From c6ddf8d5021d5262ecac8648d6ae849a47e1f0fb Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 12 Feb 2022 16:01:04 +0000 Subject: [PATCH] kernel: bump 5.4 to 5.4.179 Many changes were done in drivers/pinctrl/bcm/pinctrl-bcm2835.c between 5.4.171 and 5.4.179. The following 3 patches do not apply any more: * target/linux/bcm27xx/patches-5.4/950-0316-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch This was already integrated in kernel v5.4-rc1, it was never needed. * target/linux/bcm27xx/patches-5.4/950-0328-Revert-pinctrl-bcm2835-Pass-irqchip-when-adding-gpio.patch * target/linux/bcm27xx/patches-5.4/950-0362-pinctrl-bcm2835-Change-init-order-for-gpio-hogs.patch I think these were done to fix the problem which was really fixed in commit 75278f1aff5e ("pinctrl: bcm2835: Change init order for gpio hogs") from v5.4.175 target/linux/generic/backport-5.4/716-v5.5-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch Move fwnode_device_is_available to the same position as in kernel 5.10. target/linux/layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch Applied in commit 65816c1034769e714edb70f59a33bc5472d9e55f ("arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus") Compile-tested: lantiq/xrx200, bcm27xx/bcm2710 Run-tested: lantiq/xrx200 Signed-off-by: Hauke Mehrtens --- include/kernel-version.mk | 4 +- ...cks-early-during-the-boot-process-so.patch | 4 +- ...Mark-used-PLLs-and-dividers-CRITICAL.patch | 2 +- ...lk-bcm2835-Add-claim-clocks-property.patch | 14 +-- ...35-Read-max-core-clock-from-firmware.patch | 8 +- ...-GPIO-clocks-enabled-at-boot-as-crit.patch | 2 +- ...-0027-mm-Remove-the-PFN-busy-warning.patch | 2 +- ...1-Don-t-use-DT-aliases-for-numbering.patch | 2 +- ...0032-amba_pl011-Round-input-clock-up.patch | 6 +- ...Add-cts-event-workaround-DT-property.patch | 2 +- ...Set-base-to-0-give-expected-gpio-num.patch | 2 +- .../950-0037-Add-dwc_otg-driver.patch | 2 +- ...oup-Disable-cgroup-memory-by-default.patch | 8 +- ...-bcm2835-Use-zd-when-printing-size_t.patch | 2 +- ...Better-coalescing-parameter-defaults.patch | 2 +- ...support-for-setting-leaf-clock-rates.patch | 4 +- ...w-reparenting-leaf-clocks-while-they.patch | 10 +- ...-for-updating-interrupt-endpoint-int.patch | 2 +- ...bcm2835-Avoid-null-pointer-exception.patch | 2 +- ...Add-support-for-BCM2711-pull-up-func.patch | 40 ------- ...cm2835-Pass-irqchip-when-adding-gpio.patch | 107 ------------------ ...0-0347-clk-bcm2835-Disable-v3d-clock.patch | 4 +- ...trl-bcm2835-Remove-gpiochip-on-error.patch | 8 +- ...2835-Change-init-order-for-gpio-hogs.patch | 88 -------------- ...-Remove-simple-bus-from-fixed-clocks.patch | 2 +- ...Move-pixelvalve-to-bcm2835-common.dt.patch | 4 +- ...lise-rpi-firmware-before-clk-bcm2835.patch | 2 +- ...y-amba-pl011-Add-un-throttle-support.patch | 2 +- ...rt-all-changes-to-upstream-dts-files.patch | 18 +-- ...-inbound-resource-parsing-to-helpers.patch | 2 +- ...mplement-an-I2C-pinctrl-mux-for-BSC0.patch | 4 +- ...car-csi2-Negotiate-data-lanes-number.patch | 10 +- ...m-Add-compatible-string-for-BCM43540.patch | 2 +- ...Add-entry-for-BCM4335A0-UART-bluetoo.patch | 2 +- ...cm-Disallow-set_baudrate-for-BCM4354.patch | 6 +- ...th-hci_bcm-Support-pcm-params-in-dts.patch | 8 +- ...-hci_bcm-Drive-RTS-only-for-BCM43438.patch | 4 +- ...et-bcmgenet-Reset-RBUF-on-first-open.patch | 2 +- ...it-out-the-BCM54213PE-from-the-BCM54.patch | 2 +- ...IPS-BCM63XX-add-support-for-BCM63268.patch | 4 +- ...MIPS-BCM63XX-add-support-for-BCM6318.patch | 6 +- ...X-add-clkdev-lookups-for-device-tree.patch | 20 ++-- .../430-MIPS-BCM63XX-add-nand-clocks.patch | 6 +- ...ve-fwnode-parsing-into-sfp-bus-layer.patch | 14 ++- ....5-net-sfp-rework-upstream-interface.patch | 4 +- .../generic/hack-5.4/902-debloat_proc.patch | 6 +- ...e_mem_map-with-ARCH_PFN_OFFSET-calcu.patch | 2 +- .../pending-5.4/630-packet_socket_type.patch | 16 +-- ...-support-hardware-flow-table-offload.patch | 2 +- ...ng-with-source-address-failed-policy.patch | 2 +- ...le-start-stop-upstream-notifications.patch | 2 +- ...d-set-ipq40xx-watchdog-to-allow-boot.patch | 2 +- ...-arm64-dts-ls1028a-add-flexspi-nodes.patch | 2 +- ...-Add-support-DP-nodes-for-LS1028AQDS.patch | 2 +- ...arm64-ls1028a-qds-correct-bus-of-rtc.patch | 42 ------- ...8a-define-networking-options-for-QDS.patch | 2 +- ...92-arm64-dts-ls1028a-Add-DP-DT-nodes.patch | 2 +- ...1028a-qds-Add-overlays-for-various-s.patch | 2 +- ...link-too-be-created-with-a-cftype-fi.patch | 4 +- ...bfq-revert-bfq.weight-symlink-change.patch | 4 +- ...ve-dev_err-usage-after-platform_get_.patch | 4 +- ...move-EH-SINGLE_STEP_SET_FEATURE-impl.patch | 2 +- ...e-print-suggested-message-if-failed-.patch | 2 +- ...agate-resolved-link-config-via-mac_l.patch | 2 +- .../019-PCI-aardvark-Add-PHY-support.patch | 4 +- ...