mirror
/
openwrt
mirror of https://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Releases Activity

kernel: bump 5.4 to 5.4.179 

Many changes were done in drivers/pinctrl/bcm/pinctrl-bcm2835.c between
5.4.171 and 5.4.179.
The following 3 patches do not apply any more:
* target/linux/bcm27xx/patches-5.4/950-0316-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch
  This was already integrated in kernel v5.4-rc1, it was never needed.

* target/linux/bcm27xx/patches-5.4/950-0328-Revert-pinctrl-bcm2835-Pass-irqchip-when-adding-gpio.patch
* target/linux/bcm27xx/patches-5.4/950-0362-pinctrl-bcm2835-Change-init-order-for-gpio-hogs.patch
I think these were done to fix the problem which was really fixed in
commit 75278f1aff5e ("pinctrl: bcm2835: Change init order for gpio
hogs") from v5.4.175

target/linux/generic/backport-5.4/716-v5.5-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch
Move fwnode_device_is_available to the same position as in kernel 5.10.

target/linux/layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch
Applied in commit 65816c1034769e714edb70f59a33bc5472d9e55f ("arm64: dts:
ls1028a-qds: move rtc node to the correct i2c bus")

Compile-tested: lantiq/xrx200, bcm27xx/bcm2710
Run-tested: lantiq/xrx200

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Hauke Mehrtens 2022-02-12 16:01:04 +00:00
parent a4c0c031b8
commit c6ddf8d502
71 changed files with 153 additions and 420 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
include/kernel-version.mk
View File

@ -6,9 +6,9 @@ ifdef CONFIG_TESTING_KERNEL
KERNEL_PATCHVER:=$(KERNEL_TESTING_PATCHVER)
endif
LINUX_VERSION-5.4 = .171
LINUX_VERSION-5.4 = .179
LINUX_KERNEL_HASH-5.4.171 = afbcc8ed7d85485af299567f307b03057ffff3ec7bee02a21c33933d435b4958
LINUX_KERNEL_HASH-5.4.179 = 2c9bdec0922a95aff34e8d53d2e0ecf7e842033cd908d2959a43d34afb5d897d
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))

4
target/linux/bcm27xx/patches-5.4/950-0018-Register-the-clocks-early-during-the-boot-process-so.patch
View File

@ -13,7 +13,7 @@ Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -2267,8 +2267,15 @@ static int bcm2835_clk_probe(struct plat
@@ -2262,8 +2262,15 @@ static int bcm2835_clk_probe(struct plat
if (ret)
return ret;
@ -30,7 +30,7 @@ Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
}
static const struct cprman_plat_data cprman_bcm2835_plat_data = {
@@ -2294,7 +2301,11 @@ static struct platform_driver bcm2835_cl
@@ -2289,7 +2296,11 @@ static struct platform_driver bcm2835_cl
.probe = bcm2835_clk_probe,
};

2
target/linux/bcm27xx/patches-5.4/950-0020-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch
View File

@ -14,7 +14,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -1381,6 +1381,11 @@ bcm2835_register_pll_divider(struct bcm2
@@ -1376,6 +1376,11 @@ bcm2835_register_pll_divider(struct bcm2
divider->div.hw.init = &init;
divider->div.table = NULL;

14
target/linux/bcm27xx/patches-5.4/950-0021-clk-bcm2835-Add-claim-clocks-property.patch
View File

@ -17,7 +17,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -1311,6 +1311,8 @@ static const struct clk_ops bcm2835_vpu_
@@ -1306,6 +1306,8 @@ static const struct clk_ops bcm2835_vpu_
.debug_init = bcm2835_clock_debug_init,
};
@ -26,7 +26,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman,
const struct bcm2835_pll_data *data)
{
@@ -1327,6 +1329,9 @@ static struct clk_hw *bcm2835_register_p
@@ -1322,6 +1324,9 @@ static struct clk_hw *bcm2835_register_p
init.ops = &bcm2835_pll_clk_ops;
init.flags = CLK_IGNORE_UNUSED;
@ -36,7 +36,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
pll = kzalloc(sizeof(*pll), GFP_KERNEL);
if (!pll)
return NULL;
@@ -1382,8 +1387,10 @@ bcm2835_register_pll_divider(struct bcm2
@@ -1377,8 +1382,10 @@ bcm2835_register_pll_divider(struct bcm2
divider->div.table = NULL;
if (!(cprman_read(cprman, data->cm_reg) & data->hold_mask)) {
@ -49,7 +49,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
}
divider->cprman = cprman;
@@ -2191,6 +2198,8 @@ static const struct bcm2835_clk_desc clk
@@ -2186,6 +2193,8 @@ static const struct bcm2835_clk_desc clk
.ctl_reg = CM_PERIICTL),
};
@ -58,7 +58,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
/*
* Permanently take a reference on the parent of the SDRAM clock.
*
@@ -2210,6 +2219,19 @@ static int bcm2835_mark_sdc_parent_criti
@@ -2205,6 +2214,19 @@ static int bcm2835_mark_sdc_parent_criti
return clk_prepare_enable(parent);
}
@ -78,7 +78,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
static int bcm2835_clk_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -2220,6 +2242,7 @@ static int bcm2835_clk_probe(struct plat
@@ -2215,6 +2237,7 @@ static int bcm2835_clk_probe(struct plat
const size_t asize = ARRAY_SIZE(clk_desc_array);
const struct cprman_plat_data *pdata;
size_t i;
@ -86,7 +86,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
int ret;
pdata = of_device_get_match_data(&pdev->dev);
@@ -2239,6 +2262,13 @@ static int bcm2835_clk_probe(struct plat
@@ -2234,6 +2257,13 @@ static int bcm2835_clk_probe(struct plat
if (IS_ERR(cprman->regs))
return PTR_ERR(cprman->regs);

8
target/linux/bcm27xx/patches-5.4/950-0022-clk-bcm2835-Read-max-core-clock-from-firmware.patch
View File

@ -50,7 +50,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
spinlock_t regs_lock; /* spinlock for all clocks */
unsigned int soc;
@@ -1015,6 +1019,30 @@ static unsigned long bcm2835_clock_get_r
@@ -1010,6 +1014,30 @@ static unsigned long bcm2835_clock_get_r
return bcm2835_clock_rate_from_divisor(clock, parent_rate, div);
}
@ -81,7 +81,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
static void bcm2835_clock_wait_busy(struct bcm2835_clock *clock)
{
struct bcm2835_cprman *cprman = clock->cprman;
@@ -1303,7 +1331,7 @@ static int bcm2835_vpu_clock_is_on(struc
@@ -1298,7 +1326,7 @@ static int bcm2835_vpu_clock_is_on(struc
*/
static const struct clk_ops bcm2835_vpu_clock_clk_ops = {
.is_prepared = bcm2835_vpu_clock_is_on,
@ -90,7 +90,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
.set_rate = bcm2835_clock_set_rate,
.determine_rate = bcm2835_clock_determine_rate,
.set_parent = bcm2835_clock_set_parent,
@@ -2241,6 +2269,7 @@ static int bcm2835_clk_probe(struct plat
@@ -2236,6 +2264,7 @@ static int bcm2835_clk_probe(struct plat
const struct bcm2835_clk_desc *desc;
const size_t asize = ARRAY_SIZE(clk_desc_array);
const struct cprman_plat_data *pdata;
@ -98,7 +98,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
size_t i;
u32 clk_id;
int ret;
@@ -2262,6 +2291,14 @@ static int bcm2835_clk_probe(struct plat
@@ -2257,6 +2286,14 @@ static int bcm2835_clk_probe(struct plat
if (IS_ERR(cprman->regs))
return PTR_ERR(cprman->regs);

2
target/linux/bcm27xx/patches-5.4/950-0023-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch
View File

@ -20,7 +20,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net>
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -1473,6 +1473,15 @@ static struct clk_hw *bcm2835_register_c
@@ -1468,6 +1468,15 @@ static struct clk_hw *bcm2835_register_c
init.flags = data->flags | CLK_IGNORE_UNUSED;
/*

2
target/linux/bcm27xx/patches-5.4/950-0027-mm-Remove-the-PFN-busy-warning.patch
View File

@ -14,7 +14,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net>
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -8512,8 +8512,6 @@ int alloc_contig_range(unsigned long sta
@@ -8514,8 +8514,6 @@ int alloc_contig_range(unsigned long sta
/* Make sure the range is really isolated. */
if (test_pages_isolated(outer_start, end, false)) {

