Go to file
Gabor Juhos 047a51c4fd ar7: switch to 3.3 and mark the target as broken
SVN-Revision: 31616
2012-05-05 17:32:41 +00:00
docs kamikaze has been released long ago 2011-02-11 14:04:00 +00:00
include include/kernel-defaults: set V='' if c is not set in OPENWRT_VERBOSE 2012-05-05 12:48:35 +00:00
package package/ar7-atm: allow to build on 3.3 2012-05-05 17:32:33 +00:00
scripts ext-toolchain.sh: don't pass CFLAGS when wrapping ld 2012-05-01 22:45:55 +00:00
target ar7: switch to 3.3 and mark the target as broken 2012-05-05 17:32:41 +00:00
toolchain switch to 2.6.38 2012-05-01 07:00:17 +00:00
tools firmware-utils/mktplinkfw: add support for the TL-WR1041N v2 2012-05-05 17:02:38 +00:00
.gitignore .gitignore: Ignore Emacs editor generated files 2011-10-31 09:37:59 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in make xz ramdisk images also available for 2.6.39+ 2012-04-18 15:14:05 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile abort built in prereq target if there is no site config file for the current target 2012-01-19 12:19:28 +00:00
README trying to make README file a bit more helpful 2012-01-21 01:15:24 +00:00
feeds.conf.default Add xorg feed to feeds.conf.default 2011-11-16 16:05:23 +00:00
rules.mk Use build suffix on build_dir paths 2012-04-10 10:55:55 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org