Commit Graph

59904 Commits

Author SHA1 Message Date
Sungbo Eo 7e04a611bc ramips: add NMBM support for ipTIME AX2004M
AX2004M uses NMBM on its NAND flash, but it was not enabled in DTS as the
device support [1] had been added before NMBM feature in mtk_bmt driver [2].
Let's enable it now.

With this change, there is a low possibility of boot failure after
sysupgrade from older versions. As AX2004M already has gone through
two stable releases in the meantime, it would be safe to warn users
by bumping DEVICE_COMPAT_VERSION.

[1] 37753f34ac ("ramips: add support for ipTIME AX2004M")
[2] 06382d1af7 ("kernel: add support for mediatek NMBM flash mapping support")

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2024-03-10 16:32:14 +09:00
Shiji Yang 97f542238a mac80211: rtl8xxxu: sync with linux-next 20240229
Backporting upstream patches to improve RTL8188F support.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2024-03-09 23:42:37 +01:00
Shiji Yang 860dd27617 firmware: add firmware package for Realtek RTL8188FU
Realtek RTL8188F is an 802.11n 1x1 USB Wi-Fi adapter. It has been
supported by the upstream rtl8xxxu driver since Linux 6.2 kernel.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2024-03-09 23:42:37 +01:00
Sebastian Schaper ee69f81ca5 ath79: add support for D-Link COVR-C1200 A1
The COVR-C1200 devices are sold as "Whole Home Mesh Wi-Fi"
sets in packs of two (COVR-C1202) and three (COVR-C1203).

Specifications:
 * QCA9563, 16 MiB flash, 128 MiB RAM, 2x3:2 802.11n
 * QCA9886 2x2:2 801.11ac Wave 2
 * AR8337, 2 Gigabit ports (1: WAN; 2: LAN)
 * USB Type-C power connector (5V, 3A)

Installation COVR Point A:
 * In factory reset state: OEM Web UI is at 192.168.0.50
   no DHCP, skip wizard by directly accessing:
     http://192.168.0.50/UpdateFirmware_Simple.html
 * After completing setup wizard: Web UI is at 192.168.0.1
     DHCP enabled, login with empty password
 * Flash factory.bin
 * Perform a factory reset to restore OpenWrt UCI defaults

Installation COVR Points B:
 * OEM Web UI is at 192.168.0.50, no DHCP, empty password
 * Flash factory.bin
 * Perform a factory reset to restore OpenWrt UCI defaults

Recovery:
 * Keep reset button pressed during power on
 * Recovery Web UI is at 192.168.0.50, no DHCP
 * Flash factory.bin
   used to work best with Chromium-based browsers or curl:
     curl -F firmware=@factory.bin \
       http://192.168.0.50/upgrade.cgi
   since this fails to work on modern Linux systems,
   there is also a script dlink_recovery_upload.py

Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
2024-03-09 20:00:11 +01:00
Sebastian Schaper 6fa2ae30bb ath79: split dtsi for D-Link COVR-P2500
in preparation of adding COVR-C1200

Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
2024-03-09 20:00:11 +01:00
Christian Lamparter 7241a91c94 firmware: intel-microcode: update to 20231114
Debian changelog:

intel-microcode (3.20231114.1) unstable; urgency=medium

  * New upstream microcode datafile 20231114 (closes: #1055962)
    Mitigations for "reptar", INTEL-SA-00950 (CVE-2023-23583)
    Sequence of processor instructions leads to unexpected behavior for some
    Intel(R) Processors, may allow an authenticated user to potentially enable
    escalation of privilege and/or information disclosure and/or denial of
    service via local access.
    Note: "retvar" on 4th gen Xeon Scalable (sig 0x806f8 pfm 0x87), 12th gen
    Core mobile (sig 0x906a4 pfm 0x80), 13th gen Core desktop (sig 0xb0671 pfm
    0x01) were already mitigated by a previous microcode update.
  * Fixes for unspecified functional issues
  * Updated microcodes:
    sig 0x000606a6, pf_mask 0x87, 2023-09-01, rev 0xd0003b9, size 299008
    sig 0x000606c1, pf_mask 0x10, 2023-09-08, rev 0x1000268, size 290816
    sig 0x000706e5, pf_mask 0x80, 2023-09-03, rev 0x00c2, size 113664
    sig 0x000806c1, pf_mask 0x80, 2023-09-07, rev 0x00b4, size 111616
    sig 0x000806c2, pf_mask 0xc2, 2023-09-07, rev 0x0034, size 98304
    sig 0x000806d1, pf_mask 0xc2, 2023-09-07, rev 0x004e, size 104448
    sig 0x000806f8, pf_mask 0x87, 2023-06-16, rev 0x2b0004d0, size 572416
    sig 0x000806f8, pf_mask 0x87, 2023-06-16, rev 0x2b0004d0
    sig 0x000806f7, pf_mask 0x87, 2023-06-16, rev 0x2b0004d0
    sig 0x000806f6, pf_mask 0x87, 2023-06-16, rev 0x2b0004d0
    sig 0x000806f5, pf_mask 0x87, 2023-06-16, rev 0x2b0004d0
    sig 0x000806f4, pf_mask 0x87, 2023-06-16, rev 0x2b0004d0
    sig 0x000806f8, pf_mask 0x10, 2023-06-26, rev 0x2c000290, size 605184
    sig 0x000806f8, pf_mask 0x10, 2023-06-26, rev 0x2c000290
    sig 0x000806f6, pf_mask 0x10, 2023-06-26, rev 0x2c000290
    sig 0x000806f5, pf_mask 0x10, 2023-06-26, rev 0x2c000290
    sig 0x000806f4, pf_mask 0x10, 2023-06-26, rev 0x2c000290
    sig 0x00090672, pf_mask 0x07, 2023-06-07, rev 0x0032, size 222208
    sig 0x00090672, pf_mask 0x07, 2023-06-07, rev 0x0032
    sig 0x00090675, pf_mask 0x07, 2023-06-07, rev 0x0032
    sig 0x000b06f2, pf_mask 0x07, 2023-06-07, rev 0x0032
    sig 0x000b06f5, pf_mask 0x07, 2023-06-07, rev 0x0032
    sig 0x000906a3, pf_mask 0x80, 2023-06-07, rev 0x0430, size 220160
    sig 0x000906a3, pf_mask 0x80, 2023-06-07, rev 0x0430
    sig 0x000906a4, pf_mask 0x80, 2023-06-07, rev 0x0430
    sig 0x000906a4, pf_mask 0x40, 2023-05-05, rev 0x0005, size 117760
    sig 0x000a0671, pf_mask 0x02, 2023-09-03, rev 0x005d, size 104448
    sig 0x000b0671, pf_mask 0x32, 2023-08-29, rev 0x011d, size 210944
    sig 0x000b06a2, pf_mask 0xe0, 2023-08-30, rev 0x411c, size 216064
    sig 0x000b06a2, pf_mask 0xe0, 2023-08-30, rev 0x411c
    sig 0x000b06a3, pf_mask 0xe0, 2023-08-30, rev 0x411c
    sig 0x000b06e0, pf_mask 0x11, 2023-06-26, rev 0x0012, size 136192
  * Updated 2023-08-08 changelog entry:
    Mitigations for "retvar" on a few processors, refer to the 2023-11-14
    entry for details.  This information was disclosed in 2023-11-14.
  * source: update symlinks to reflect id of the latest release, 20231114

 -- Henrique de Moraes Holschuh <hmh@debian.org>  Thu, 16 Nov 2023 08:09:43 -0300

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2024-03-09 20:00:11 +01:00
Christian Lamparter 0671803bc5 Revert "ipq-wifi: fix upstream board-2.bin ZTE M289F snafu"
This reverts commit 75505c5ec7.
The issue has been fixed upstream.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2024-03-09 20:00:11 +01:00
Daniel Golle 330316f056 mediatek: linksys-e8450: improve compat warning
Include a statement about having to run the installer in the
sysupgrade compat warning for the Linksys E8450 (UBI).