2
target/linux/bcm27xx/patches-5.4/950-0031-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch
View File

@ -14,7 +14,7 @@ use the same logic.
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2578,7 +2578,12 @@ static int pl011_setup_port(struct devic
@@ -2557,7 +2557,12 @@ static int pl011_setup_port(struct devic
if (IS_ERR(base))
return PTR_ERR(base);

6
target/linux/bcm27xx/patches-5.4/950-0032-amba_pl011-Round-input-clock-up.patch
View File

@ -59,7 +59,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
/* Clear pending error and receive interrupts */
pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS |
@@ -2324,7 +2341,7 @@ static int pl011_console_setup(struct co
@@ -2303,7 +2320,7 @@ static int pl011_console_setup(struct co
plat->init();
}
@ -68,7 +68,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
if (uap->vendor->fixed_options) {
baud = uap->fixed_baud;
@@ -2509,6 +2526,7 @@ static struct uart_driver amba_reg = {
@@ -2488,6 +2505,7 @@ static struct uart_driver amba_reg = {
.cons = AMBA_CONSOLE,
};
@ -76,7 +76,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
static int pl011_probe_dt_alias(int index, struct device *dev)
{
struct device_node *np;
@@ -2540,6 +2558,7 @@ static int pl011_probe_dt_alias(int inde
@@ -2519,6 +2537,7 @@ static int pl011_probe_dt_alias(int inde
return ret;
}

2
target/linux/bcm27xx/patches-5.4/950-0034-amba_pl011-Add-cts-event-workaround-DT-property.patch
View File

@ -36,7 +36,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
- reg
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2665,6 +2665,11 @@ static int pl011_probe(struct amba_devic
@@ -2644,6 +2644,11 @@ static int pl011_probe(struct amba_devic
if (IS_ERR(uap->clk))
return PTR_ERR(uap->clk);

2
target/linux/bcm27xx/patches-5.4/950-0035-pinctrl-bcm2835-Set-base-to-0-give-expected-gpio-num.patch
View File

@ -11,7 +11,7 @@ Signed-off-by: Noralf Tronnes <notro@tronnes.org>
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -350,7 +350,7 @@ static const struct gpio_chip bcm2835_gp
@@ -359,7 +359,7 @@ static const struct gpio_chip bcm2835_gp
.get = bcm2835_gpio_get,
.set = bcm2835_gpio_set,
.set_config = gpiochip_generic_config,

2
target/linux/bcm27xx/patches-5.4/950-0037-Add-dwc_otg-driver.patch
View File

@ -1040,7 +1040,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
}
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -5379,7 +5379,7 @@ static void port_event(struct usb_hub *h
@@ -5382,7 +5382,7 @@ static void port_event(struct usb_hub *h
port_dev->over_current_count++;
port_over_current_notify(port_dev);

8
target/linux/bcm27xx/patches-5.4/950-0089-cgroup-Disable-cgroup-memory-by-default.patch
View File

@ -17,7 +17,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
--- a/kernel/cgroup/cgroup.c
+++ b/kernel/cgroup/cgroup.c
@@ -5744,6 +5744,9 @@ int __init cgroup_init_early(void)
@@ -5749,6 +5749,9 @@ int __init cgroup_init_early(void)
return 0;
}
@ -27,7 +27,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
/**
* cgroup_init - cgroup initialization
*
@@ -5782,6 +5785,12 @@ int __init cgroup_init(void)
@@ -5787,6 +5790,12 @@ int __init cgroup_init(void)
mutex_unlock(&cgroup_mutex);
@ -40,7 +40,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
for_each_subsys(ss, ssid) {
if (ss->early_init) {
struct cgroup_subsys_state *css =
@@ -6191,6 +6200,10 @@ static int __init cgroup_disable(char *s
@@ -6196,6 +6205,10 @@ static int __init cgroup_disable(char *s
strcmp(token, ss->legacy_name))
continue;
@ -51,7 +51,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
static_branch_disable(cgroup_subsys_enabled_key[i]);
pr_info("Disabling %s control group subsystem\n",
ss->name);
@@ -6200,6 +6213,31 @@ static int __init cgroup_disable(char *s
@@ -6205,6 +6218,31 @@ static int __init cgroup_disable(char *s
}
__setup("cgroup_disable=", cgroup_disable);

2
target/linux/bcm27xx/patches-5.4/950-0177-clk-clk-bcm2835-Use-zd-when-printing-size_t.patch
View File

@ -13,7 +13,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -2354,7 +2354,7 @@ static int bcm2835_clk_probe(struct plat
@@ -2349,7 +2349,7 @@ static int bcm2835_clk_probe(struct plat
return ret;
/* note that we have registered all the clocks */

2
target/linux/bcm27xx/patches-5.4/950-0208-bcmgenet-Better-coalescing-parameter-defaults.patch
View File

@ -27,7 +27,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
/* Disable rate control for now */
bcmgenet_tdma_ring_writel(priv, index, flow_period_val,
TDMA_FLOW_PERIOD);
@@ -3574,9 +3574,12 @@ static int bcmgenet_probe(struct platfor
@@ -3576,9 +3576,12 @@ static int bcmgenet_probe(struct platfor
netif_set_real_num_rx_queues(priv->dev, priv->hw_params->rx_queues + 1);
/* Set default coalescing parameters */

4
target/linux/bcm27xx/patches-5.4/950-0216-clk-bcm2835-Add-support-for-setting-leaf-clock-rates.patch
View File

@ -14,7 +14,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net>
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -1114,15 +1114,19 @@ static int bcm2835_clock_set_rate(struct
@@ -1109,15 +1109,19 @@ static int bcm2835_clock_set_rate(struct
spin_lock(&cprman->regs_lock);
@ -42,7 +42,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net>
ctl |= (div & CM_DIV_FRAC_MASK) ? CM_FRAC : 0;
cprman_write(cprman, data->ctl_reg, ctl);
@@ -1494,7 +1498,7 @@ static struct clk_hw *bcm2835_register_c
@@ -1489,7 +1493,7 @@ static struct clk_hw *bcm2835_register_c
init.ops = &bcm2835_vpu_clock_clk_ops;
} else {
init.ops = &bcm2835_clock_clk_ops;

10
target/linux/bcm27xx/patches-5.4/950-0217-clk-bcm2835-Allow-reparenting-leaf-clocks-while-they.patch
View File

@ -15,7 +15,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net>
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -1103,8 +1103,10 @@ static int bcm2835_clock_on(struct clk_h
@@ -1098,8 +1098,10 @@ static int bcm2835_clock_on(struct clk_h
return 0;
}
@ -28,7 +28,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net>
{
struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
struct bcm2835_cprman *cprman = clock->cprman;
@@ -1126,6 +1128,11 @@ static int bcm2835_clock_set_rate(struct
@@ -1121,6 +1123,11 @@ static int bcm2835_clock_set_rate(struct
bcm2835_clock_wait_busy(clock);
}
@ -40,7 +40,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net>
ctl &= ~CM_FRAC;
ctl |= (div & CM_DIV_FRAC_MASK) ? CM_FRAC : 0;
cprman_write(cprman, data->ctl_reg, ctl);
@@ -1137,6 +1144,12 @@ static int bcm2835_clock_set_rate(struct
@@ -1132,6 +1139,12 @@ static int bcm2835_clock_set_rate(struct
return 0;
}
@ -53,7 +53,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net>
static bool
bcm2835_clk_is_pllc(struct clk_hw *hw)
{
@@ -1320,6 +1333,7 @@ static const struct clk_ops bcm2835_cloc
@@ -1315,6 +1328,7 @@ static const struct clk_ops bcm2835_cloc
.unprepare = bcm2835_clock_off,
.recalc_rate = bcm2835_clock_get_rate,
.set_rate = bcm2835_clock_set_rate,
@ -61,7 +61,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net>
.determine_rate = bcm2835_clock_determine_rate,
.set_parent = bcm2835_clock_set_parent,
.get_parent = bcm2835_clock_get_parent,
@@ -1498,7 +1512,6 @@ static struct clk_hw *bcm2835_register_c
@@ -1493,7 +1507,6 @@ static struct clk_hw *bcm2835_register_c
init.ops = &bcm2835_vpu_clock_clk_ops;
} else {
init.ops = &bcm2835_clock_clk_ops;

2
target/linux/bcm27xx/patches-5.4/950-0218-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch
View File

@ -27,7 +27,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1941,6 +1941,16 @@ reset:
@@ -1962,6 +1962,16 @@ reset:
return ret;
}