-initialization-with-old-Marvell-s-A.patch | 2 +- ...-pci-mvebu-time-out-reset-on-link-up.patch | 6 +- .../patches-5.4/130-itus_shield_support.patch | 2 +- ...r-Gateworks-PLX-PEX860x-switch-with-.patch | 2 +- ...0031-uvc-add-iPassion-iP2970-support.patch | 2 +- .../200-pcengines-apu2-reboot.patch | 2 +- 71 files changed, 153 insertions(+), 420 deletions(-) delete mode 100644 target/linux/bcm27xx/patches-5.4/950-0316-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch delete mode 100644 target/linux/bcm27xx/patches-5.4/950-0328-Revert-pinctrl-bcm2835-Pass-irqchip-when-adding-gpio.patch delete mode 100644 target/linux/bcm27xx/patches-5.4/950-0362-pinctrl-bcm2835-Change-init-order-for-gpio-hogs.patch delete mode 100644 target/linux/layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch diff --git a/include/kernel-version.mk b/include/kernel-version.mk index bb1bba06be..0f035ac3fe 100644 --- a/include/kernel-version.mk +++ b/include/kernel-version.mk @@ -6,9 +6,9 @@ ifdef CONFIG_TESTING_KERNEL KERNEL_PATCHVER:=$(KERNEL_TESTING_PATCHVER) endif -LINUX_VERSION-5.4 = .171 +LINUX_VERSION-5.4 = .179 -LINUX_KERNEL_HASH-5.4.171 = afbcc8ed7d85485af299567f307b03057ffff3ec7bee02a21c33933d435b4958 +LINUX_KERNEL_HASH-5.4.179 = 2c9bdec0922a95aff34e8d53d2e0ecf7e842033cd908d2959a43d34afb5d897d remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1)))) sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1))))))) diff --git a/target/linux/bcm27xx/patches-5.4/950-0018-Register-the-clocks-early-during-the-boot-process-so.patch b/target/linux/bcm27xx/patches-5.4/950-0018-Register-the-clocks-early-during-the-boot-process-so.patch index 64b984802c..5b22f16910 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0018-Register-the-clocks-early-during-the-boot-process-so.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0018-Register-the-clocks-early-during-the-boot-process-so.patch @@ -13,7 +13,7 @@ Signed-off-by: Martin Sperl --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -2267,8 +2267,15 @@ static int bcm2835_clk_probe(struct plat +@@ -2262,8 +2262,15 @@ static int bcm2835_clk_probe(struct plat if (ret) return ret; @@ -30,7 +30,7 @@ Signed-off-by: Martin Sperl } static const struct cprman_plat_data cprman_bcm2835_plat_data = { -@@ -2294,7 +2301,11 @@ static struct platform_driver bcm2835_cl +@@ -2289,7 +2296,11 @@ static struct platform_driver bcm2835_cl .probe = bcm2835_clk_probe, }; diff --git a/target/linux/bcm27xx/patches-5.4/950-0020-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch b/target/linux/bcm27xx/patches-5.4/950-0020-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch index 309655861b..e4faba4b86 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0020-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0020-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch @@ -14,7 +14,7 @@ Signed-off-by: Phil Elwell --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1381,6 +1381,11 @@ bcm2835_register_pll_divider(struct bcm2 +@@ -1376,6 +1376,11 @@ bcm2835_register_pll_divider(struct bcm2 divider->div.hw.init = &init; divider->div.table = NULL; diff --git a/target/linux/bcm27xx/patches-5.4/950-0021-clk-bcm2835-Add-claim-clocks-property.patch b/target/linux/bcm27xx/patches-5.4/950-0021-clk-bcm2835-Add-claim-clocks-property.patch index 7479210c1a..b732c4f167 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0021-clk-bcm2835-Add-claim-clocks-property.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0021-clk-bcm2835-Add-claim-clocks-property.patch @@ -17,7 +17,7 @@ Signed-off-by: Phil Elwell --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1311,6 +1311,8 @@ static const struct clk_ops bcm2835_vpu_ +@@ -1306,6 +1306,8 @@ static const struct clk_ops bcm2835_vpu_ .debug_init = bcm2835_clock_debug_init, }; @@ -26,7 +26,7 @@ Signed-off-by: Phil Elwell static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman, const struct bcm2835_pll_data *data) { -@@ -1327,6 +1329,9 @@ static struct clk_hw *bcm2835_register_p +@@ -1322,6 +1324,9 @@ static struct clk_hw *bcm2835_register_p init.ops = &bcm2835_pll_clk_ops; init.flags = CLK_IGNORE_UNUSED; @@ -36,7 +36,7 @@ Signed-off-by: Phil Elwell pll = kzalloc(sizeof(*pll), GFP_KERNEL); if (!pll) return NULL; -@@ -1382,8 +1387,10 @@ bcm2835_register_pll_divider(struct bcm2 +@@ -1377,8 +1382,10 @@ bcm2835_register_pll_divider(struct bcm2 divider->div.table = NULL; if (!