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-03-09 14:02:58 +00:00
Daniel Golle cd4de3251c mediatek: wait for fitblk rootfs
Probing of the fitblk driver in some situations happens after the kernel
attempts to mount rootfs, which then fails.
Always use 'rootwait' when using fitblk for rootfs.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-03-09 14:02:58 +00:00
Daniel Golle efa71c532e uboot-mediatek: add 'rootwait' to bootargs where needed
Probing of the fitblk driver in some situations happens after Linux
attempts to mount rootfs, which then fails.
Always use 'rootwait' kernel parameter when using fitblk for rootfs.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-03-09 13:59:58 +00:00
Felix Fietkau 1f5fd5cb97 mac80211: fix a regression in the broadcast AQL patch
The AQL limit for buffered broadcast packets is higher than the maximum
total pending airtime limit. This can get unicast data stuck whenever there
is too much pending broadcast data. Fix this by excluding broadcast AQL from
the total limit.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-03-08 22:46:32 +01:00
Felix Fietkau e3bb01b30e mbedtls: enable threading support
Fixes libssh, which requires it. Bump ABI_VERSION, since enabling this
option affects data structures in mbedtls include files.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-03-08 22:46:32 +01:00
INAGAKI Hiroshi 8efd1f98a9 ath79: cleanup and enable uart1 on ELECOM WAB-I1750-PS
Cleanup uart1-related node on ELECOM WAB-I1750-PS and enable it for
"SERIAL" port on the case.

"SERIAL" port can be used for OpenWrt console by adding the following
line to /etc/inittab and rebooting:

ttyATH1::askfirst:/usr/libexec/login.sh

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2024-03-08 17:35:01 +01:00
INAGAKI Hiroshi a9f780a78e ath79: drop unnecessary &uart node from dtsi of QCA955x devices
&uart (uart0) is already enabled in qca955x.dtsi by default.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2024-03-08 17:35:01 +01:00
INAGAKI Hiroshi bb6d11e534 ath79: add aliases to qca955x.dtsi for uart0/1
Add aliases with "serialN = &uartN;" of uart0/1 on QCA955x SoCs to
qca955x.dtsi, to enable uart1 on Linux Kernel.

without this:

[    0.342915] ar933x-uart 18500000.uart: unable to get alias id, err=-19

Additionally, remove "serial0 = &uart;" alias from QCA955x device
dts/dtsi files.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2024-03-08 17:35:01 +01:00
INAGAKI Hiroshi 35ae18fc06 ath79: add HighSpeed UART (uart1) support for QCA955x
Add HighSpeed UART support to QCA955x series SoCs as a secondary UART
(uart1). This UART is compatible with qca,ar9330-uart.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2024-03-08 17:35:01 +01:00
INAGAKI Hiroshi e0ee4195fc ath79: rename label of primary UART on QCA955x to "uart0"
Rename the DT label of the primary UART on Qualcomm Atheros QCA955x
series SoCs to "uart0" from "uart" for the preparation to add HighSpeed
UART (uart1) support.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2024-03-08 17:35:01 +01:00
Christian Lamparter 102009f3ea mpc85xx: p1020: convert Aerohive AP330/AP350 to simpleImage
with 6.1, the kernel no longer fitted into the 16 MiB and
kicking down the can and increasing KERNEL_SIZE to 20 MiB
didn't help as the device failed to boot.

Using 'kernel-bin | gzip | uimage gzip' didn't work since the
uboot does not have enough heap to decompress these big kernels.

And finally playing around with uboot was more a hassle than
converting this device to take the simpleImage-boot-route in
the future.

Note: The device now takes even longer on the first boot-up after
the flash due to JFFS2 initializing all the remaining flash.
Be prepared to wait up to 10 minutes before the green status LED
stops blinking and will shine a solid green!

(On the plus site: the device now has ~10 MiB of additional
space for rootfs+rootfs_data).

Note2: This patch includes a kernel patch refresh.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2024-03-08 17:24:14 +01:00
Pawel Dembicki a99dfd195e mpc85xx: add 6.1 testing kernel
Configure 6.1 testing kernel for mpc85xx target.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-03-08 17:24:13 +01:00
Pawel Dembicki 6a8b831593 mpc85xx: p1010: change wrapper address of simple image devices
Kernel and initramfs size grows. Now uncompressed initramfs image and
regular kernel image overlaps configured area:

