define ConfigVars
+$(subst $(space),,$(foreach opt,$(config-$(1)),CONFIG_$(opt)=$(1)
+))
+endef
+
+define batctl_config
+$(call ConfigVars,n)$(call ConfigVars,y)
+endef
+$(eval $(call shexport,batctl_config))
 
 define Build/Compile
-	$(MAKE_BATCTL_ENV) $(MAKE) -C "$(PKG_BUILD_DIR)" $(MAKE_BATCTL_ARGS)
+	$(MAKE_BATCTL_ENV) $(MAKE) -C "$(PKG_BUILD_DIR)" $(MAKE_BATCTL_ARGS) \
+		$$$$$(call shvar,batctl_config)
 endef
 
-define Package/batctl/install
+define Package/batctl-tiny/install
-	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/usr/libexec
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/batctl $(1)/usr/sbin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/batctl $(1)/usr/libexec/batctl-tiny
 endef
 
-$(eval $(call BuildPackage,batctl))
+define Package/batctl-default/install
+	$(INSTALL_DIR) $(1)/usr/libexec
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/batctl $(1)/usr/libexec/batctl-default
+endef
+
+define Package/batctl-full/install
+	$(INSTALL_DIR) $(1)/usr/libexec
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/batctl $(1)/usr/libexec/batctl-full
+endef
+
+$(eval $(call BuildPackage,batctl-default))
+$(eval $(call BuildPackage,batctl-tiny))
+$(eval $(call BuildPackage,batctl-full))