(cprman_read(cprman, data->cm_reg) & data->hold_mask)) { @@ -49,7 +49,7 @@ Signed-off-by: Phil Elwell } divider->cprman = cprman; -@@ -2191,6 +2198,8 @@ static const struct bcm2835_clk_desc clk +@@ -2186,6 +2193,8 @@ static const struct bcm2835_clk_desc clk .ctl_reg = CM_PERIICTL), }; @@ -58,7 +58,7 @@ Signed-off-by: Phil Elwell /* * Permanently take a reference on the parent of the SDRAM clock. * -@@ -2210,6 +2219,19 @@ static int bcm2835_mark_sdc_parent_criti +@@ -2205,6 +2214,19 @@ static int bcm2835_mark_sdc_parent_criti return clk_prepare_enable(parent); } @@ -78,7 +78,7 @@ Signed-off-by: Phil Elwell static int bcm2835_clk_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; -@@ -2220,6 +2242,7 @@ static int bcm2835_clk_probe(struct plat +@@ -2215,6 +2237,7 @@ static int bcm2835_clk_probe(struct plat const size_t asize = ARRAY_SIZE(clk_desc_array); const struct cprman_plat_data *pdata; size_t i; @@ -86,7 +86,7 @@ Signed-off-by: Phil Elwell int ret; pdata = of_device_get_match_data(&pdev->dev); -@@ -2239,6 +2262,13 @@ static int bcm2835_clk_probe(struct plat +@@ -2234,6 +2257,13 @@ static int bcm2835_clk_probe(struct plat if (IS_ERR(cprman->regs)) return PTR_ERR(cprman->regs); diff --git a/target/linux/bcm27xx/patches-5.4/950-0022-clk-bcm2835-Read-max-core-clock-from-firmware.patch b/target/linux/bcm27xx/patches-5.4/950-0022-clk-bcm2835-Read-max-core-clock-from-firmware.patch index 0ddcf6f1a8..b391bf0579 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0022-clk-bcm2835-Read-max-core-clock-from-firmware.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0022-clk-bcm2835-Read-max-core-clock-from-firmware.patch @@ -50,7 +50,7 @@ Signed-off-by: Phil Elwell spinlock_t regs_lock; /* spinlock for all clocks */ unsigned int soc; -@@ -1015,6 +1019,30 @@ static unsigned long bcm2835_clock_get_r +@@ -1010,6 +1014,30 @@ static unsigned long bcm2835_clock_get_r return bcm2835_clock_rate_from_divisor(clock, parent_rate, div); } @@ -81,7 +81,7 @@ Signed-off-by: Phil Elwell static void bcm2835_clock_wait_busy(struct bcm2835_clock *clock) { struct bcm2835_cprman *cprman = clock->cprman; -@@ -1303,7 +1331,7 @@ static int bcm2835_vpu_clock_is_on(struc +@@ -1298,7 +1326,7 @@ static int bcm2835_vpu_clock_is_on(struc */ static const struct clk_ops bcm2835_vpu_clock_clk_ops = { .is_prepared = bcm2835_vpu_clock_is_on, @@ -90,7 +90,7 @@ Signed-off-by: Phil Elwell .set_rate = bcm2835_clock_set_rate, .determine_rate = bcm2835_clock_determine_rate, .set_parent = bcm2835_clock_set_parent, -@@ -2241,6 +2269,7 @@ static int bcm2835_clk_probe(struct plat +@@ -2236,6 +2264,7 @@ static int bcm2835_clk_probe(struct plat const struct bcm2835_clk_desc *desc; const size_t asize = ARRAY_SIZE(clk_desc_array); const struct cprman_plat_data *pdata; @@ -98,7 +98,7 @@ Signed-off-by: Phil Elwell size_t i; u32 clk_id; int ret; -@@ -2262,6 +2291,14 @@ static int bcm2835_clk_probe(struct plat +@@ -2257,6 +2286,14 @@ static int bcm2835_clk_probe(struct plat if (IS_ERR(cprman->regs)) return PTR_ERR(cprman->regs); diff --git a/target/linux/bcm27xx/patches-5.4/950-0023-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch b/target/linux/bcm27xx/patches-5.4/950-0023-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch index 61d9edf3eb..e6835780b8 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0023-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0023-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch @@ -20,7 +20,7 @@ Signed-off-by: Eric Anholt --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1473,6 +1473,15 @@ static struct clk_hw *bcm2835_register_c +@@ -1468,6 +1468,15 @@ static struct clk_hw *bcm2835_register_c init.flags = data->flags | CLK_IGNORE_UNUSED; /* diff --git a/target/linux/bcm27xx/patches-5.4/950-0027-mm-Remove-the-PFN-busy-warning.patch b/target/linux/bcm27xx/patches-5.4/950-0027-mm-Remove-the-PFN-busy-warning.patch index d643656746..c0605ab545 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0027-mm-Remove-the-PFN-busy-warning.