Initramfs:
  WRAP    arch/powerpc/boot/simpleImage.br200-wp
INFO: Uncompressed kernel (size 0x1428688) overlaps the address of the
wrapper(0x1000000)
INFO: Fixing the link_address of wrapper to (0x1500000)
  WRAP    arch/powerpc/boot/simpleImage.tl-wdr4900-v1
INFO: Uncompressed kernel (size 0x1428688) overlaps the address of the
wrapper(0x1000000)
INFO: Fixing the link_address of wrapper to (0x1500000)
  WRAP    arch/powerpc/boot/simpleImage.ws-ap3715i
INFO: Uncompressed kernel (size 0x1428688) overlaps the address of the
wrapper(0x1000000)
INFO: Fixing the link_address of wrapper to (0x1500000)

Regular image:
  WRAP    arch/powerpc/boot/simpleImage.br200-wp
INFO: Uncompressed kernel (size 0x10e0688) overlaps the address of the
wrapper(0x1000000)
INFO: Fixing the link_address of wrapper to (0x1100000)
  WRAP    arch/powerpc/boot/simpleImage.tl-wdr4900-v1
INFO: Uncompressed kernel (size 0x10e0688) overlaps the address of the
wrapper(0x1000000)
INFO: Fixing the link_address of wrapper to (0x1100000)
  WRAP    arch/powerpc/boot/simpleImage.ws-ap3715i
INFO: Uncompressed kernel (size 0x10e0688) overlaps the address of the
wrapper(0x1000000)
INFO: Fixing the link_address of wrapper to (0x1100000)

Let's change wrapper address to safe value.

Tested on: TL-WDR4900, BR200-WP

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-03-08 17:24:13 +01:00
Pawel Dembicki 894ff58067 mpc85xx: kernel: refresh 6.1 config
Kernel config needs to be refreshed after copy from 5.15.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-03-08 17:24:13 +01:00
Pawel Dembicki 44ed2dc91c mpc85xx: refresh 6.1 patches
Most changes done by "make target/linux/refresh"

Manually refreshed:
102-powerpc-add-cmdline-override.patch

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-03-08 17:24:13 +01:00
Pawel Dembicki 7b01179e62 mpc85xx: copy patches 5.15 to 6.1
Just copy of config.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-03-08 17:24:13 +01:00
Pawel Dembicki 123daef93c mpc85xx: copy config 5.15 to 6.1
Simple copy of patches.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-03-08 17:24:13 +01:00
Pawel Dembicki 3361ff9572 mpc85xx: Get rid of 'of_flat_dt_is_compatible'
This patch replaces 'of_flat_dt_is_compatible' with 'of_machine_is_compatible'.
The TL-WDR4900 platform file won't compile in the 6.1 kernel. The platform
files for the rest of the routers have been reworked or based on newer
solutions.

Let's make the TL-WDR4900 consistent with them.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-03-08 17:24:13 +01:00
Robert Marko ce2b302ca4 kernel: crypto: use ARM64 SHA256 CE optimized module for more targets
At start I only set qualcommax to use the Crypto Extensions optimized
version of SHA256 as I knew it supports the optional Crypto Extensions.

However, after looking into the tree there are more targets/subtargets
that I could find at least a specification sheet that says the support
Cryptographic Extensions, so lets add them.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-08 17:16:18 +01:00
Robert Marko 90c09ede93 kernel: crypto: use ARM64 SHA1 CE optimized module for more targets
At start I only set qualcommax to use the Crypto Extensions optimized
version of SHA1 as I knew it supports the optional Crypto Extensions.

However, after looking into the tree there are more targets/subtargets
that I could find at least a specification sheet that says the support
Cryptographic Extensions, so lets add them.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-08 17:16:18 +01:00
Hauke Mehrtens 9cfa5f7417 lantiq: Fix build after kernel 5.15.150
This fixes the following compile problem:
````
  CC      arch/mips/kernel/vpe-mt.o
arch/mips/kernel/vpe-mt.c: In function 'vpe_run':
arch/mips/kernel/vpe-mt.c:32:23: error: unused variable 'physical_memsize' [-Werror=unused-variable]
   32 |         unsigned long physical_memsize = 0L;
      |                       ^~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:289: arch/mips/kernel/vpe-mt.o] Error 1
````

physical_memsize was removed from upstream kernel, see:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=5b4f6c5ff65c8551018ccea40c569afd759734c0

