Commit Graph

43232 Commits

Author SHA1 Message Date
Hauke Mehrtens 02324da206 tools/sdimage: Fix build with host Linux headers < 3.18
The ufb tool needs the host UAPI Linux headers from kernel 3.18
or later, remove it for now as it is not used anyway.

Fixes: 4bf5c4395b ("tools/sdimage: update to latest git version")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-16 14:03:35 +01:00
Hauke Mehrtens 9e7c4702a1 mbedtls: fix compilation on ARM < 6
mbedtls uses some instructions introduced in ARMv6 which are not
available in older architectures.

Fixes: 3f7dd06fd8 ("mbedtls: Update to 2.14.1")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-16 14:03:06 +01:00
NOGUCHI Hiroshi 83a97c53fa ramips: add support for Netgear R6350
Netgear R6350 is a wireless router, aka Netgear AC1750.

Specification:
- SoC: Mediatek MT7621AT (2 CPU cores, 4 threads)
- RAM: 128MiB (Nanya NT5CC64M16GP-DI)
- ROM: 128MiB NAND Flash (Macronix MX30LF1G18AC-TI)
- Wireless:
   for 11b/g/n (upto 300Mbps): MT7603
   for 11a/ac  (upto 1450Mbps) : MT7615, is not avaliable now
- Ethernet LAN speed: up to 1000Mbps
- Ethernet LAN ports: 4
- Ethernet WAN speed: up to 1000Mbps
- Ethernet WAN ports: 1
- USB ports: 1 (USB 2.0)
- LEDs: 4 (all can be controlled by SoC's GPIO)
- buttons: 2
- serial ports: unknown

Installation through telnet:
  - Copy kernel.bin and rootfs.bin to a USB flash disk,
    plug to usb port on the router.
  - Enable telnet with link: http://192.168.1.1/setup.cgi?todo=debug
    (login if required, default: admin password)
  - You will see "Debug Enabled!"
  - Telnet 192.168.1.1 and login with "root"
  - ls /mnt/shares/ to find out path of your USB disk.
    'myUdisk' for example.
  - cd /mnt/shares/myUdisk
  - mtd_write write rootfs.bin Rootfs
  - mtd_write write kernel.bin Kernel
  - reboot

recovery when bricked:
  nmrpflash can be used to recover to the netgear firmware
  if a broken image was flashed.

The SC_PART_MAP partition suggests that an on flash partition table
exists. After implementing a partition parser/builder for the sercom
partition format, the definitions don't match the flash layout used by
the stock firmware.

It either means the partition format has not yet been completely
understood or it isn't used by the stock firmware. For now, use fixed
partitions instead.

Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com>
[apply latest ramips changes and document the on flash partition map
issues]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-12-16 08:41:41 +01:00
Daniel Santos 9850e42284 jffs2: Fix use of uninitialized delayed_work, lockdep breakage
I've sent this one upstream.  This patch is critical if you want to run
with "prove lock correctness" (lockdep) and you happen to have certain
mtd devices.  The misuse of the uninitialized object is undefined
behaviour, but being zeroed it does not appear to have actually broken
anything other than the lockdep engine.

Signed-off-by: Daniel Santos <daniel.santos@pobox.com>
2018-12-16 01:18:48 +01:00
Michael Heimpold 4bf5c4395b tools/sdimage: update to latest git version
This includes code cleanups and fixes some portability issues,
compiler warnings about printf arguments etc.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2018-12-16 00:57:20 +01:00
Roman Bazalevsky f332ae3c43 kernel/modules: HMC5843 3D-compass kernel module support enabled.
Signed-off-by: Roman Bazalevsky <rvb@rvb.name>
2018-12-16 00:57:20 +01:00
Daniel Engberg 3f7dd06fd8 mbedtls: Update to 2.14.1
Update mbedtls to 2.14.1

This fixes:
* CVE-2018-19608: Local timing attack on RSA decryption

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
[Update to 2.14.1]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-16 00:57:20 +01:00
Brett Mastbergen 2b6eab507a netfilter: Add fib support for nftables
Signed-off-by: Brett Mastbergen <bmastbergen@untangle.com>
2018-12-16 00:57:20 +01:00
Anderson Luiz Alves 0c3c944d1e kernel: mv88e6060: disable hardware level MAC learning
Disable Marvell's hardware level MAC learning because it breaks station roaming.