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0027-mm-Remove-the-PFN-busy-warning.patch @@ -14,7 +14,7 @@ Signed-off-by: Eric Anholt --- a/mm/page_alloc.c +++ b/mm/page_alloc.c -@@ -8512,8 +8512,6 @@ int alloc_contig_range(unsigned long sta +@@ -8514,8 +8514,6 @@ int alloc_contig_range(unsigned long sta /* Make sure the range is really isolated. */ if (test_pages_isolated(outer_start, end, false)) { diff --git a/target/linux/bcm27xx/patches-5.4/950-0031-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch b/target/linux/bcm27xx/patches-5.4/950-0031-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch index 79212447fa..16a835f5a0 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0031-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0031-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch @@ -14,7 +14,7 @@ use the same logic. --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c -@@ -2578,7 +2578,12 @@ static int pl011_setup_port(struct devic +@@ -2557,7 +2557,12 @@ static int pl011_setup_port(struct devic if (IS_ERR(base)) return PTR_ERR(base); diff --git a/target/linux/bcm27xx/patches-5.4/950-0032-amba_pl011-Round-input-clock-up.patch b/target/linux/bcm27xx/patches-5.4/950-0032-amba_pl011-Round-input-clock-up.patch index 912ff563c7..e7892d3103 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0032-amba_pl011-Round-input-clock-up.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0032-amba_pl011-Round-input-clock-up.patch @@ -59,7 +59,7 @@ Signed-off-by: Phil Elwell /* Clear pending error and receive interrupts */ pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS | -@@ -2324,7 +2341,7 @@ static int pl011_console_setup(struct co +@@ -2303,7 +2320,7 @@ static int pl011_console_setup(struct co plat->init(); } @@ -68,7 +68,7 @@ Signed-off-by: Phil Elwell if (uap->vendor->fixed_options) { baud = uap->fixed_baud; -@@ -2509,6 +2526,7 @@ static struct uart_driver amba_reg = { +@@ -2488,6 +2505,7 @@ static struct uart_driver amba_reg = { .cons = AMBA_CONSOLE, }; @@ -76,7 +76,7 @@ Signed-off-by: Phil Elwell static int pl011_probe_dt_alias(int index, struct device *dev) { struct device_node *np; -@@ -2540,6 +2558,7 @@ static int pl011_probe_dt_alias(int inde +@@ -2519,6 +2537,7 @@ static int pl011_probe_dt_alias(int inde return ret; } diff --git a/target/linux/bcm27xx/patches-5.4/950-0034-amba_pl011-Add-cts-event-workaround-DT-property.patch b/target/linux/bcm27xx/patches-5.4/950-0034-amba_pl011-Add-cts-event-workaround-DT-property.patch index df8e9aba78..3bbbed2f98 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0034-amba_pl011-Add-cts-event-workaround-DT-property.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0034-amba_pl011-Add-cts-event-workaround-DT-property.patch @@ -36,7 +36,7 @@ Signed-off-by: Phil Elwell - reg --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c -@@ -2665,6 +2665,11 @@ static int pl011_probe(struct amba_devic +@@ -2644,6 +2644,11 @@ static int pl011_probe(struct amba_devic if (IS_ERR(uap->clk)) return PTR_ERR(uap->clk); diff --git a/target/linux/bcm27xx/patches-5.4/950-0035-pinctrl-bcm2835-Set-base-to-0-give-expected-gpio-num.patch b/target/linux/bcm27xx/patches-5.4/950-0035-pinctrl-bcm2835-Set-base-to-0-give-expected-gpio-num.patch index e42fa9c9bd..80fc587572 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0035-pinctrl-bcm2835-Set-base-to-0-give-expected-gpio-num.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0035-pinctrl-bcm2835-Set-base-to-0-give-expected-gpio-num.patch @@ -11,7 +11,7 @@ Signed-off-by: Noralf Tronnes --- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c +++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c -@@ -350,7 +350,7 @@ static const struct gpio_chip bcm2835_gp +@@ -359,7 +359,7 @@ static const struct gpio_chip bcm2835_gp .get = bcm2835_gpio_get, .set = bcm2835_gpio_set, .set_config = gpiochip_generic_config, diff --git a/target/linux/bcm27xx/patches-5.4/950-0037-Add-dwc_otg-driver.patch b/target/linux/bcm27xx/patches-5.4/950-0037-Add-dwc_otg-driver.patch index b7cf6857ab..c79751c2c7 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0037-Add-dwc_otg-driver.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0037-Add-dwc_otg-driver.patch @@ -1040,7 +1040,7 @@ Signed-off-by: Jonathan Bell } --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c -@@ -5379,7 +5379,7 @@ static void port_event(struct usb_hub *h +@@ -5382,7 +5382,7 @@ static void port_event(struct usb_hub *h port_dev->over_current_count++; port_over_current_notify(port_dev); diff --git a/target/linux/bcm27xx/patches-5.4/950-0089-cgroup-Disable-cgroup-memory-by-default.patch b/target/linux/bcm27xx/patches-5.4/950-0089-cgroup-Disable-cgroup-memory-by-default.patch index aa7629ac0b..d3ae747a7a 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0089-cgroup-Disable-cgroup-memory-by-default.