openwrt/target/linux/ath79
Daniel González Cabanelas 73ea763c0d ath79: Add support for Ubiquiti NanoBeam AC Gen1 XC
The Ubiquiti NanoBeam AC Gen1 XC (NBE-5AC-19) is an outdoor 802.11ac CPE
with a waterproof casing (ultrasonically welded) and bulb shaped.

Hardware:
 - SoC: Qualcomm Atheros QCA9558
 - RAM: 128 MB DDR2
 - Flash: 16 MB SPI NOR
 - Ethernet: 1x GbE, AR8033 phy connected via SGMII
 - PSU: 24 Vdc passive PoE
 - WiFi 5 GHz: Qualcomm Atheros QCA988X
 - Buttons: 1x reset
 - LEDs: 1x power, 1x Ethernet, 4x RSSI, all blue
 - Internal antenna: 19 dBi planar

Installation from stock airOS firmware:
 - Follow instructions for XC-type Ubiquiti devices on OpenWrt wiki at
   https://openwrt.org/toh/ubiquiti/common

Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
2022-02-19 13:10:01 +01:00
..
base-files/etc/hotplug.d/ieee80211 ath79: add WiFi migration for AR913x 2020-09-28 16:23:03 +02:00
dts ath79: Add support for Ubiquiti NanoBeam AC Gen1 XC 2022-02-19 13:10:01 +01:00
files ath79: add support for reset key on MikroTik RB912UAG-2HPnD 2022-01-19 16:40:12 +01:00
generic ath79: Add support for Ubiquiti NanoBeam AC Gen1 XC 2022-02-19 13:10:01 +01:00
image ath79: Add support for Ubiquiti NanoBeam AC Gen1 XC 2022-02-19 13:10:01 +01:00
mikrotik ath79: add support for Mikrotik LHG 5 2022-02-07 00:03:27 +01:00
nand ath79: support ZTE MF286 2022-02-05 12:14:08 +01:00
patches-5.10 kernel: bump 5.10 to 5.10.98 2022-02-11 23:17:40 +01:00
tiny ath79: consolidate testing kernel 2021-04-10 19:28:04 +02:00
Makefile ath79: switch to Kernel 5.10 2021-12-21 21:38:52 +01:00
config-5.10 ath79: add support for reset key on MikroTik RB912UAG-2HPnD 2022-01-19 16:40:12 +01:00
modules.mk