2
target/linux/bcm27xx/patches-5.4/950-0267-clk-bcm2835-Avoid-null-pointer-exception.patch
View File

@ -12,7 +12,7 @@ Signed-off-by: popcornmix <popcornmix@gmail.com>
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -2280,9 +2280,11 @@ static bool bcm2835_clk_is_claimed(const
@@ -2275,9 +2275,11 @@ static bool bcm2835_clk_is_claimed(const
int i;
for (i = 0; i < ARRAY_SIZE(clk_desc_array); i++) {

40
target/linux/bcm27xx/patches-5.4/950-0316-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch
View File

@ -1,40 +0,0 @@
From cf658ebc86b3e22c0b77e136fbbf19b580c7c256 Mon Sep 17 00:00:00 2001
From: Stefan Wahren <wahrenst@gmx.net>
Date: Sun, 21 Jul 2019 16:01:36 +0200
Subject: [PATCH] pinctrl: bcm2835: Add support for BCM2711 pull-up
functionality
commit e38a9a437fb93ddafab5030165e4c6a3a5021669 upstream.
The BCM2711 has a new way of selecting the pull-up/pull-down setting
for a GPIO pin. The registers used for the BCM2835, GP_PUD and
GP_PUDCLKn0, are no longer connected. A new set of registers,
GP_GPIO_PUP_PDN_CNTRL_REGx must be used. This commit will add
a new compatible string "brcm,bcm2711-gpio" and the kernel
driver will use it to select which method is used to select
pull-up/pull-down.
This patch based on a patch by Al Cooper which was intended for the
BCM7211. This is a bugfixed and improved version.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Eric Anholt <eric@anholt.net>
---
drivers/pinctrl/bcm/pinctrl-bcm2835.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -1168,6 +1168,12 @@ static int bcm2835_pinctrl_probe(struct
(const struct pinconf_ops *)match->data;
}
+ match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node);
+ if (match) {
+ bcm2835_pinctrl_desc.confops =
+ (const struct pinconf_ops *)match->data;
+ }
+
pc->pctl_dev = devm_pinctrl_register(dev, &bcm2835_pinctrl_desc, pc);
if (IS_ERR(pc->pctl_dev)) {
gpiochip_remove(&pc->gpio_chip);

107
target/linux/bcm27xx/patches-5.4/950-0328-Revert-pinctrl-bcm2835-Pass-irqchip-when-adding-gpio.patch
View File

@ -1,107 +0,0 @@
From b1d33d1e5a44afd2025c5a44a85dc2fab00ec6a7 Mon Sep 17 00:00:00 2001
From: popcornmix <popcornmix@gmail.com>
Date: Tue, 5 Nov 2019 11:28:19 +0000
Subject: [PATCH] Revert "pinctrl: bcm2835: Pass irqchip when adding
gpiochip"
This reverts commit 73345a18d464b1b945b29f54f630ace6873344e2.
---
drivers/pinctrl/bcm/pinctrl-bcm2835.c | 55 +++++++++++++++------------
1 file changed, 30 insertions(+), 25 deletions(-)
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -78,6 +78,7 @@
struct bcm2835_pinctrl {
struct device *dev;
void __iomem *base;
+ int irq[BCM2835_NUM_IRQS];
/* note: locking assumes each bank will have its own unsigned long */
unsigned long enabled_irq_map[BCM2835_NUM_BANKS];
@@ -381,14 +382,14 @@ static void bcm2835_gpio_irq_handler(str
int group;
int i;
- for (i = 0; i < BCM2835_NUM_IRQS; i++) {
- if (chip->irq.parents[i] == irq) {
+ for (i = 0; i < ARRAY_SIZE(pc->irq); i++) {
+ if (pc->irq[i] == irq) {
group = i;
break;
}
}
/* This should not happen, every IRQ has a bank */
- if (i == BCM2835_NUM_IRQS)
+ if (i == ARRAY_SIZE(pc->irq))
BUG();
chained_irq_enter(host_chip, desc);
@@ -1086,7 +1087,6 @@ static int bcm2835_pinctrl_probe(struct
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct bcm2835_pinctrl *pc;
- struct gpio_irq_chip *girq;
struct resource iomem;
int err, i;
const struct of_device_id *match;
@@ -1135,33 +1135,38 @@ static int bcm2835_pinctrl_probe(struct
raw_spin_lock_init(&pc->irq_lock[i]);
}
- girq = &pc->gpio_chip.irq;
- girq->chip = &bcm2835_gpio_irq_chip;
- girq->parent_handler = bcm2835_gpio_irq_handler;
- girq->num_parents = BCM2835_NUM_IRQS;
- girq->parents = devm_kcalloc(dev, BCM2835_NUM_IRQS,
- sizeof(*girq->parents),
- GFP_KERNEL);
- if (!girq->parents)
- return -ENOMEM;
- /*
- * Use the same handler for all groups: this is necessary
- * since we use one gpiochip to cover all lines - the
- * irq handler then needs to figure out which group and
- * bank that was firing the IRQ and look up the per-group
- * and bank data.
- */
- for (i = 0; i < BCM2835_NUM_IRQS; i++)
- girq->parents[i] = irq_of_parse_and_map(np, i);
- girq->default_type = IRQ_TYPE_NONE;
- girq->handler = handle_level_irq;
-
err = gpiochip_add_data(&pc->gpio_chip, pc);
if (err) {
dev_err(dev, "could not add GPIO chip\n");
return err;
}
+ err = gpiochip_irqchip_add(&pc->gpio_chip, &bcm2835_gpio_irq_chip,
+ 0, handle_level_irq, IRQ_TYPE_NONE);
+ if (err) {
+ dev_info(dev, "could not add irqchip\n");
+ return err;
+ }
+
+ for (i = 0; i < BCM2835_NUM_IRQS; i++) {
+ pc->irq[i] = irq_of_parse_and_map(np, i);
+
+ if (pc->irq[i] == 0)
+ continue;
+
+ /*
+ * Use the same handler for all groups: this is necessary
+ * since we use one gpiochip to cover all lines - the
+ * irq handler then needs to figure out which group and
+ * bank that was firing the IRQ and look up the per-group
+ * and bank data.
+ */
+ gpiochip_set_chained_irqchip(&pc->gpio_chip,
+ &bcm2835_gpio_irq_chip,
+ pc->irq[i],
+ bcm2835_gpio_irq_handler);
+ }
+
match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node);
if (match) {
bcm2835_pinctrl_desc.confops =

4
target/linux/bcm27xx/patches-5.4/950-0347-clk-bcm2835-Disable-v3d-clock.patch
View File

@ -12,7 +12,7 @@ Signed-off-by: popcornmix <popcornmix@gmail.com>
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -1734,16 +1734,12 @@ static const struct bcm2835_clk_desc clk
@@ -1729,16 +1729,12 @@ static const struct bcm2835_clk_desc clk
.hold_mask = CM_PLLA_HOLDCORE,
.fixed_divider = 1,
.flags = CLK_SET_RATE_PARENT),
@ -35,7 +35,7 @@ Signed-off-by: popcornmix <popcornmix@gmail.com>
[BCM2835_PLLA_DSI0] = REGISTER_PLL_DIV(
SOC_ALL,
.name = "plla_dsi0",
@@ -2021,14 +2017,12 @@ static const struct bcm2835_clk_desc clk
@@ -2016,14 +2012,12 @@ static const struct bcm2835_clk_desc clk
.int_bits = 6,
.frac_bits = 0,
.tcnt_mux = 3),

8
target/linux/bcm27xx/patches-5.4/950-0361-pinctrl-bcm2835-Remove-gpiochip-on-error.patch
View File

@ -14,12 +14,12 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -1135,7 +1135,7 @@ static int bcm2835_pinctrl_probe(struct
raw_spin_lock_init(&pc->irq_lock[i]);
}
@@ -1315,7 +1315,7 @@ static int bcm2835_pinctrl_probe(struct
girq->default_type = IRQ_TYPE_NONE;
girq->handler = handle_level_irq;
- err = gpiochip_add_data(&pc->gpio_chip, pc);
+ err = devm_gpiochip_add_data(dev, &pc->gpio_chip, pc);
if (err) {
dev_err(dev, "could not add GPIO chip\n");
return err;
goto out_remove;

88
target/linux/bcm27xx/patches-5.4/950-0362-pinctrl-bcm2835-Change-init-order-for-gpio-hogs.patch
View File

