src/packages/fff/fff-fastd/files/usr/lib/vpn-select.d/fastd

@@ -0,0 +1,34 @@
+protocol=fastd
+
+fastd_clear() {
+	rm /tmp/fastd_fff_peers/*
+}
+
+fastd_addpeer() {
+	[ -d /tmp/fastd_fff_peers ] || mkdir /tmp/fastd_fff_peers
+
+	# write fastd-config
+	json_get_var servername name
+	filename="/etc/fastd/fff/peers/$servername"
+	echo "#name \"${servername}\";" > "$filename"
+	json_get_var key key
+	echo "key \"${key}\";" >> "$filename"
+	json_get_var address address
+	json_get_var port port
+	echo "remote \"${address}\" port ${port};" >> "$filename"
+	echo "" >> "$filename"
+	echo "float yes;" >> "$filename"
+}
+
+fastd_start_stop() {
+	/etc/init.d/fastd reload # does nothing if fastd was not running
+
+	# fastd start/stop for various situations
+	# this is needed for first start and if fastd comes up or disappears in hoodfile
+	pidfile="/tmp/run/fastd.fff.pid"
+	if [ "$(ls /etc/fastd/fff/peers/* 2>/dev/null)" ]; then
+		([ -s "$pidfile" ] && [ -d "/proc/$(cat "$pidfile")" ]) || /etc/init.d/fastd start
+	else
+		([ -s "$pidfile" ] && [ -d "/proc/$(cat "$pidfile")" ]) && /etc/init.d/fastd stop
+	fi
+}

src/packages/fff/fff-vpn-select/files/etc/uci-defaults/58_vpn-select

@@ -0,0 +1,5 @@
+uci set fff.vpnselect=fff
+uci set fff.vpnselect.protocol_order="fastd"
+uci commit fff
+
+exit 0

src/packages/fff/fff-vpn-select/files/usr/sbin/vpn-select

@@ -1,65 +1,73 @@
 #!/bin/sh
 
 # Usage: vpn-select <path-to-hood-file>
+# To add a new protocol, put a file with three functions to /usr/lib/vpn-select.d/ .
+# The file must start with protocol=name. It is most important to use the same name here and in hoodfile.
+# Some parameters of the hood are available via $hood_id, $hood_name and $hood_protocol.
+# The old config can be cleared in function ${protocol}_clear(). It is called first once per installed protocol.
+# The function ${protocol}_addpeer() is called for every selected peer in hoodfile.
+# The function ${protocol}_start_stop() is called at the end once per installed protocol.
+#
+# The variable $protocol_order defines the order of preference. The most preffered protocol of the available and offered protocols is selected.
+# The $protocol_order is configurable via "uci fff.vpnselect.protocol_order"
+# An empty protocol_order deactivates VPN.
+
 
 . /usr/share/libubox/jshn.sh
 
 hoodfile="$1"
 
-make_config() {
-	# remove old config
-	rm /tmp/fastd_fff_peers/*
+# load protocol_order
+protocol_order="$(uci get fff.vpnselect.protocol_order)"
 
-	# prepare
-	Index=1
+# source functions
+for file in /usr/lib/vpn-select.d/*; do
+	[ -f $file ] && . "$file"
+	supported_protocols="$supported_protocols $protocol"
+done
+
+# compare $protocol_order with $supported_protocols
+for proto in $protocol_order; do
+	echo "$supported_protocols" | grep -w $proto >&/dev/null || protocol_order=${protocol_order/$proto/}
+done
+
+# clear old config
+for protocol in $supported_protocols; do
+	"${protocol}_clear"
+done
+
+# configure vpn
+
+if [ -n "$hoodfile" ] && [ -s "$hoodfile" ] ; then
 	json_load "$(cat "$hoodfile")"
+	# load hoodparameter
+	json_select hood
+	json_get_var hood_id id
+	json_get_var hood_name name
+	json_get_var hood_protocol protocol
+	json_select ".."
 	json_select vpn
-
-	# get fastd peers
-	while json_select "$Index" > /dev/null
-	do
+	json_get_keys vpn_keys
+	for k in $vpn_keys; do
+		json_select $k
 		json_get_var protocol protocol
-		if [ "$protocol" = "fastd" ]; then
-			# set up fastd
-			json_get_var servername name
-			filename="/etc/fastd/fff/peers/$servername"
-			echo "#name \"${servername}\";" > "$filename"
-			json_get_var key key
-			echo "key \"${key}\";" >> "$filename"
-			json_get_var address address
-			json_get_var port port
-			echo "remote \"${address}\" port ${port};" >> "$filename"
-			echo "" >> "$filename"
-			echo "float yes;" >> "$filename"
-		fi
+		offered_protocols="$offered_protocols $protocol"
 		json_select ".." # back to vpn
-		Index=$(( Index + 1 ))
 	done
-	json_select ".." # back to root
-}
 
-# Only do something if file is there and not empty; otherwise exit 1
-if [ -s "$hoodfile" ]; then
-	if [ ! -d /tmp/fastd_fff_peers ]; then
-		# first run after reboot
-		mkdir /tmp/fastd_fff_peers
-		make_config
-		# start fastd only if there are some peers
-		[ "$(ls /etc/fastd/fff/peers/* 2>/dev/null)" ] && /etc/init.d/fastd start
-	else
-		make_config
-		/etc/init.d/fastd reload
+	# select most preferred protocol for this hood
+	selected_protocol=$(for proto in $protocol_order; do echo $offered_protocols | grep -o $proto && break; done)
 
-		# fastd start/stop for various situations
-		pidfile="/tmp/run/fastd.fff.pid"
-		if [ "$(ls /etc/fastd/fff/peers/* 2>/dev/null)" ]; then
-			([ -s "$pidfile" ] && [ -d "/proc/$(cat "$pidfile")" ]) || /etc/init.d/fastd start
-		else
-			([ -s "$pidfile" ] && [ -d "/proc/$(cat "$pidfile")" ]) && /etc/init.d/fastd stop
-		fi
-	fi
-	exit 0
-else
-	echo "vpn-select: Hood file not found or empty!"
-	exit 1
+	# configure selected vpns
+	for key in $vpn_keys; do
+		json_select $key
+		json_get_var protocol protocol
+		[ "$protocol" = "$selected_protocol" ] && "${protocol}_addpeer"
+		json_select ".." # back to vpn
+	done
 fi
+
+# start/restart/stop vpnservices
+for protocol in $supported_protocols; do
+	"${protocol}_start_stop"
+done

src/packages/fff/fff-vpn-select/files/usr/sbin/vpn-stop

@@ -1,5 +0,0 @@
-#!/bin/sh
-
-rm /tmp/fastd_fff_peers/*
-/etc/init.d/fastd stop
-

src/packages/fff/fff-vpn-select/files/usr/sbin/vpn-stop

@@ -0,0 +1 @@
+vpn-select