When enabled it drops all frames that arrive from a MAC address
that is on a different port at learning table.

Problem description:
Multiple APs with inter-AP roaming connected to different ports,
when station moves from one AP on one port to another AP on another port,
traffic flow breaks down because the learning table is not updated.

Signed-off-by: Anderson Luiz Alves <alacn1@gmail.com>
[Replaced with upstream version, move to generic]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-16 00:57:20 +01:00
Deng Qingfang 18501889f6 kernel: add mv88e61xx switch port-mirroring support
Compile & run tested on mvebu

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
2018-12-16 00:57:20 +01:00
Deng Qingfang b88ce25e81 mt76: fix dependencies
Only MT76x0U needs kmod-mt76x02-usb

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
2018-12-16 00:57:20 +01:00
Rosen Penev 1e98d985bb swconfig: Add missing include
Fixes these warnings:

swlib.c:455:18: warning: implicit declaration of function 'isspace'
swlib.c:461:9: warning: implicit declaration of function 'isdigit'

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-12-16 00:57:19 +01:00
Rosen Penev d2b16a59d5 f2fs-tools: Update to 1.12.0
Added two upstream mailing list patches that fix behavior under big endian
systems. Issue was present since version 1.11.0.

Tested on Turris Omnia.

Original discussion: https://github.com/openwrt/openwrt/pull/1575

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-12-16 00:57:19 +01:00
Andre Heider 5d501e54fc lantiq: add integer latency stat for lantiq-dsl
The current stats always have a 'ms' suffix, and they're used by luci.
Introduce dsl.latency_[down|up] values, exported in µs without suffix.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2018-12-16 00:57:19 +01:00
Ben Greear d8f861f408 rtl8812au: Add out-of-tree driver.
Use a forked version of the rtl8812au driver that works better
with OpenWRT (fix compile bugs, fix phy MAC address, etc)

Signed-off-by: Ben Greear <greearb@candelatech.com>
[update to 2018-11-16, replace rtw_byteorder.h, rename folder]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-16 00:57:19 +01:00
Eneas U de Queiroz cb4d00d184 omcproxy: fix compilation on little-endian CPUs
Don't use cpu_to_be32 outside of a function.

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-12-16 00:57:19 +01:00
Marcin Jurkowski 3c3eaa57d9 ath79: add support for TP-Link TL-WR842N/ND v1 router
This ports support for TP-Link TL-WR842N/ND v1 from ar71xx.

CPU: Atheros AR7241 400 MHz
RAM: 32 MiB
FLASH: 8 MiB
PORTS: 4 Port 100/10 Switch, 1 Port 100/10 Wan
WiFi: Atheros AR9287
LED: SYS, WiFi, LAN, WAN, 3G, QSS
BTN: WiFi, Reset/WPS

AR71xx target used "tl-mr3420" as board id so force flag is needed
if upgrading from old target.

Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [trivial cleanup]
2018-12-15 21:35:45 +01:00
Christian Lamparter 330965b342 ipq806x: add ath10k calibration data MAC addresses patching
Ben Greear reported in his patch:
|Subject: netgear r7800: Fix mac address of radios.
|
|Reloading the driver causes the phyX to change, and that
|caused the MAC address to change.

This is because all ODM/OEMs except QCA bothered to write
the correct MAC address for the ath10k wifi into the
calibration data.

This patch copies over the MAC patching helper functions from ipq40xx's
target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
file and converts all the devices to patch the correct MACs into the
extracted calibration data before it gets sent to the driver, which sets
up the device with the correct MAC address. It also removes the entries
in the 10_fix_wifi_mac file as they have served their purpose for good.