@ -1,88 +0,0 @@
From 27cb8bf0442f677380a1df93b93b7589b7ce5243 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Mon, 6 Jan 2020 14:05:42 +0000
Subject: [PATCH] pinctrl: bcm2835: Change init order for gpio hogs
pinctrl-bcm2835 is a combined pinctrl/gpio driver. Currently the gpio
side is registered first, but this breaks gpio hogs (which are
configured during gpiochip_add_data). Part of the hog initialisation
is a call to pinctrl_gpio_request, and since the pinctrl driver hasn't
yet been registered this results in an -EPROBE_DEFER from which it can
never recover.
Change the initialisation sequence to register the pinctrl driver
first.
See: https://www.raspberrypi.org/forums/viewtopic.php?f=107&t=260600
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
---
drivers/pinctrl/bcm/pinctrl-bcm2835.c | 40 ++++++++++++---------------
1 file changed, 17 insertions(+), 23 deletions(-)
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -1135,9 +1135,25 @@ static int bcm2835_pinctrl_probe(struct
raw_spin_lock_init(&pc->irq_lock[i]);
}
+ match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node);
+ if (match) {
+ bcm2835_pinctrl_desc.confops =
+ (const struct pinconf_ops *)match->data;
+ }
+
+ pc->pctl_dev = devm_pinctrl_register(dev, &bcm2835_pinctrl_desc, pc);
+ if (IS_ERR(pc->pctl_dev))
+ return PTR_ERR(pc->pctl_dev);
+
+ pc->gpio_range = bcm2835_pinctrl_gpio_range;
+ pc->gpio_range.base = pc->gpio_chip.base;
+ pc->gpio_range.gc = &pc->gpio_chip;
+ pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);
+
err = devm_gpiochip_add_data(dev, &pc->gpio_chip, pc);
if (err) {
dev_err(dev, "could not add GPIO chip\n");
+ pinctrl_remove_gpio_range(pc->pctl_dev, &pc->gpio_range);
return err;
}
@@ -1145,6 +1161,7 @@ static int bcm2835_pinctrl_probe(struct
0, handle_level_irq, IRQ_TYPE_NONE);
if (err) {
dev_info(dev, "could not add irqchip\n");
+ pinctrl_remove_gpio_range(pc->pctl_dev, &pc->gpio_range);
return err;
}
@@ -1167,29 +1184,6 @@ static int bcm2835_pinctrl_probe(struct
bcm2835_gpio_irq_handler);
}
- match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node);
- if (match) {
- bcm2835_pinctrl_desc.confops =
- (const struct pinconf_ops *)match->data;
- }
-
- match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node);
- if (match) {
- bcm2835_pinctrl_desc.confops =
- (const struct pinconf_ops *)match->data;
- }
-
- pc->pctl_dev = devm_pinctrl_register(dev, &bcm2835_pinctrl_desc, pc);
- if (IS_ERR(pc->pctl_dev)) {
- gpiochip_remove(&pc->gpio_chip);
- return PTR_ERR(pc->pctl_dev);
- }
-
- pc->gpio_range = bcm2835_pinctrl_gpio_range;
- pc->gpio_range.base = pc->gpio_chip.base;
- pc->gpio_range.gc = &pc->gpio_chip;
- pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);
-
return 0;
}

2
target/linux/bcm27xx/patches-5.4/950-0364-ARM-dts-bcm283x-Remove-simple-bus-from-fixed-clocks.patch
View File

@ -24,7 +24,7 @@ Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -635,22 +635,16 @@
@@ -636,22 +636,16 @@
};
clocks {

4
target/linux/bcm27xx/patches-5.4/950-0366-ARM-dts-bcm283x-Move-pixelvalve-to-bcm2835-common.dt.patch
View File

@ -78,7 +78,7 @@ Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
arm-pmu {
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -432,18 +432,6 @@
@@ -433,18 +433,6 @@
status = "disabled";
};
@ -97,7 +97,7 @@ Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
dpi: dpi@7e208000 {
compatible = "brcm,bcm2835-dpi";
reg = <0x7e208000 0x8c>;
@@ -608,12 +596,6 @@
@@ -609,12 +597,6 @@
status = "disabled";
};

2
target/linux/bcm27xx/patches-5.4/950-0389-Initialise-rpi-firmware-before-clk-bcm2835.patch
View File

@ -25,7 +25,7 @@ Co-authored-by: Phil Elwell <phil@raspberrypi.org>
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -2401,7 +2401,7 @@ static int __init __bcm2835_clk_driver_i
@@ -2396,7 +2396,7 @@ static int __init __bcm2835_clk_driver_i
{
return platform_driver_register(&bcm2835_clk_driver);
}

2
target/linux/bcm27xx/patches-5.4/950-0392-tty-amba-pl011-Add-un-throttle-support.patch
View File

@ -50,7 +50,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
static void pl011_stop_rx(struct uart_port *port)
{
struct uart_amba_port *uap =
@@ -2167,6 +2193,8 @@ static const struct uart_ops amba_pl011_
@@ -2150,6 +2176,8 @@ static const struct uart_ops amba_pl011_
.stop_tx = pl011_stop_tx,
.start_tx = pl011_start_tx,
.stop_rx = pl011_stop_rx,

18
target/linux/bcm27xx/patches-5.4/950-0411-ARM-dts-Revert-all-changes-to-upstream-dts-files.patch
View File

@ -1771,7 +1771,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
compatible = "brcm,bcm2835-rng";
reg = <0x7e104000 0x10>;
interrupts = <2 29>;
@@ -269,35 +212,6 @@
@@ -270,35 +213,6 @@
brcm,function = <BCM2835_FSEL_ALT2>;
};
@ -1807,7 +1807,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
sdhost_gpio48: sdhost_gpio48 {
brcm,pins = <48 49 50 51 52 53>;
brcm,function = <BCM2835_FSEL_ALT0>;
@@ -379,7 +293,7 @@
@@ -380,7 +294,7 @@
};
uart0: serial@7e201000 {
@ -1816,7 +1816,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
reg = <0x7e201000 0x200>;
interrupts = <2 25>;
clocks = <&clocks BCM2835_CLOCK_UART>,
@@ -393,8 +307,6 @@
@@ -394,8 +308,6 @@
reg = <0x7e202000 0x100>;
interrupts = <2 24>;
clocks = <&clocks BCM2835_CLOCK_VPU>;
@ -1825,7 +1825,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
status = "disabled";
};
@@ -402,10 +314,6 @@
@@ -403,10 +315,6 @@
compatible = "brcm,bcm2835-i2s";
reg = <0x7e203000 0x24>;
clocks = <&clocks BCM2835_CLOCK_PCM>;
@ -1836,7 +1836,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
status = "disabled";
};
@@ -414,8 +322,6 @@
@@ -415,8 +323,6 @@
reg = <0x7e204000 0x200>;
interrupts = <2 22>;
clocks = <&clocks BCM2835_CLOCK_VPU>;
@ -1845,7 +1845,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -541,32 +447,6 @@
@@ -542,32 +448,6 @@
status = "disabled";
};
@ -1878,7 +1878,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
i2c1: i2c@7e804000 {
compatible = "brcm,bcm2835-i2c";
reg = <0x7e804000 0x1000>;
@@ -577,16 +457,6 @@
@@ -578,16 +458,6 @@
status = "disabled";
};
@ -1895,7 +1895,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
vec: vec@7e806000 {
compatible = "brcm,bcm2835-vec";
reg = <0x7e806000 0x1000>;
@@ -595,20 +465,6 @@
@@ -596,20 +466,6 @@
status = "disabled";
};
@ -1916,7 +1916,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
usb: usb@7e980000 {
compatible = "brcm,bcm2835-usb";
reg = <0x7e980000 0x10000>;
@@ -620,10 +476,6 @@
@@ -621,10 +477,6 @@
phys = <&usbphy>;
phy-names = "usb2-phy";
};

2
target/linux/bcm27xx/patches-5.4/950-0441-PCI-of-Add-inbound-resource-parsing-to-helpers.patch
View File

@ -82,7 +82,7 @@ Cc: linux-rockchip@lists.infradead.org
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -1523,7 +1523,8 @@ static int advk_pcie_probe(struct platfo
@@ -1525,7 +1525,8 @@ static int advk_pcie_probe(struct platfo
return ret;
}

4
target/linux/bcm27xx/patches-5.4/950-0658-dt-Implement-an-I2C-pinctrl-mux-for-BSC0.patch
View File

