mirror
/
openwrt
mirror of https://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Releases Activity

ath79: Add support for Ubiquiti NanoBeam AC Gen1 XC 

The Ubiquiti NanoBeam AC Gen1 XC (NBE-5AC-19) is an outdoor 802.11ac CPE
with a waterproof casing (ultrasonically welded) and bulb shaped.

Hardware:
 - SoC: Qualcomm Atheros QCA9558
 - RAM: 128 MB DDR2
 - Flash: 16 MB SPI NOR
 - Ethernet: 1x GbE, AR8033 phy connected via SGMII
 - PSU: 24 Vdc passive PoE
 - WiFi 5 GHz: Qualcomm Atheros QCA988X
 - Buttons: 1x reset
 - LEDs: 1x power, 1x Ethernet, 4x RSSI, all blue
 - Internal antenna: 19 dBi planar

Installation from stock airOS firmware:
 - Follow instructions for XC-type Ubiquiti devices on OpenWrt wiki at
   https://openwrt.org/toh/ubiquiti/common

Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
This commit is contained in:
Daniel González Cabanelas 2022-01-16 19:00:19 +01:00 committed by Petr Štetiar
parent 66071729a2
commit 73ea763c0d
5 changed files with 124 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

111
target/linux/ath79/dts/qca9558_ubnt_nanobeam-ac-xc.dts Normal file
View File

@ -0,0 +1,111 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Device Tree file for Ubiquiti Nanobeam NBE-5AC-19 (XC)
*
* Copyright (C) 2022 Daniel González Cabanelas <dgcbueu@gmail.com>
* based on device tree from qca9558_ubnt_powerbeam-5ac-500.dts
*/
#include "qca955x_ubnt_xc.dtsi"
/ {
compatible = "ubnt,nanobeam-ac-xc", "ubnt,xc", "qca,qca9558";
model = "Ubiquiti NanoBeam AC Gen1 (XC)";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
led_spi {
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
sck-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
mosi-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
cs-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
led_gpio: led_gpio@0 {
compatible = "fairchild,74hc595";
reg = <0>;
gpio-controller;
#gpio-cells = <2>;
registers-number = <1>;
spi-max-frequency = <10000000>;
enable-gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
rssi0 {
label = "blue:rssi0";
gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
};
rssi1 {
label = "blue:rssi1";
gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
};
rssi2 {
label = "blue:rssi2";
gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
};
rssi3 {
label = "blue:rssi3";
gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
};
led_power: power {
label = "blue:power";
gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
};
&mdio0 {
status = "okay";
phy-mask = <4>;
phy4: ethernet-phy@4 {
phy-mode = "sgmii";
reg = <4>;
at803x-override-sgmii-link-check;
};
};
&eth0 {
status = "okay";
pll-reg = <0 0x48 0>;
pll-data = <0x03000000 0x00000101 0x00001313>;
nvmem-cells = <&macaddr_art_0>;
nvmem-cell-names = "mac-address";
phy-mode = "sgmii";
phy-handle = <&phy4>;
};
&art {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_art_0: macaddr@0 {
reg = <0x0 0x6>;
};
};

1
target/linux/ath79/generic/base-files/etc/board.d/01_leds
View File

@ -414,6 +414,7 @@ trendnet,tew-823dru)
ubnt,bullet-ac|\
ubnt,nanobeam-ac|\
ubnt,nanobeam-ac-gen2|\
ubnt,nanobeam-ac-xc|\
ubnt,nanostation-ac|\
ubnt,powerbeam-5ac-gen2)
ucidef_set_rssimon "wlan0" "200000" "1"

2
target/linux/ath79/generic/base-files/etc/board.d/02_network
View File

@ -85,6 +85,7 @@ ath79_setup_interfaces()
ubnt,lap-120|\
ubnt,litebeam-ac-gen2|\
ubnt,nanobeam-ac|\
ubnt,nanobeam-ac-xc|\
ubnt,nanobridge-m|\
ubnt,nanostation-ac-loco|\
ubnt,nanostation-loco-m|\
@ -714,6 +715,7 @@ ath79_setup_macs()
;;
ubnt,litebeam-ac-gen2|\
ubnt,nanobeam-ac-gen2|\
ubnt,nanobeam-ac-xc|\
ubnt,powerbeam-5ac-500|\
ubnt,powerbeam-5ac-gen2)
label_mac=$(mtd_get_mac_binary art 0x5006)

1
target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@ -37,6 +37,7 @@ case "$FIRMWARE" in
ubnt,litebeam-ac-gen2|\
ubnt,nanobeam-ac|\
ubnt,nanobeam-ac-gen2|\
ubnt,nanobeam-ac-xc|\
ubnt,nanostation-ac|\
ubnt,nanostation-ac-loco|\
ubnt,powerbeam-5ac-500|\

9
target/linux/ath79/image/generic-ubnt.mk
View File

@ -246,6 +246,15 @@ define Device/ubnt_nanobeam-ac-gen2
endef
TARGET_DEVICES += ubnt_nanobeam-ac-gen2
define Device/ubnt_nanobeam-ac-xc
$(Device/ubnt-xc)
SOC := qca9558
DEVICE_MODEL := NanoBeam AC
DEVICE_VARIANT := Gen1 (XC)
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct rssileds
endef
TARGET_DEVICES += ubnt_nanobeam-ac-xc
define Device/ubnt_nanobridge-m
$(Device/ubnt-xm)
SOC := ar7241