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0089-cgroup-Disable-cgroup-memory-by-default.patch @@ -17,7 +17,7 @@ Signed-off-by: Phil Elwell --- a/kernel/cgroup/cgroup.c +++ b/kernel/cgroup/cgroup.c -@@ -5744,6 +5744,9 @@ int __init cgroup_init_early(void) +@@ -5749,6 +5749,9 @@ int __init cgroup_init_early(void) return 0; } @@ -27,7 +27,7 @@ Signed-off-by: Phil Elwell /** * cgroup_init - cgroup initialization * -@@ -5782,6 +5785,12 @@ int __init cgroup_init(void) +@@ -5787,6 +5790,12 @@ int __init cgroup_init(void) mutex_unlock(&cgroup_mutex); @@ -40,7 +40,7 @@ Signed-off-by: Phil Elwell for_each_subsys(ss, ssid) { if (ss->early_init) { struct cgroup_subsys_state *css = -@@ -6191,6 +6200,10 @@ static int __init cgroup_disable(char *s +@@ -6196,6 +6205,10 @@ static int __init cgroup_disable(char *s strcmp(token, ss->legacy_name)) continue; @@ -51,7 +51,7 @@ Signed-off-by: Phil Elwell static_branch_disable(cgroup_subsys_enabled_key[i]); pr_info("Disabling %s control group subsystem\n", ss->name); -@@ -6200,6 +6213,31 @@ static int __init cgroup_disable(char *s +@@ -6205,6 +6218,31 @@ static int __init cgroup_disable(char *s } __setup("cgroup_disable=", cgroup_disable); diff --git a/target/linux/bcm27xx/patches-5.4/950-0177-clk-clk-bcm2835-Use-zd-when-printing-size_t.patch b/target/linux/bcm27xx/patches-5.4/950-0177-clk-clk-bcm2835-Use-zd-when-printing-size_t.patch index c8acb1a378..6cdab9c2a3 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0177-clk-clk-bcm2835-Use-zd-when-printing-size_t.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0177-clk-clk-bcm2835-Use-zd-when-printing-size_t.patch @@ -13,7 +13,7 @@ Signed-off-by: Dave Stevenson --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -2354,7 +2354,7 @@ static int bcm2835_clk_probe(struct plat +@@ -2349,7 +2349,7 @@ static int bcm2835_clk_probe(struct plat return ret; /* note that we have registered all the clocks */ diff --git a/target/linux/bcm27xx/patches-5.4/950-0208-bcmgenet-Better-coalescing-parameter-defaults.patch b/target/linux/bcm27xx/patches-5.4/950-0208-bcmgenet-Better-coalescing-parameter-defaults.patch index b245fbbbfd..baaed03855 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0208-bcmgenet-Better-coalescing-parameter-defaults.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0208-bcmgenet-Better-coalescing-parameter-defaults.patch @@ -27,7 +27,7 @@ Signed-off-by: Phil Elwell /* Disable rate control for now */ bcmgenet_tdma_ring_writel(priv, index, flow_period_val, TDMA_FLOW_PERIOD); -@@ -3574,9 +3574,12 @@ static int bcmgenet_probe(struct platfor +@@ -3576,9 +3576,12 @@ static int bcmgenet_probe(struct platfor netif_set_real_num_rx_queues(priv->dev, priv->hw_params->rx_queues + 1); /* Set default coalescing parameters */ diff --git a/target/linux/bcm27xx/patches-5.4/950-0216-clk-bcm2835-Add-support-for-setting-leaf-clock-rates.patch b/target/linux/bcm27xx/patches-5.4/950-0216-clk-bcm2835-Add-support-for-setting-leaf-clock-rates.patch index 3227f8c914..064e464dfd 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0216-clk-bcm2835-Add-support-for-setting-leaf-clock-rates.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0216-clk-bcm2835-Add-support-for-setting-leaf-clock-rates.patch @@ -14,7 +14,7 @@ Signed-off-by: Eric Anholt --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1114,15 +1114,19 @@ static int bcm2835_clock_set_rate(struct +@@ -1109,15 +1109,19 @@ static int bcm2835_clock_set_rate(struct spin_lock(&cprman->regs_lock); @@ -42,7 +42,7 @@ Signed-off-by: Eric Anholt ctl |= (div & CM_DIV_FRAC_MASK) ? CM_FRAC : 0; cprman_write(cprman, data->ctl_reg, ctl); -@@ -1494,7 +1498,7 @@ static struct clk_hw *bcm2835_register_c +@@ -1489,7 +1493,7 @@ static struct clk_hw *bcm2835_register_c init.ops = &bcm2835_vpu_clock_clk_ops; } else { init.ops = &bcm2835_clock_clk_ops; diff --git a/target/linux/bcm27xx/patches-5.4/950-0217-clk-bcm2835-Allow-reparenting-leaf-clocks-while-they.patch b/target/linux/bcm27xx/patches-5.4/950-0217-clk-bcm2835-Allow-reparenting-leaf-clocks-while-they.patch index bae0f84e1a..5b49ee727c 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0217-clk-bcm2835-Allow-reparenting-leaf-clocks-while-they.