@ -392,7 +392,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
+};
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -340,7 +340,7 @@
@@ -341,7 +341,7 @@
status = "disabled";
};
@ -401,7 +401,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
compatible = "brcm,bcm2835-i2c";
reg = <0x7e205000 0x200>;
interrupts = <2 21>;
@@ -350,6 +350,30 @@
@@ -351,6 +351,30 @@
status = "disabled";
};

10
target/linux/bcm27xx/patches-5.4/950-0803-media-rcar-csi2-Negotiate-data-lanes-number.patch
View File

@ -44,7 +44,7 @@ Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
if ((rcsi2_read(priv, PHCLM_REG) & PHCLM_STOPSTATECKL) &&
(rcsi2_read(priv, PHDLM_REG) & lane_mask) == lane_mask)
@@ -445,7 +447,8 @@ static int rcsi2_set_phypll(struct rcar_
@@ -452,7 +454,8 @@ static int rcsi2_set_phypll(struct rcar_
return 0;
}
@ -54,7 +54,7 @@ Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
{
struct v4l2_subdev *source;
struct v4l2_ctrl *ctrl;
@@ -470,15 +473,63 @@ static int rcsi2_calc_mbps(struct rcar_c
@@ -477,15 +480,63 @@ static int rcsi2_calc_mbps(struct rcar_c
* bps = link_freq * 2
*/
mbps = v4l2_ctrl_g_ctrl_int64(ctrl) * bpp;
@ -119,7 +119,7 @@ Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
unsigned int i;
int mbps, ret;
@@ -522,10 +573,18 @@ static int rcsi2_start_receiver(struct r
@@ -529,10 +580,18 @@ static int rcsi2_start_receiver(struct r
fld |= FLD_FLD_NUM(1);
}
@ -140,7 +140,7 @@ Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
if (mbps < 0)
return mbps;
@@ -572,7 +631,7 @@ static int rcsi2_start_receiver(struct r
@@ -579,7 +638,7 @@ static int rcsi2_start_receiver(struct r
rcsi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ);
rcsi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ | PHYCNT_RSTZ);
@ -149,7 +149,7 @@ Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
if (ret)
return ret;
@@ -749,6 +808,7 @@ static int rcsi2_notify_bound(struct v4l
@@ -756,6 +815,7 @@ static int rcsi2_notify_bound(struct v4l
}
priv->remote = subdev;

2
target/linux/bcm27xx/patches-5.4/950-0877-Bluetooth-hci_bcm-Add-compatible-string-for-BCM43540.patch
View File

@ -18,7 +18,7 @@ Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -1427,6 +1427,7 @@ static const struct of_device_id bcm_blu
@@ -1432,6 +1432,7 @@ static const struct of_device_id bcm_blu
{ .compatible = "brcm,bcm4345c5" },
{ .compatible = "brcm,bcm4330-bt" },
{ .compatible = "brcm,bcm43438-bt" },

2
target/linux/bcm27xx/patches-5.4/950-0878-Bluetooth-btbcm-Add-entry-for-BCM4335A0-UART-bluetoo.patch
View File

@ -48,7 +48,7 @@ Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -1428,6 +1428,7 @@ static const struct of_device_id bcm_blu
@@ -1433,6 +1433,7 @@ static const struct of_device_id bcm_blu
{ .compatible = "brcm,bcm4330-bt" },
{ .compatible = "brcm,bcm43438-bt" },
{ .compatible = "brcm,bcm43540-bt" },

6
target/linux/bcm27xx/patches-5.4/950-0879-Bluetooth-hci_bcm-Disallow-set_baudrate-for-BCM4354.patch
View File

@ -76,7 +76,7 @@ Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
else if (hu->proto->oper_speed)
speed = hu->proto->oper_speed;
else
@@ -1377,6 +1395,7 @@ static struct platform_driver bcm_driver
@@ -1382,6 +1400,7 @@ static struct platform_driver bcm_driver
static int bcm_serdev_probe(struct serdev_device *serdev)
{
struct bcm_device *bcmdev;
@ -84,7 +84,7 @@ Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
int err;
bcmdev = devm_kzalloc(&serdev->dev, sizeof(*bcmdev), GFP_KERNEL);
@@ -1411,6 +1430,10 @@ static int bcm_serdev_probe(struct serde
@@ -1416,6 +1435,10 @@ static int bcm_serdev_probe(struct serde
if (err)
dev_err(&serdev->dev, "Failed to power down\n");
@ -95,7 +95,7 @@ Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
return hci_uart_register_device(&bcmdev->serdev_hu, &bcm_proto);
}
@@ -1422,12 +1445,16 @@ static void bcm_serdev_remove(struct ser
@@ -1427,12 +1450,16 @@ static void bcm_serdev_remove(struct ser
}
#ifdef CONFIG_OF

8
target/linux/bcm27xx/patches-5.4/950-0881-Bluetooth-hci_bcm-Support-pcm-params-in-dts.patch
View File

@ -52,9 +52,9 @@ Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
return 0;
}
@@ -1149,6 +1162,9 @@ static int bcm_probe(struct platform_dev
dev->dev = &pdev->dev;
dev->irq = platform_get_irq(pdev, 0);
@@ -1154,6 +1167,9 @@ static int bcm_probe(struct platform_dev
dev->irq = ret;
+ /* Initialize routing field to an unused value */
+ dev->pcm_int_params[0] = 0xff;
@ -62,7 +62,7 @@ Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
if (has_acpi_companion(&pdev->dev)) {
ret = bcm_acpi_probe(dev);
if (ret)
@@ -1409,6 +1425,9 @@ static int bcm_serdev_probe(struct serde
@@ -1414,6 +1430,9 @@ static int bcm_serdev_probe(struct serde
bcmdev->serdev_hu.serdev = serdev;
serdev_device_set_drvdata(serdev, bcmdev);

4
target/linux/bcm27xx/patches-5.4/950-0882-Bluetooth-hci_bcm-Drive-RTS-only-for-BCM43438.patch
View File

@ -61,7 +61,7 @@ Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
if (err)
goto err_unset_hu;
}
@@ -1450,8 +1457,10 @@ static int bcm_serdev_probe(struct serde
@@ -1455,8 +1462,10 @@ static int bcm_serdev_probe(struct serde
dev_err(&serdev->dev, "Failed to power down\n");
data = device_get_match_data(bcmdev->dev);
@ -73,7 +73,7 @@ Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
return hci_uart_register_device(&bcmdev->serdev_hu, &bcm_proto);
}
@@ -1468,11 +1477,15 @@ static struct bcm_device_data bcm4354_de
@@ -1473,11 +1482,15 @@ static struct bcm_device_data bcm4354_de
.no_early_set_baudrate = true,
};

2
target/linux/bcm27xx/patches-5.4/950-0973-net-bcmgenet-Reset-RBUF-on-first-open.patch
View File

@ -59,7 +59,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
/* Reinitialize TDMA and RDMA and SW housekeeping */
ret = bcmgenet_init_dma(priv);
@@ -3665,7 +3673,7 @@ static int bcmgenet_resume(struct device
@@ -3667,7 +3675,7 @@ static int bcmgenet_resume(struct device
bcmgenet_power_up(priv, GENET_POWER_WOL_MAGIC);
/* Disable RX/TX DMA and flush TX queues */

2
target/linux/bcm27xx/patches-5.4/950-1010-phy-broadcom-split-out-the-BCM54213PE-from-the-BCM54.patch
View File

@ -49,7 +49,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
.phy_id = PHY_ID_BCM5461,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM5461",
@@ -753,7 +762,8 @@ module_phy_driver(broadcom_drivers);
@@ -754,7 +763,8 @@ module_phy_driver(broadcom_drivers);
static struct mdio_device_id __maybe_unused broadcom_tbl[] = {
{ PHY_ID_BCM5411, 0xfffffff0 },
{ PHY_ID_BCM5421, 0xfffffff0 },

4
target/linux/bcm63xx/patches-5.4/339-MIPS-BCM63XX-add-support-for-BCM63268.patch
View File

@ -107,7 +107,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
}
static struct clk clk_pcie = {
@@ -542,6 +556,21 @@ static struct clk_lookup bcm6368_clks[]
@@ -548,6 +562,21 @@ static struct clk_lookup bcm6368_clks[]
CLKDEV_INIT(NULL, "ipsec", &clk_ipsec),
};
@ -129,7 +129,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
#define HSSPI_PLL_HZ_6328 133333333
#define HSSPI_PLL_HZ_6362 400000000
@@ -574,6 +603,10 @@ static int __init bcm63xx_clk_init(void)
@@ -580,6 +609,10 @@ static int __init bcm63xx_clk_init(void)
case BCM6368_CPU_ID:
clkdev_add_table(bcm6368_clks, ARRAY_SIZE(bcm6368_clks));
break;

