1
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-06-15 19:53:59 +02:00
openwrt/target/linux/ramips/dts/mt7620a_wavlink_wl-wn579x3.dts
Michael Pratt 953bfe2eb3 ramips: mt7620: simplify DTS properties for GMAC
There are only 2 options in the driver
for the function of mt7620 internal switch port 4:

  EPHY mode (RJ-45, internal PHY)
  GMAC mode (RGMII, external PHY)

Let the DTS property be boolean instead of string
where EPHY mode is the default.

Fix how the properties are written
for all DTS that use them,
and add missing nodes where applicable,
and remove useless nodes,
and minor DTS formatting.

Signed-off-by: Michael Pratt <mcpratt@pm.me>
2021-06-23 14:22:18 +08:00

211 lines
3.2 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later
#include "mt7620a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "wavlink,wl-wn579x3", "ralink,mt7620a-soc";
model = "Wavlink WL-WN579X3";
aliases {
led-boot = &led_wps;
led-failsafe = &led_wps;
led-running = &led_wps;
led-upgrade = &led_wps;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
switch_aps {
label = "mode_aps";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
linux,input-type = <EV_SW>;
};
switch_repeater {
label = "mode_repeater";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
};
leds {
compatible = "gpio-leds";
led_wps: wps {
label = "blue:wps";
gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
};
lan {
label = "blue:lan";
gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
};
wan {
label = "blue:wan";
gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
};
wifi {
label = "blue:wifi";
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
};
/* These three form the signal wifi strength segments */
wifi_high {
label = "blue:wifi_high";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
wifi_medium {
label = "blue:wifi_medium";
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
wifi_low {
label = "blue:wifi_low";
gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
};
};
};
&gpio2 {
status = "okay";
};
&gpio3 {
status = "okay";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "config";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x790000>;
};
partition@7e0000 {
label = "board_data";
reg = <0x7e0000 0x10000>;
read-only;
};
partition@7f0000 {
label = "nvram";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&ethernet {
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
mtd-mac-address = <&factory 0x28>;
mediatek,portmap = "llllw";
port@4 {
status = "okay";
phy-handle = <&phy4>;
phy-mode = "rgmii";
};
port@5 {
status = "okay";
phy-handle = <&phy5>;
phy-mode = "rgmii";
};
mdio-bus {
status = "okay";
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii";
};
phy5: ethernet-phy@5 {
reg = <5>;
phy-mode = "rgmii";
};
};
};
&gsw {
mediatek,port4-gmac;
};
&wmac {
ralink,mtd-eeprom = <&factory 0x0>;
};
&state_default {
gpio {
groups = "ephy", "i2c", "wled", "uartf";
function = "gpio";
};
};