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0217-clk-bcm2835-Allow-reparenting-leaf-clocks-while-they.patch @@ -15,7 +15,7 @@ Signed-off-by: Eric Anholt --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1103,8 +1103,10 @@ static int bcm2835_clock_on(struct clk_h +@@ -1098,8 +1098,10 @@ static int bcm2835_clock_on(struct clk_h return 0; } @@ -28,7 +28,7 @@ Signed-off-by: Eric Anholt { struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); struct bcm2835_cprman *cprman = clock->cprman; -@@ -1126,6 +1128,11 @@ static int bcm2835_clock_set_rate(struct +@@ -1121,6 +1123,11 @@ static int bcm2835_clock_set_rate(struct bcm2835_clock_wait_busy(clock); } @@ -40,7 +40,7 @@ Signed-off-by: Eric Anholt ctl &= ~CM_FRAC; ctl |= (div & CM_DIV_FRAC_MASK) ? CM_FRAC : 0; cprman_write(cprman, data->ctl_reg, ctl); -@@ -1137,6 +1144,12 @@ static int bcm2835_clock_set_rate(struct +@@ -1132,6 +1139,12 @@ static int bcm2835_clock_set_rate(struct return 0; } @@ -53,7 +53,7 @@ Signed-off-by: Eric Anholt static bool bcm2835_clk_is_pllc(struct clk_hw *hw) { -@@ -1320,6 +1333,7 @@ static const struct clk_ops bcm2835_cloc +@@ -1315,6 +1328,7 @@ static const struct clk_ops bcm2835_cloc .unprepare = bcm2835_clock_off, .recalc_rate = bcm2835_clock_get_rate, .set_rate = bcm2835_clock_set_rate, @@ -61,7 +61,7 @@ Signed-off-by: Eric Anholt .determine_rate = bcm2835_clock_determine_rate, .set_parent = bcm2835_clock_set_parent, .get_parent = bcm2835_clock_get_parent, -@@ -1498,7 +1512,6 @@ static struct clk_hw *bcm2835_register_c +@@ -1493,7 +1507,6 @@ static struct clk_hw *bcm2835_register_c init.ops = &bcm2835_vpu_clock_clk_ops; } else { init.ops = &bcm2835_clock_clk_ops; diff --git a/target/linux/bcm27xx/patches-5.4/950-0218-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch b/target/linux/bcm27xx/patches-5.4/950-0218-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch index f654cd8a57..9c0f2cdb8e 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0218-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0218-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch @@ -27,7 +27,7 @@ Signed-off-by: Jonathan Bell --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c -@@ -1941,6 +1941,16 @@ reset: +@@ -1962,6 +1962,16 @@ reset: return ret; } diff --git a/target/linux/bcm27xx/patches-5.4/950-0267-clk-bcm2835-Avoid-null-pointer-exception.patch b/target/linux/bcm27xx/patches-5.4/950-0267-clk-bcm2835-Avoid-null-pointer-exception.patch index 8a529af7b0..100474bf77 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0267-clk-bcm2835-Avoid-null-pointer-exception.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0267-clk-bcm2835-Avoid-null-pointer-exception.patch @@ -12,7 +12,7 @@ Signed-off-by: popcornmix --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -2280,9 +2280,11 @@ static bool bcm2835_clk_is_claimed(const +@@ -2275,9 +2275,11 @@ static bool bcm2835_clk_is_claimed(const int i; for (i = 0; i < ARRAY_SIZE(clk_desc_array); i++) { diff --git a/target/linux/bcm27xx/patches-5.4/950-0316-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch b/target/linux/bcm27xx/patches-5.4/950-0316-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch deleted file mode 100644 index 2ad17cb17c..0000000000 --- a/target/linux/bcm27xx/patches-5.4/950-0316-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch +++ /dev/null @@ -1,40 +0,0 @@ -From cf658ebc86b3e22c0b77e136fbbf19b580c7c256 Mon Sep 17 00:00:00 2001 -From: Stefan Wahren -Date: Sun, 21 Jul 2019 16:01:36 +0200 -Subject: [PATCH] pinctrl: bcm2835: Add support for BCM2711 pull-up - functionality - -commit e38a9a437fb93ddafab5030165e4c6a3a5021669 upstream. - -The BCM2711 has a new way of selecting the pull-up/pull-down setting -for a GPIO pin. The registers used for the BCM2835, GP_PUD and -GP_PUDCLKn0, are no longer connected. A new set of registers, -GP_GPIO_PUP_PDN_CNTRL_REGx must be used. This commit will add -a new compatible string "brcm,bcm2711-gpio" and the kernel -driver will use it to select which method is used to select -pull-up/pull-down. - -This patch based on a patch by Al Cooper which was intended for the -BCM7211. This is a bugfixed and improved version. - -Signed-off-by: Stefan Wahren -Acked-by: Eric Anholt ---- - drivers/pinctrl/bcm/pinctrl-bcm2835.c | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c -+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c -@@ -1168,6 +1168,12 @@ static int bcm2835_pinctrl_probe(struct - (const struct pinconf_ops *)match->data; - } - -+ match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node); -+ if (match) { -+ bcm2835_pinctrl_desc.confops = -+ (const struct pinconf_ops *)match->data; -+ } -+ - pc->pctl_dev = devm_pinctrl_register(dev, &bcm2835_pinctrl_desc, pc); - if (IS_ERR(pc->pctl_dev)) { - gpiochip_remove(&pc->gpio_chip); diff --git a/target/linux/bcm27xx/patches-5.4/950-0328-Revert-pinctrl-bcm2835-Pass-irqchip-when-adding-gpio.patch b/target/linux/bcm27xx/patches-5.4/950-0328-Revert-pinctrl-bcm2835-Pass-irqchip-when-adding-gpio.patch deleted file mode 100644 index f2cf28433a..0000000000 --- a/target/linux/bcm27xx/patches-5.4/950-0328-Revert-pinctrl-bcm2835-Pass-irqchip-when-adding-gpio.patch +++ /dev/null @@ -1,107 +0,0 @@ -From