6
target/linux/bcm63xx/patches-5.4/341-MIPS-BCM63XX-add-support-for-BCM6318.patch
View File

@ -57,7 +57,7 @@ Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318
mask = CKCTL_6328_HSSPI_EN;
else if (BCMCPU_IS_6362())
mask = CKCTL_6362_HSSPI_EN;
@@ -450,6 +452,19 @@ static struct clk_lookup bcm3368_clks[]
@@ -456,6 +458,19 @@ static struct clk_lookup bcm3368_clks[]
CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1),
};
@ -77,7 +77,7 @@ Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318
static struct clk_lookup bcm6328_clks[] = {
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
@@ -571,6 +586,7 @@ static struct clk_lookup bcm63268_clks[]
@@ -577,6 +592,7 @@ static struct clk_lookup bcm63268_clks[]
CLKDEV_INIT(NULL, "pcie", &clk_pcie),
};
@ -85,7 +85,7 @@ Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318
#define HSSPI_PLL_HZ_6328 133333333
#define HSSPI_PLL_HZ_6362 400000000
@@ -580,6 +596,10 @@ static int __init bcm63xx_clk_init(void)
@@ -586,6 +602,10 @@ static int __init bcm63xx_clk_init(void)
case BCM3368_CPU_ID:
clkdev_add_table(bcm3368_clks, ARRAY_SIZE(bcm3368_clks));
break;

20
target/linux/bcm63xx/patches-5.4/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch
View File

@ -9,7 +9,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@@ -495,6 +495,8 @@ static struct clk_lookup bcm3368_clks[]
@@ -501,6 +501,8 @@ static struct clk_lookup bcm3368_clks[]
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
@ -18,7 +18,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree
/* gated clocks */
CLKDEV_INIT(NULL, "enet0", &clk_enet0),
CLKDEV_INIT(NULL, "enet1", &clk_enet1),
@@ -511,7 +513,9 @@ static struct clk_lookup bcm6318_clks[]
@@ -517,7 +519,9 @@ static struct clk_lookup bcm6318_clks[]
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
@ -28,7 +28,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree
/* gated clocks */
CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
@@ -525,7 +529,10 @@ static struct clk_lookup bcm6328_clks[]
@@ -531,7 +535,10 @@ static struct clk_lookup bcm6328_clks[]
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
@ -39,7 +39,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree
/* gated clocks */
CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
@@ -538,6 +545,7 @@ static struct clk_lookup bcm6338_clks[]
@@ -544,6 +551,7 @@ static struct clk_lookup bcm6338_clks[]
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
@ -47,7 +47,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree
/* gated clocks */
CLKDEV_INIT(NULL, "enet0", &clk_enet0),
CLKDEV_INIT(NULL, "enet1", &clk_enet1),
@@ -552,6 +560,7 @@ static struct clk_lookup bcm6345_clks[]
@@ -558,6 +566,7 @@ static struct clk_lookup bcm6345_clks[]
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
@ -55,7 +55,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree
/* gated clocks */
CLKDEV_INIT(NULL, "enet0", &clk_enet0),
CLKDEV_INIT(NULL, "enet1", &clk_enet1),
@@ -566,6 +575,7 @@ static struct clk_lookup bcm6348_clks[]
@@ -572,6 +581,7 @@ static struct clk_lookup bcm6348_clks[]
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
@ -63,7 +63,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree
/* gated clocks */
CLKDEV_INIT(NULL, "enet0", &clk_enet0),
CLKDEV_INIT(NULL, "enet1", &clk_enet1),
@@ -582,6 +592,8 @@ static struct clk_lookup bcm6358_clks[]
@@ -588,6 +598,8 @@ static struct clk_lookup bcm6358_clks[]
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
@ -72,7 +72,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree
/* gated clocks */
CLKDEV_INIT(NULL, "enet0", &clk_enet0),
CLKDEV_INIT(NULL, "enet1", &clk_enet1),
@@ -601,7 +613,10 @@ static struct clk_lookup bcm6362_clks[]
@@ -607,7 +619,10 @@ static struct clk_lookup bcm6362_clks[]
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
@ -83,7 +83,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree
/* gated clocks */
CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
@@ -617,6 +632,8 @@ static struct clk_lookup bcm6368_clks[]
@@ -623,6 +638,8 @@ static struct clk_lookup bcm6368_clks[]
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
@ -92,7 +92,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree
/* gated clocks */
CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
@@ -631,7 +648,10 @@ static struct clk_lookup bcm63268_clks[]
@@ -637,7 +654,10 @@ static struct clk_lookup bcm63268_clks[]
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),

6
target/linux/bcm63xx/patches-5.4/430-MIPS-BCM63XX-add-nand-clocks.patch
View File

@ -24,7 +24,7 @@
* Internal peripheral clock
*/
static struct clk clk_periph = {
@@ -618,6 +635,7 @@ static struct clk_lookup bcm6362_clks[]
@@ -624,6 +641,7 @@ static struct clk_lookup bcm6362_clks[]
CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll),
/* gated clocks */
@ -32,7 +32,7 @@
CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
CLKDEV_INIT(NULL, "usbd", &clk_usbd),
@@ -635,6 +653,7 @@ static struct clk_lookup bcm6368_clks[]
@@ -641,6 +659,7 @@ static struct clk_lookup bcm6368_clks[]
CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
CLKDEV_INIT("10000120.serial", "refclk", &clk_periph),
/* gated clocks */
@ -40,7 +40,7 @@
CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
CLKDEV_INIT(NULL, "usbd", &clk_usbd),
@@ -653,6 +672,7 @@ static struct clk_lookup bcm63268_clks[]
@@ -659,6 +678,7 @@ static struct clk_lookup bcm63268_clks[]
CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll),
/* gated clocks */

14
target/linux/generic/backport-5.4/716-v5.5-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch
View File

@ -16,7 +16,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -565,26 +565,17 @@ static const struct sfp_upstream_ops sfp
@@ -565,31 +565,17 @@ static const struct sfp_upstream_ops sfp
static int phylink_register_sfp(struct phylink *pl,
struct fwnode_handle *fwnode)
{
@ -42,6 +42,11 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
return ret;
}
- if (!fwnode_device_is_available(ref.fwnode)) {
- fwnode_handle_put(ref.fwnode);
- return 0;
- }
-
- pl->sfp_bus = sfp_register_upstream(ref.fwnode, pl, &sfp_phylink_ops);
- if (!pl->sfp_bus)
- return -ENOMEM;
@ -59,7 +64,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
#include <linux/rtnetlink.h>
#include <linux/slab.h>
@@ -520,45 +521,63 @@ static void sfp_upstream_clear(struct sf
@@ -520,45 +521,68 @@ static void sfp_upstream_clear(struct sf
}
/**
@ -117,6 +122,11 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+ else if (ret < 0)
+ return ERR_PTR(ret);
+
+ if (!fwnode_device_is_available(ref.fwnode)) {
+ fwnode_handle_put(ref.fwnode);
+ return NULL;
+ }
+
+ bus = sfp_bus_get(ref.fwnode);
+ fwnode_handle_put(ref.fwnode);
+ if (!bus)

4
target/linux/generic/backport-5.4/717-v5.5-net-sfp-rework-upstream-interface.patch
View File

@ -117,7 +117,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
{
struct fwnode_reference_args ref;
struct sfp_bus *bus;
@@ -557,7 +563,39 @@ struct sfp_bus *sfp_register_upstream_no
@@ -562,7 +568,39 @@ struct sfp_bus *sfp_register_upstream_no
if (!bus)
return ERR_PTR(-ENOMEM);
@ -157,7 +157,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
bus->upstream_ops = ops;
bus->upstream = upstream;
@@ -570,33 +608,33 @@ struct sfp_bus *sfp_register_upstream_no
@@ -575,33 +613,33 @@ struct sfp_bus *sfp_register_upstream_no
}
rtnl_unlock();