Fixes: 387fde0da0 ("kernel: bump 5.15 to 5.15.150")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-03-08 14:49:09 +01:00
Christian Marangi abbe909569
libiwinfo: update to Git HEAD (2024-03-08)
163a640fef30 devices: add device id for Qualcomm Atheros QCA6174
8ffb8bfd1115 devices: add add Qualcomm Atheros IPQ6018 WiSoC compatible

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-03-08 14:26:34 +01:00
Furong Xu 22f24f9107 mediatek: clean duplicated #include in Xiaomi Redmi AX6000's dts
Clean duplication of #include <dt-bindings/leds/common.h>.
Thanks musashino205

Fixes: 1493e8f8cb ("mediatek: convert LED color/function format for Xiaomi Redmi AX6000")
Signed-off-by: Furong Xu <xfr@outlook.com>
2024-03-08 16:51:35 +08:00
Qingfang Deng a646e4f697 kernel: enable KASAN option for more architectures
KASAN has supported more architectures, such as ARM, PPC32 and RISC-V 64.
Enable KASAN option for those architectures.

Signed-off-by: Qingfang Deng <dqfext@gmail.com>
2024-03-08 16:07:48 +08:00
Sergey Ponomarev 9da90971ab ubox: make logread as an alternative
The logread can be replaced with syslog-ng.
To support this it should be an alternative itself.

Signed-off-by: Sergey Ponomarev <stokito@gmail.com>
2024-03-08 15:38:37 +08:00
Furong Xu 8d355b870a mediatek: filogic: switch to fitblk for Xiaomi Redmi AX6000
Use the new fitblk driver.

Run-tested: filogic/mt7986a-xiaomi-redmi-router-ax6000-ubootmod

Signed-off-by: Furong Xu <xfr@outlook.com>
2024-03-08 15:28:30 +08:00
Furong Xu 1493e8f8cb mediatek: convert LED color/function format for Xiaomi Redmi AX6000
Commit 2d63d42f5e ("mediatek: convert to new LED color/function
format where possible") leaves Xiaomi Redmi AX6000 un-converted,
the two LEDs become dead.
Now, LEDs are alive again.

Fixes: 2d63d42f5e ("mediatek: convert to new LED color/function
format where possible")

Signed-off-by: Furong Xu <xfr@outlook.com>
2024-03-08 15:26:57 +08:00
Tony Ambardar 4adba64156 kernel: 6.1: add missing config symbol for tracing
Add missing option CONFIG_FPROBE to generic config, found building x86_64
arch with tracing enabled.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2024-03-07 21:07:26 +01:00
Hauke Mehrtens 662e052588 linux-firmware: Update to version 20240220
This updates the following firmware files:
airoha-en8811h-firmware/lib/firmware/airoha/EthMD32.DSP.bin
airoha-en8811h-firmware/lib/firmware/airoha/EthMD32.dm.bin
amdgpu-firmware (Many files)
ar3k-firmware/lib/firmware/qca/hpnv21.bin
ar3k-firmware/lib/firmware/qca/hpnv21g.bin
ath10k-board-qca4019/lib/firmware/ath10k/QCA4019/hw1.0/board-2.bin
ath10k-board-qca9888/lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
ath10k-firmware-qca6174/lib/firmware/ath10k/QCA6174/hw3.0/firmware-6.bin
ath11k-firmware-wcn6750/lib/firmware/ath11k/WCN6750/hw1.0/board-2.bin
ath11k-firmware-wcn6855/lib/firmware/ath11k/WCN6855/hw2.0/amss.bin
ath11k-firmware-wcn6855/lib/firmware/ath11k/WCN6855/hw2.0/board-2.bin
ath11k-firmware-wcn6855/lib/firmware/ath11k/WCN6855/hw2.1/amss.bin
ath11k-firmware-wcn6855/lib/firmware/ath11k/WCN6855/hw2.1/board-2.bin
ibt-firmware/lib/firmware/intel/ibt-0040-0041.ddc
ibt-firmware/lib/firmware/intel/ibt-0040-0041.sfi
ibt-firmware/lib/firmware/intel/ibt-0040-1050.sfi
ibt-firmware/lib/firmware/intel/ibt-0040-4150.sfi
ibt-firmware/lib/firmware/intel/ibt-0041-0041.sfi
ibt-firmware/lib/firmware/intel/ibt-0180-0041.sfi
ibt-firmware/lib/firmware/intel/ibt-0180-1050.sfi
ibt-firmware/lib/firmware/intel/ibt-0180-4150.sfi
ibt-firmware/lib/firmware/intel/ibt-1040-0041.sfi
ibt-firmware/lib/firmware/intel/ibt-1040-4150.sfi
iwlwifi-firmware-be200/lib/firmware/iwlwifi-gl-c0-fm-c0-83.ucode
iwlwifi-firmware-be200/lib/firmware/iwlwifi-gl-c0-fm-c0.pnvm