Please note the C2600: There is conflicting information on what
the offset for the second wifi is supposed to be. This patch uses
what was specified in 10_fix_wifi_mac.

According to Ben Greear this method is save to use with the
stock firmware too. As he explained that the stock firmware
messes up rx-bssid mask calculation when the MAC is changed
after the first vif is created.

Reported-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-12-15 21:06:11 +01:00
Mathias Kresin dd5e7d6c50 ramips: mt7620: add usb packages
Add the usb drivers for all boards with enabled ochi/ehci node in the
dts file.

Fixes: FS#1987

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-12-15 20:02:07 +01:00
Mathias Kresin 30c07a5675 ramips: mt7620: remove unnecessary usb packages
These are either installed as dependency or not required at all.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-12-15 20:02:07 +01:00
Mathias Kresin e04d352d63 ramips: mt7620: add usb ohci driver
Add the USB 1.1 driver for all boards not having a fixed USB 2.0
device attached to the USB bus.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-12-15 20:02:07 +01:00
Deng Qingfang 47381aadd5 ramips: several fixes for HC5x61
- Mark other partitions as read-only for HC5x61

 - Only enable USB and PCIe for HC5761/HC5861
   HC5661 doesn't have a USB port, and there is nothing attached to its PCIe.

 - Fix HC5761 switch ports
   HC5761 has only 3 ethernet ports (1x WAN + 2x LAN). Remove unused ports.

 - Fix HC5861 5GHz radio
   HC5861 has MT7612EN 5GHz WiFi chip, not MT7610EN.

 - Fix HC5761/HC5861 WiFi LEDs
   After 5GHz is enabled, it becomes wlan0. And 2.4GHz would be wlan1.

 - Fix HC5x61 image size
   It should be 15872k (0xf80000)

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
2018-12-15 20:02:07 +01:00
Christian Lamparter 10ad6d6e07 ipq40xx: integrate ath10kcal_patch_mac into ath10kcal_patch_mac_crc
In the thread: "ipq806x: add ath10k calibration data MAC addresses patching"
Chuanhong Guo <gch981213@gmail.com> noted that:
"All ath10k calibration data have a checksum at 0x2.
ath10kcal_patch_mac works for QCA9880/QCA9882 only because
the ath10k firmware for these two chips doesn't check the
checksum value. (QCA proprietary driver checks this and
refuses to use caldata with incorrect checksum.)"

This patch updates 11-ath10k-caldata of the ipq40xx target accordingly.

Reported-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-12-15 19:02:00 +01:00
Michael Yartys cc5c63f217 ath10k-firmware: update all CT firmware variants
Wave-1 firmware (988x, 9887): bug fixes
Wave-2 firmware (4019, 9888, 99x0, 9984): fix protected management frames, rate-ctrl fixes, and performance improvements

Signed-off-by: Michael Yartys <michael.yartys@gmail.com>
2018-12-15 15:25:24 +01:00
Hauke Mehrtens 4df3c71cd4 ath10k-ct: Update to 2018-12-11 and use version based on 4.19
This updates the ath10k-ct driver to the version from 2018-12-11 and
selects the ath10k-ct version based on kernel 4.19 by default.

CONFIG_ATH10K_CE was introduced between kernel 4.16 and 4.19 and is a
mandatory option.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 15:25:23 +01:00
Hauke Mehrtens af1aa07b07 gcc: update to version 7.4.0
This updates the GCC to the next minor release which fixes 178 bugs.
The two removed patches are included in gcc 7.4.0

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-12-15 15:25:03 +01:00
Hauke Mehrtens fbaf48387e kernel: netfilter: chain filters merged into nf_tables.ko
In mainline kernel commit 02c7b25e5f5 ("netfilter: nf_tables: build-in
filter chain type") all chain filters were merged into one file and into
one kernel module to save some memory. The code protected by these
configuration options CONFIG_NF_TABLES_BRIDGE, CONFIG_NF_TABLES_IPV4,
CONFIG_NF_TABLES_ARP, CONFIG_NF_TABLES_IPV6, CONFIG_NF_TABLES_NETDEV and
CONFIG_NF_TABLES_INET was merged into the nft_chain_filter.c file which
is now always compiled into the nf_tables.ko file.