6
target/linux/generic/hack-5.4/902-debloat_proc.patch
View File

@ -286,7 +286,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
goto err;
--- a/net/core/net-procfs.c
+++ b/net/core/net-procfs.c
@@ -279,10 +279,12 @@ static int __net_init dev_proc_net_init(
@@ -309,10 +309,12 @@ static int __net_init dev_proc_net_init(
if (!proc_create_net("dev", 0444, net->proc_net, &dev_seq_ops,
sizeof(struct seq_net_private)))
goto out;
@ -301,7 +301,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
sizeof(struct seq_net_private)))
goto out_softnet;
@@ -292,9 +294,11 @@ static int __net_init dev_proc_net_init(
@@ -322,9 +324,11 @@ static int __net_init dev_proc_net_init(
out:
return rc;
out_ptype:
@ -315,7 +315,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
out_dev:
remove_proc_entry("dev", net->proc_net);
goto out;
@@ -304,8 +308,10 @@ static void __net_exit dev_proc_net_exit
@@ -334,8 +338,10 @@ static void __net_exit dev_proc_net_exit
{
wext_proc_exit(net);

2
target/linux/generic/pending-5.4/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch
View File

@ -71,7 +71,7 @@ Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -6884,7 +6884,7 @@ static void __ref alloc_node_mem_map(str
@@ -6886,7 +6886,7 @@ static void __ref alloc_node_mem_map(str
mem_map = NODE_DATA(0)->node_mem_map;
#if defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP) || defined(CONFIG_FLATMEM)
if (page_to_pfn(mem_map) != pgdat->node_start_pfn)

16
target/linux/generic/pending-5.4/630-packet_socket_type.patch
View File

@ -30,7 +30,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
#define PACKET_FANOUT_LB 1
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1797,6 +1797,7 @@ static int packet_rcv_spkt(struct sk_buf
@@ -1801,6 +1801,7 @@ static int packet_rcv_spkt(struct sk_buf
{
struct sock *sk;
struct sockaddr_pkt *spkt;
@ -38,7 +38,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
/*
* When we registered the protocol we saved the socket in the data
@@ -1804,6 +1805,7 @@ static int packet_rcv_spkt(struct sk_buf
@@ -1808,6 +1809,7 @@ static int packet_rcv_spkt(struct sk_buf
*/
sk = pt->af_packet_priv;
@ -46,7 +46,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
/*
* Yank back the headers [hope the device set this
@@ -1816,7 +1818,7 @@ static int packet_rcv_spkt(struct sk_buf
@@ -1820,7 +1822,7 @@ static int packet_rcv_spkt(struct sk_buf
* so that this procedure is noop.
*/
@ -55,7 +55,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
goto out;
if (!net_eq(dev_net(dev), sock_net(sk)))
@@ -2054,12 +2056,12 @@ static int packet_rcv(struct sk_buff *sk
@@ -2058,12 +2060,12 @@ static int packet_rcv(struct sk_buff *sk
unsigned int snaplen, res;
bool is_drop_n_account = false;
@ -71,7 +71,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
if (!net_eq(dev_net(dev), sock_net(sk)))
goto drop;
@@ -2185,12 +2187,12 @@ static int tpacket_rcv(struct sk_buff *s
@@ -2189,12 +2191,12 @@ static int tpacket_rcv(struct sk_buff *s
BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h2)) != 32);
BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h3)) != 48);
@ -87,7 +87,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
if (!net_eq(dev_net(dev), sock_net(sk)))
goto drop;
@@ -3289,6 +3291,7 @@ static int packet_create(struct net *net
@@ -3293,6 +3295,7 @@ static int packet_create(struct net *net
mutex_init(&po->pg_vec_lock);
po->rollover = NULL;
po->prot_hook.func = packet_rcv;
@ -95,7 +95,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
if (sock->type == SOCK_PACKET)
po->prot_hook.func = packet_rcv_spkt;
@@ -3924,6 +3927,16 @@ packet_setsockopt(struct socket *sock, i
@@ -3930,6 +3933,16 @@ packet_setsockopt(struct socket *sock, i
po->xmit = val ? packet_direct_xmit : dev_queue_xmit;
return 0;
}
@ -112,7 +112,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
default:
return -ENOPROTOOPT;
}
@@ -3980,6 +3993,13 @@ static int packet_getsockopt(struct sock
@@ -3986,6 +3999,13 @@ static int packet_getsockopt(struct sock
case PACKET_VNET_HDR:
val = po->has_vnet_hdr;
break;

2
target/linux/generic/pending-5.4/644-net-pppoe-support-hardware-flow-table-offload.patch
View File

@ -21,7 +21,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
#define PPP_VERSION "2.4.2"
/*
@@ -1373,12 +1378,37 @@ static void ppp_dev_priv_destructor(stru
@@ -1378,12 +1383,37 @@ static void ppp_dev_priv_destructor(stru
ppp_destroy_interface(ppp);
}

2
target/linux/generic/pending-5.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
View File

@ -53,7 +53,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -141,6 +141,10 @@ const struct fib_prop fib_props[RTN_MAX
@@ -142,6 +142,10 @@ const struct fib_prop fib_props[RTN_MAX
.error = -EINVAL,
.scope = RT_SCOPE_NOWHERE,
},

2
target/linux/generic/pending-5.4/743-net-sfp-add-module-start-stop-upstream-notifications.patch
View File

@ -32,7 +32,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
@@ -712,6 +712,27 @@ void sfp_module_remove(struct sfp_bus *b
@@ -717,6 +717,27 @@ void sfp_module_remove(struct sfp_bus *b
}
EXPORT_SYMBOL_GPL(sfp_module_remove);

2
target/linux/ipq40xx/patches-5.4/302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch
View File

@ -22,7 +22,7 @@ Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -599,6 +599,41 @@ not_relocated: mov r0, #0
@@ -600,6 +600,41 @@ not_relocated: mov r0, #0
bic r4, r4, #1
blne cache_on

2
target/linux/layerscape/patches-5.4/302-dts-0060-arm64-dts-ls1028a-add-flexspi-nodes.patch
View File

@ -18,7 +18,7 @@ Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -222,6 +222,21 @@
@@ -226,6 +226,21 @@
phy-connection-type = "rgmii-id";
};

2
target/linux/layerscape/patches-5.4/302-dts-0073-arm64-ls1028aqds-Add-support-DP-nodes-for-LS1028AQDS.patch
View File

@ -13,7 +13,7 @@ Signed-off-by: Wen He <wen.he_1@nxp.com>
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -244,3 +244,15 @@
@@ -248,3 +248,15 @@
&sata {
status = "okay";
};

42
target/linux/layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch
View File

@ -1,42 +0,0 @@
From d4c7270a63b1d78b89d91f74d782cce2a2bd9690 Mon Sep 17 00:00:00 2001
From: Biwen Li <biwen.li@nxp.com>
Date: Wed, 4 Sep 2019 11:39:30 +0800
Subject: [PATCH] arm64: ls1028a-qds: correct bus of rtc
The rtc is on i2c2 bus(hardware), not on i2c1 channel 3,
so correct it
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -169,11 +169,6 @@
vcc-supply = <&sb_3v3>;
};
- rtc@51 {
- compatible = "nxp,pcf2129";
- reg = <0x51>;
- };
-
eeprom@56 {
compatible = "atmel,24c512";
reg = <0x56>;
@@ -217,6 +212,14 @@
};
+&i2c1 {
+ status = "okay";
+ rtc@51 {
+ compatible = "nxp,pcf2129";
+ reg = <0x51>;
+ };
+};
+
&enetc_port1 {
phy-handle = <&qds_phy1>;
phy-connection-type = "rgmii-id";

2
target/linux/layerscape/patches-5.4/302-dts-0084-arm64-dts-ls1028a-define-networking-options-for-QDS.patch
View File

@ -346,7 +346,7 @@ Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
};
};
@@ -259,3 +283,6 @@
@@ -260,3 +284,6 @@
edp_num_lanes = <0x4>;
status = "okay";
};

2
target/linux/layerscape/patches-5.4/302-dts-0092-arm64-dts-ls1028a-Add-DP-DT-nodes.patch
View File

@ -14,7 +14,7 @@ Signed-off-by: Wen He <wen.he_1@nxp.com>
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -273,14 +273,7 @@
@@ -274,14 +274,7 @@
};
&hdptx0 {

2
target/linux/layerscape/patches-5.4/302-dts-0113-arm64-dts-fsl-ls1028a-qds-Add-overlays-for-various-s.patch
View File

@ -884,7 +884,7 @@ Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
-};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -276,6 +276,3 @@
@@ -277,6 +277,3 @@
lane-mapping = <0x4e>;
status = "okay";
};

4
target/linux/layerscape/patches-5.4/303-core-0003-cgroup-let-a-symlink-too-be-created-with-a-cftype-fi.patch
View File