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-03-07 19:37:36 +01:00
Hauke Mehrtens cd450923ab kernel: Remove unused schedulers
These schedulers were removed in kernel 5.15.150 and 6.1.180.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-03-07 19:30:54 +01:00
Hauke Mehrtens 387fde0da0 kernel: bump 5.15 to 5.15.150
Removed because it is upstream:
bcm53xx/patches-5.15/030-v5.16-0019-ARM-dts-BCM53573-Describe-on-SoC-BCM53125-rev-4-swit.patch
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=cb1003c07e746e4e82bdd3959c9ea37018ed41a3

Removed because it is upstream:
bcm53xx/patches-5.15/037-v6.6-0004-ARM-dts-BCM53573-Drop-nonexistent-default-off-LED-tr.patch
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c65a23e98e38dc991f495d6bdb3cfa6163a88a0c

Removed because it is upstream:
bcm53xx/patches-5.15/037-v6.6-0005-ARM-dts-BCM53573-Drop-nonexistent-usb-cells.patch
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=71475bcee001cae3844644c2787eef93b26489d1

Adapted hack-5.15/650-netfilter-add-xt_FLOWOFFLOAD-target.patch to match
the changes from the upstream flow offload patch:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=7c71b831220edeab7ce603d818dc1708d9ea4137

Manually Adapted the following patch:
bcm53xx/patches-5.15/035-v6.2-0004-ARM-dts-broadcom-align-LED-node-names-with-dtschema.patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-03-07 19:30:54 +01:00
Hauke Mehrtens 26d1d52403 kernel: bump 5.15 to 5.15.149
Removed because it is upstream:
generic/pending-5.15/540-ksmbd-only-v2-leases-handle-the-directory.patch
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=81ea755b8fa57ce186f56f14b709cf491c2a5505

Manually Adapted the following patch:
ath79/patches-5.15/900-unaligned_access_hacks.patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-03-07 19:30:54 +01:00
Robert Marko e247763617 ath25: drop target
ath25 has been on life support for the last couple of releases, eventually
leading to marking it as source-only in 2023.

It has been basically only touched to do a kernel bump so that we can make
the new OpenWrt release which was a challenge due to small RAM amount.

However, with the attempt of kernel 6.1 update it turns out that kernel
cannot even finish booting due to RAM constraints, so its time to let this
target go.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-07 12:15:51 +01:00
Sven Eckelmann 71411cb8b8 ath11k-firmware: Move from kvalo to new upstream repository
It was announced [1] that the original staging repositories are no longer
used for staging of new firmware binaries. And that the old repository will
be removed [2] in June 2024.

The ath11k-firmware package must therefore point to the new repository
before the old one is no longer accessible.

[1] https://lore.kernel.org/r/bac97f31-4a70-4c4c-8179-4ede0b32f869@quicinc.com
[2] 8d2cc160f3

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2024-03-07 09:37:42 +01:00
Robert Marko 5b1d6d4607 kernel: crypto: add SHA512 ARM64 ASM optimized module
Kernel has an ASM optimized version of SHA512 that was ported from
OpenSSL, so lets package it as it provides significant perfomance
improvement compared to the generic implementation.

There is a Cryptographic Extension based version as well, but that relies
on ARMv8.2 ISA which I am not aware any of the OpenWrt supported SoC-s use.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-06 22:00:58 +01:00
Robert Marko 4443470a57 kernel: crypto: add SHA2(224 and 256) ARM64 CE optimized module
Kernel has optimized version of SHA2(224 and 256) using the ARMv8 Crypto
Extensions, so lets package it.