This only happened in kernel 4.19 and OpenWrt has to select these as
modules in older kennel versions. Mark them as build-in in the kernel
4.19 specific kernel configuration file which will then not be
overwritten by the package specific settings which try to make them
modular again.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 14:28:50 +01:00
Hauke Mehrtens f891670704 kernel: netfilter: Adapt merge ipv4/ipv6 masquerade code
In kernel commit 0168e8b361 ("netfilter: nat: merge ipv4/ipv6 masquerade
code into main nat module") the CONFIG_NF_NAT_MASQUERADE_IPV4 and
CONFIG_NF_NAT_MASQUERADE_IPV6 kernel configuration option were changed
to bool and the code will not be compiled as a own module any more, but
it will be integrated into nf_nat_ipv4.ko or nf_nat_ipv6.ko to save some
memory.

Activate these options as bool in the generic kernel 4.19 configuration
only, to always build them into the nf_nat_ipv*.ko modules. The kmod
file will still try to select them as module, but the generic
configuration will not be overwritten.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 14:28:50 +01:00
Hauke Mehrtens f72f793c9e kernel: netfilter: Add nf_conncount.ko
Some kernel modules from kmod-ipt-conntrack-extra depend on
nf_conncount.ko, which was added in kernel 4.16, add it to the kmod.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 14:28:50 +01:00
Hauke Mehrtens 89806545cc kernel: netfilter: Add nf_tproxy_ipv{4,6} and nf_socket_ipv{4,6}
The nf_socket.ko module was split in commit 8db4c5be88f ("netfilter:
move socket lookup infrastructure to nf_socket_ipv{4,6}.c") into a
common, n IPv4 and an IPv6 part.
The nf_tproxy.ko module was split in commit 45ca4e0cf27 ("netfilter:
Libify xt_TPROXY") into a common, an IPv4 and an IPv6 part.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 14:28:50 +01:00
Hauke Mehrtens 35929059b7 kernel: netfilter: Add nf_defrag_ipv6.ko to NF_CONNTRACK on 4.19
In kernel commit a0ae2562c6c ("netfilter: conntrack: remove l3proto
abstraction") The modules nf_conntrack_ipv4.ko, nf_conntrack_ipv6.ko and
nf_conntrack.ko were squashed together into one module. This module now
depends on nf_defrag_ipv6 when IPv6 support was activated. This is part
of the main netfilter packages, so add nf_defrag_ipv6.ko also to the
default netfilter packages on kernel 4.19 and later.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 14:28:50 +01:00
Hauke Mehrtens d234431c0c kernel: Make CONFIG_NVMEM tristate
CONFIG_OF_NET depends on CONFIG_NVMEM in kernel 4.19. To fix some build
problems in mainline Linux kernel CONFIG_NVMEM was changed from tristate
to bool in commit 2a37ce25d9 ("nvmem: disallow modular CONFIG_NVMEM").