@ -87,7 +87,7 @@ Signed-off-by: Li Yang <leoyang.li@nxp.com>
}
/**
@@ -3896,6 +3912,7 @@ static int cgroup_add_file(struct cgroup
@@ -3901,6 +3917,7 @@ static int cgroup_add_file(struct cgroup
{
char name[CGROUP_FILE_NAME_MAX];
struct kernfs_node *kn;
@ -95,7 +95,7 @@ Signed-off-by: Li Yang <leoyang.li@nxp.com>
struct lock_class_key *key = NULL;
int ret;
@@ -3926,6 +3943,14 @@ static int cgroup_add_file(struct cgroup
@@ -3931,6 +3948,14 @@ static int cgroup_add_file(struct cgroup
spin_unlock_irq(&cgroup_file_kn_lock);
}

4
target/linux/layerscape/patches-5.4/303-core-0004-cgroup-bfq-revert-bfq.weight-symlink-change.patch
View File

@ -89,7 +89,7 @@ Signed-off-by: Li Yang <leoyang.li@nxp.com>
}
/**
@@ -3912,7 +3896,6 @@ static int cgroup_add_file(struct cgroup
@@ -3917,7 +3901,6 @@ static int cgroup_add_file(struct cgroup
{
char name[CGROUP_FILE_NAME_MAX];
struct kernfs_node *kn;
@ -97,7 +97,7 @@ Signed-off-by: Li Yang <leoyang.li@nxp.com>
struct lock_class_key *key = NULL;
int ret;
@@ -3943,14 +3926,6 @@ static int cgroup_add_file(struct cgroup
@@ -3948,14 +3931,6 @@ static int cgroup_add_file(struct cgroup
spin_unlock_irq(&cgroup_file_kn_lock);
}

4
target/linux/layerscape/patches-5.4/801-audio-0008-Revert-ASoC-Remove-dev_err-usage-after-platform_get_.patch
View File

@ -439,7 +439,7 @@ This reverts commit cf9441adb1a35506d7606866c382b9d8614169b5.
IRQF_SHARED, dev_name(dev), pdev);
--- a/sound/soc/xilinx/xlnx_formatter_pcm.c
+++ b/sound/soc/xilinx/xlnx_formatter_pcm.c
@@ -613,6 +613,7 @@ static int xlnx_formatter_pcm_probe(stru
@@ -634,6 +634,7 @@ static int xlnx_formatter_pcm_probe(stru
aud_drv_data->mm2s_irq = platform_get_irq_byname(pdev,
"irq_mm2s");
if (aud_drv_data->mm2s_irq < 0) {
@ -447,7 +447,7 @@ This reverts commit cf9441adb1a35506d7606866c382b9d8614169b5.
ret = aud_drv_data->mm2s_irq;
goto clk_err;
}
@@ -639,6 +640,7 @@ static int xlnx_formatter_pcm_probe(stru
@@ -660,6 +661,7 @@ static int xlnx_formatter_pcm_probe(stru
aud_drv_data->s2mm_irq = platform_get_irq_byname(pdev,
"irq_s2mm");
if (aud_drv_data->s2mm_irq < 0) {

2
target/linux/layerscape/patches-5.4/820-usb-0014-MLK-17380-3-usb-move-EH-SINGLE_STEP_SET_FEATURE-impl.patch
View File

@ -20,7 +20,7 @@ Signed-off-by: Peter Chen <peter.chen@nxp.com>
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2104,6 +2104,140 @@ int usb_hcd_get_frame_number (struct usb
@@ -2125,6 +2125,140 @@ int usb_hcd_get_frame_number (struct usb
}
/*-------------------------------------------------------------------------*/

2
target/linux/layerscape/patches-5.4/820-usb-0019-MLK-9829-usb-core-print-suggested-message-if-failed-.patch
View File

@ -20,7 +20,7 @@ Signed-off-by: Li Jun <jun.li@freescale.com>
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -4777,7 +4777,8 @@ hub_port_init(struct usb_hub *hub, struc
@@ -4780,7 +4780,8 @@ hub_port_init(struct usb_hub *hub, struc
}
if (r) {
if (r != -ENODEV)

2
target/linux/mediatek/patches-5.4/0600-net-phylink-propagate-resolved-link-config-via-mac_l.patch
View File

@ -141,7 +141,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -1499,9 +1499,10 @@ static void axienet_mac_link_down(struct
@@ -1501,9 +1501,10 @@ static void axienet_mac_link_down(struct
}
static void axienet_mac_link_up(struct phylink_config *config,

4
target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch
View File

@ -76,7 +76,7 @@ Cc: Miquèl Raynal <miquel.raynal@bootlin.com>
/* Set to Direct mode */
reg = advk_readl(pcie, CTRL_CONFIG_REG);
reg &= ~(CTRL_MODE_MASK << CTRL_MODE_SHIFT);
@@ -1493,6 +1502,62 @@ out_release_res:
@@ -1495,6 +1504,62 @@ out_release_res:
return err;
}
@ -139,7 +139,7 @@ Cc: Miquèl Raynal <miquel.raynal@bootlin.com>
static int advk_pcie_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1625,6 +1690,10 @@ static int advk_pcie_probe(struct platfo
@@ -1627,6 +1692,10 @@ static int advk_pcie_probe(struct platfo
else
pcie->link_gen = ret;

2
target/linux/mvebu/patches-5.4/026-PCI-aardvark-Fix-initialization-with-old-Marvell-s-A.patch
View File

@ -31,7 +31,7 @@ Cc: <stable@vger.kernel.org> # 5.8+: ea17a0f153af: phy: marvell: comphy: Convert
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -1526,7 +1526,9 @@ static int advk_pcie_enable_phy(struct a
@@ -1528,7 +1528,9 @@ static int advk_pcie_enable_phy(struct a
}
ret = phy_power_on(pcie->phy);

6
target/linux/mvebu/patches-5.4/801-pci-mvebu-time-out-reset-on-link-up.patch
View File

@ -13,7 +13,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -936,6 +936,7 @@ static int mvebu_pcie_powerup(struct mve
@@ -944,6 +944,7 @@ static int mvebu_pcie_powerup(struct mve
if (port->reset_gpio) {
u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000;
@ -21,7 +21,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
of_property_read_u32(port->dn, "reset-delay-us",
&reset_udelay);
@@ -943,7 +944,13 @@ static int mvebu_pcie_powerup(struct mve
@@ -951,7 +952,13 @@ static int mvebu_pcie_powerup(struct mve
udelay(100);
gpiod_set_value_cansleep(port->reset_gpio, 0);
@ -36,7 +36,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
}
return 0;
@@ -1107,15 +1114,16 @@ static int mvebu_pcie_probe(struct platf
@@ -1115,15 +1122,16 @@ static int mvebu_pcie_probe(struct platf
if (!child)
continue;

2
target/linux/octeon/patches-5.4/130-itus_shield_support.patch
View File

@ -20,7 +20,7 @@
}
--- a/arch/mips/cavium-octeon/octeon-platform.c
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -771,7 +771,7 @@ int __init octeon_prune_device_tree(void
@@ -773,7 +773,7 @@ int __init octeon_prune_device_tree(void
if (fdt_check_header(initial_boot_params))
panic("Corrupt Device Tree.");

2
target/linux/octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch
View File

@ -22,7 +22,7 @@ Signed-off-by: Tim Harvey <tharvey@gateworks.com>
#include <linux/platform_data/x86/apple.h>
#include <linux/pm_runtime.h>
#include <linux/suspend.h>
@@ -5790,3 +5791,34 @@ static void nvidia_ion_ahci_fixup(struct
@@ -5793,3 +5794,34 @@ static void nvidia_ion_ahci_fixup(struct
pdev->dev_flags |= PCI_DEV_FLAGS_HAS_MSI_MASKING;
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0ab8, nvidia_ion_ahci_fixup);

2
target/linux/ramips/patches-5.4/0031-uvc-add-iPassion-iP2970-support.patch
View File

@ -13,7 +13,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
@@ -2916,6 +2916,18 @@ static const struct usb_device_id uvc_id
@@ -2911,6 +2911,18 @@ static const struct usb_device_id uvc_id
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 0,
.driver_info = UVC_INFO_META(V4L2_META_FMT_D4XX) },

2
target/linux/x86/patches-5.4/200-pcengines-apu2-reboot.patch
View File

@ -1,6 +1,6 @@
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -487,6 +487,16 @@ static const struct dmi_system_id reboot
@@ -479,6 +479,16 @@ static const struct dmi_system_id reboot
},
},