b1d33d1e5a44afd2025c5a44a85dc2fab00ec6a7 Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Tue, 5 Nov 2019 11:28:19 +0000 -Subject: [PATCH] Revert "pinctrl: bcm2835: Pass irqchip when adding - gpiochip" - -This reverts commit 73345a18d464b1b945b29f54f630ace6873344e2. ---- - drivers/pinctrl/bcm/pinctrl-bcm2835.c | 55 +++++++++++++++------------ - 1 file changed, 30 insertions(+), 25 deletions(-) - ---- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c -+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c -@@ -78,6 +78,7 @@ - struct bcm2835_pinctrl { - struct device *dev; - void __iomem *base; -+ int irq[BCM2835_NUM_IRQS]; - - /* note: locking assumes each bank will have its own unsigned long */ - unsigned long enabled_irq_map[BCM2835_NUM_BANKS]; -@@ -381,14 +382,14 @@ static void bcm2835_gpio_irq_handler(str - int group; - int i; - -- for (i = 0; i < BCM2835_NUM_IRQS; i++) { -- if (chip->irq.parents[i] == irq) { -+ for (i = 0; i < ARRAY_SIZE(pc->irq); i++) { -+ if (pc->irq[i] == irq) { - group = i; - break; - } - } - /* This should not happen, every IRQ has a bank */ -- if (i == BCM2835_NUM_IRQS) -+ if (i == ARRAY_SIZE(pc->irq)) - BUG(); - - chained_irq_enter(host_chip, desc); -@@ -1086,7 +1087,6 @@ static int bcm2835_pinctrl_probe(struct - struct device *dev = &pdev->dev; - struct device_node *np = dev->of_node; - struct bcm2835_pinctrl *pc; -- struct gpio_irq_chip *girq; - struct resource iomem; - int err, i; - const struct of_device_id *match; -@@ -1135,33 +1135,38 @@ static int bcm2835_pinctrl_probe(struct - raw_spin_lock_init(&pc->irq_lock[i]); - } - -- girq = &pc->gpio_chip.irq; -- girq->chip = &bcm2835_gpio_irq_chip; -- girq->parent_handler = bcm2835_gpio_irq_handler; -- girq->num_parents = BCM2835_NUM_IRQS; -- girq->parents = devm_kcalloc(dev, BCM2835_NUM_IRQS, -- sizeof(*girq->parents), -- GFP_KERNEL); -- if (!girq->parents) -- return -ENOMEM; -- /* -- * Use the same handler for all groups: this is necessary -- * since we use one gpiochip to cover all lines - the -- * irq handler then needs to figure out which group and -- * bank that was firing the IRQ and look up the per-group -- * and bank data. -- */ -- for (i = 0; i < BCM2835_NUM_IRQS; i++) -- girq->parents[i] = irq_of_parse_and_map(np, i); -- girq->default_type = IRQ_TYPE_NONE; -- girq->handler = handle_level_irq; -- - err = gpiochip_add_data(&pc->gpio_chip, pc); - if (err) { - dev_err(dev, "could not add GPIO chip\n"); - return err; - } - -+ err = gpiochip_irqchip_add(&pc->gpio_chip, &bcm2835_gpio_irq_chip, -+ 0, handle_level_irq, IRQ_TYPE_NONE); -+ if (err) { -+ dev_info(dev, "could not add irqchip\n"); -+ return err; -+ } -+ -+ for (i = 0; i < BCM2835_NUM_IRQS; i++) { -+ pc->irq[i] = irq_of_parse_and_map(np, i); -+ -+ if (pc->irq[i] == 0) -+ continue; -+ -+ /* -+ * Use the same handler for all groups: this is necessary -+ * since we use one gpiochip to cover all lines - the -+ * irq handler then needs to figure out which group and -+ * bank that was firing the IRQ and look up the per-group -+ * and bank data. -+ */ -+ gpiochip_set_chained_irqchip(&pc->gpio_chip, -+ &bcm2835_gpio_irq_chip, -+ pc->irq[i], -+ bcm2835_gpio_irq_handler); -+ } -+ - match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node); - if (match) { - bcm2835_pinctrl_desc.confops = diff --git a/target/linux/bcm27xx/patches-5.4/950-0347-clk-bcm2835-Disable-v3d-clock.patch b/target/linux/bcm27xx/patches-5.4/950-0347-clk-bcm2835-Disable-v3d-clock.patch index a7a5221fab..49a47c7294 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0347-clk-bcm2835-Disable-v3d-clock.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0347-clk-bcm2835-Disable-v3d-clock.patch @@ -12,7 +12,7 @@ Signed-off-by: popcornmix --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1734,16 +1734,12 @@ static const struct bcm2835_clk_desc clk +@@ -1729,16 +1729,12 @@ static const struct bcm2835_clk_desc clk .hold_mask = CM_PLLA_HOLDCORE, .fixed_divider = 1, .flags = CLK_SET_RATE_PARENT), @@ -35,7 +35,7 @@ Signed-off-by: popcornmix [BCM2835_PLLA_DSI0] = REGISTER_PLL_DIV( SOC_ALL, .name = "plla_dsi0", -@@ -2021,14 +2017,12 @@ static const struct bcm2835_clk_desc clk +@@ -2016,14 +2012,12 @@ static const struct bcm2835_clk_desc clk .int_bits = 6, .frac_bits = 0, .tcnt_mux = 3), diff --git a/target/linux/bcm27xx/patches-5.4/950-0361-pinctrl-bcm2835-Remove-gpiochip-on-error.patch b/target/linux/bcm27xx/patches-5.4/950-0361-pinctrl-bcm2835-Remove-gpiochip-on-error.patch index 31a1a24caf..a772bf453f 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0361-pinctrl-bcm2835-Remove-gpiochip-on-error.