Use it by default for qualcommax as it uses Cortex-A53 core and has ARMv8
CE extensions present.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-06 18:38:28 +01:00
Robert Marko 09207c0348 kernel: crypto: add SHA256 ARM64 ASM optimized module
Kernel has an ASM optimized version of SHA256 that was ported from
OpenSSL, so lets package it as it provides significant perfomance
improvement compared to the generic implementation.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-06 18:30:21 +01:00
Robert Marko 9425064bdb kernel: crypto: add SHA1 ARM64 CE optimized module
Kernel has optimized version of SHA1 using the ARMv8 Crypto Extensions,
so lets package it.

Use it by default for qualcommax as it uses Cortex-A53 core and has ARMv8
CE extensions present.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-06 12:16:11 +01:00
Weijie Gao d40d64fc62 cryptodev-linux: update to 1.13
Update to 1.13 with upstream backports.

Signed-off-by: Weijie Gao <hackpascal@gmail.com>
2024-03-06 10:17:45 +01:00
Robert Marko fdb563c1a5 kernel: qca-ssdk: refresh PCS patch
Recently added PCS patch requires a refresh, so lets do it.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-05 21:43:54 +01:00
Robert Marko 3e6f64d443 kernel: crypto: package SHA3
SHA3 is now required by jitterentropy_rng in kernel 6.6, so lets start
preparing by packaging SHA3 support as its supported in 5.15 and 6.1
kernels as well.

AFAIK, only ARMv8.2 has a crypto extension for SHA3, however I am not aware
of any SoC we support that uses ARMv8.2 ISA so its not enabled currently.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-05 20:23:46 +01:00
Rafał Miłecki 4efbfcd996 base-files: sysupgrade: handle errors when generating backup
1. Return error if any step of generating tar file fails
2. Use pipefail to avoid calling "gzip" if tar failed

Fixes: e36cc53092 ("base-files: sysupgrade: use tar helper to include installed_packages.txt")
Reported-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Cc: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Cc: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2024-03-05 11:54:55 +01:00
Dirk Buchwalder 93610492b6 qualcommax: ipq60xx: add support for netgear wax214
Netgear WAX214 is a 802.11 ax dual-band AP
    with PoE. (similar to Engenius EWS357APV3)

    Specifications:

        •     CPU: Qualcomm IPQ6010 Quad core Cortex-A53
        •     RAM: 512MB of DDR3
        •     Storage: 128MB NAND (Macronix MX30UF1G18AC)
        •     Ethernet: 1x 1G RJ45 port (QCA8072) PoE
        •     WIFI:
              2.4GHz: Qualcomm QCN5022 2x2 802.11b/g/n/ax 574 Mbps PHY rate
              5GHz: Qualcomm QCN5052 2x2 802.11a/b/g/n/ac/ax 1201 PHY rate

        •     LEDs:
              4 x GPIO-controlled LEDs
                - 1 Power LED (orange)
                - 1 LAN LED (blue)
                - 1 WIFI 5g LED (blue)
                - 1 WIFI 2g LED (blue)
                black_small_square  Buttons: 1x soft reset
                black_small_square  Power: 12V DC jack or PoE (802.3af )

            An populated serial header is onboard, format is
             1.25mm 4p (DF13A-4P-1.25H)
            RX/TX is working, bootwait is active, secure boot is not
            enabled.

            The root password of the stock firmware is unknown,
            but failsafe mode can be entered to reset the password.

            Installation Instructions:

                - obtain serial access
                - stop auto boot (press "4", Entr boot command line
		  interface)
                - setenv active_fw 0 (to boot from the primary rootfs,
                  or set to 1 to boot from the secondary rootfs
                  partition)
                - saveenv

                - tftpboot the initramfs image
                - bootm

                - copy
		  openwrt-qualcommax-ipq60xx-netgear_wax214-squashfs-factory.ubi
                  to the device
                - write the image to the NAND:
                   - cat /proc/mtd and look for rootfs partition (should
		     be mtd11,
                     or mtd12 if you choose active_fw 1)
                   - ubiformat /dev/mtd11 -f -y
		     openwrt-qualcommax-ipq60xx-netgear_wax214-squashfs-factory.ubi
                - reboot

            Note: the firmware is senao-based. But I was unable to build
                  a valid senao-header into the image.
                  Maybe they changed the header format and senaoFW isn't
                  working any more.

Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de>
2024-03-05 06:34:35 +01:00