This patch in OpenWrt revert the upstream commit and changes
CONFIG_NVMEM back to tristate we just have to make sure to build this in
for all targets which select CONFIG_OF_NET.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 14:28:50 +01:00
Hauke Mehrtens 4c9df2aa08 kernel: tg3: Do not depend on kmod-hwmon-core on kernel 4.19
Like on kernel 4.14 this dependency is deactivated in OpenWrt.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 14:28:50 +01:00
Hauke Mehrtens 31abe08331 kernel: Add missing dependency to kmod-regmap
Like on kernel 4.14 some kernel modules depend now on regmap.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 14:28:50 +01:00
Hauke Mehrtens 7eabe0e433 kernel: Make video-gspca-core depend on vidobuf2
This new dependency is needed for kernel 4.19.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 14:28:49 +01:00
Hauke Mehrtens edc4da5da1 kernel: Always activate CONFIG_HW_RANDOM_TPM
CONFIG_HW_RANDOM_TPM does not activate a separate kernel module any
more, but it only activates the random code in the tpm.ko.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 14:28:49 +01:00
Hauke Mehrtens c8f85a866b kernel: Make kmod-mpls depend on iptunnel in kernel 4.19
This new dependency is needed with kernel 4.19.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 14:28:49 +01:00
Hauke Mehrtens 59065da634 kernel: Adapt to move of autofs4 in kernel 4.19
autofs4 is now in the fs/autofs/ folder in kernel 4.19

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 14:28:49 +01:00
Hauke Mehrtens b688ec6433 kernel: Adapt to new location of video-videobuf2 in kernel 4.19
The video-videobuf2 kernel modules were moved to a new folder in kernel
4.19. videobuf2-v4l2.ko is only available since kernel 4.4, blacklist
this kmod completely on kernel 3.18.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 14:28:49 +01:00
Hauke Mehrtens f125706596 kernel: Add dependencies for kernel 4.19
These dependencies are needed on kernel 4.14 and kernel 4.19.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 14:28:49 +01:00
Hauke Mehrtens 6505b084cb kernel: Use crypto_simd.ko instead of lrw.ko for x86
The x86 optimized cryptographic algorithm kernel modules now mostly use
crypto_simd.ko instead of lrw.ko in kernel 4.19. Add the new module to
the kmod-crypto-misc package.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 14:28:49 +01:00
Hauke Mehrtens 5f67559b42 kernel: Remove crypto/ablk_helper.ko on kernel 4.19
This module was removed in kernel 4.17, all users are refactored to not
need this any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 14:28:49 +01:00
Hauke Mehrtens 35e0f600d8 kernel: extract asn1_decoder.ko
The asn1_decoder.ko module is needed by the kmod-nf-nathelper-extra
package in kernel 4.19, extract it and add the missing dependencies.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 14:28:49 +01:00
Hauke Mehrtens 36bf45ff4a kernel: add missing dependency to kmod-crypto-acompress
Like kernel on 4.14 some modules need the dependency to
kmod-crypto-acompress on kernel 4.19.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 14:28:49 +01:00
Hauke Mehrtens 583d65ebfe kernel: Adapt to moved kvaser_usb.ko in kernel 4.19
In kernel 4.19 the kvaser_usb.ko file moved into its own directory.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 14:28:48 +01:00
Hauke Mehrtens 4ff4411031 kernel: Use kmod-dax on kernel 4.19
Like on kernel 4.14 kmod-dax is needed by kmod-dm also in kernel 4.19.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 14:28:48 +01:00
Hauke Mehrtens 6ca336479d i2c-gpio-custom: Adapt to moved include file
The i2c-gpio.h file was moved in kernel 4.18.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 14:28:48 +01:00
Hauke Mehrtens a116b8e0b6 kernel: Deactivate *-gpio-custom drivers for 4.19
Kernel interface changed with kernel 4.19, it does not accept raw GPIO
numbers any more. Deactivate these drivers on kernel 4.19 for now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 14:28:48 +01:00
Hauke Mehrtens 7ffa42246b kernel: Add kmod-phy-realtek
The r8169 driver uses the phy lib with the realtek phy driver in kernel
4.19 instead of integrating the phy driver into the mac driver.
Add the new phy driver and add this missing dependency.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 14:28:48 +01:00
Hauke Mehrtens e30ea44f68 kernel: Remove deprecated generic linux,part-probe patch
This is now replaced by some other mtd partition parsing which was
merged into upstream.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-15 14:28:48 +01:00