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0361-pinctrl-bcm2835-Remove-gpiochip-on-error.patch @@ -14,12 +14,12 @@ Signed-off-by: Phil Elwell --- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c +++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c -@@ -1135,7 +1135,7 @@ static int bcm2835_pinctrl_probe(struct - raw_spin_lock_init(&pc->irq_lock[i]); - } +@@ -1315,7 +1315,7 @@ static int bcm2835_pinctrl_probe(struct + girq->default_type = IRQ_TYPE_NONE; + girq->handler = handle_level_irq; - err = gpiochip_add_data(&pc->gpio_chip, pc); + err = devm_gpiochip_add_data(dev, &pc->gpio_chip, pc); if (err) { dev_err(dev, "could not add GPIO chip\n"); - return err; + goto out_remove; diff --git a/target/linux/bcm27xx/patches-5.4/950-0362-pinctrl-bcm2835-Change-init-order-for-gpio-hogs.patch b/target/linux/bcm27xx/patches-5.4/950-0362-pinctrl-bcm2835-Change-init-order-for-gpio-hogs.patch deleted file mode 100644 index 3865ae11fb..0000000000 --- a/target/linux/bcm27xx/patches-5.4/950-0362-pinctrl-bcm2835-Change-init-order-for-gpio-hogs.patch +++ /dev/null @@ -1,88 +0,0 @@ -From 27cb8bf0442f677380a1df93b93b7589b7ce5243 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 6 Jan 2020 14:05:42 +0000 -Subject: [PATCH] pinctrl: bcm2835: Change init order for gpio hogs - -pinctrl-bcm2835 is a combined pinctrl/gpio driver. Currently the gpio -side is registered first, but this breaks gpio hogs (which are -configured during gpiochip_add_data). Part of the hog initialisation -is a call to pinctrl_gpio_request, and since the pinctrl driver hasn't -yet been registered this results in an -EPROBE_DEFER from which it can -never recover. - -Change the initialisation sequence to register the pinctrl driver -first. - -See: https://www.raspberrypi.org/forums/viewtopic.php?f=107&t=260600 - -Signed-off-by: Phil Elwell ---- - drivers/pinctrl/bcm/pinctrl-bcm2835.c | 40 ++++++++++++--------------- - 1 file changed, 17 insertions(+), 23 deletions(-) - ---- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c -+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c -@@ -1135,9 +1135,25 @@ static int bcm2835_pinctrl_probe(struct - raw_spin_lock_init(&pc->irq_lock[i]); - } - -+ match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node); -+ if (match) { -+ bcm2835_pinctrl_desc.confops = -+ (const struct pinconf_ops *)match->data; -+ } -+ -+ pc->pctl_dev = devm_pinctrl_register(dev, &bcm2835_pinctrl_desc, pc); -+ if (IS_ERR(pc->pctl_dev)) -+ return PTR_ERR(pc->pctl_dev); -+ -+ pc->gpio_range = bcm2835_pinctrl_gpio_range; -+ pc->gpio_range.base = pc->gpio_chip.base; -+ pc->gpio_range.gc = &pc->gpio_chip; -+ pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range); -+ - err = devm_gpiochip_add_data(dev, &pc->gpio_chip, pc); - if (err) { - dev_err(dev, "could not add GPIO chip\n"); -+ pinctrl_remove_gpio_range(pc->pctl_dev, &pc->gpio_range); - return err; - } - -@@ -1145,6 +1161,7 @@ static int bcm2835_pinctrl_probe(struct - 0, handle_level_irq, IRQ_TYPE_NONE); - if (err) { - dev_info(dev, "could not add irqchip\n"); -+ pinctrl_remove_gpio_range(pc->pctl_dev, &pc->gpio_range); - return err; - } - -@@ -1167,29 +1184,6 @@ static int bcm2835_pinctrl_probe(struct - bcm2835_gpio_irq_handler); - } - -- match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node); -- if (match) { -- bcm2835_pinctrl_desc.confops = -- (const struct pinconf_ops *)match->data; -- } -- -- match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node); -- if (match) { -- bcm2835_pinctrl_desc.confops = -- (const struct pinconf_ops *)match->data; -- } -- -- pc->pctl_dev = devm_pinctrl_register(dev, &bcm2835_pinctrl_desc, pc); -- if (IS_ERR(pc->pctl_dev)) { -- gpiochip_remove(&pc->gpio_chip); -- return PTR_ERR(pc->pctl_dev); -- } -- -- pc->gpio_range = bcm2835_pinctrl_gpio_range; -- pc->gpio_range.base = pc->gpio_chip.base; -- pc->gpio_range.gc = &pc->gpio_chip; -- pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range); -- - return 0; - } - diff --git a/target/linux/bcm27xx/patches-5.4/950-0364-ARM-dts-bcm283x-Remove-simple-bus-from-fixed-clocks.patch b/target/linux/bcm27xx/patches-5.4/950-0364-ARM-dts-bcm283x-Remove-simple-bus-from-fixed-clocks.patch index db90055343..6f0044a848 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0364-ARM-dts-bcm283x-Remove-simple-bus-from-fixed-clocks.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0364-ARM-dts-bcm283x-Remove-simple-bus-from-fixed-clocks.patch @@ -24,7 +24,7 @@ Signed-off-by: Stefan Wahren --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi -@@ -635,22 +635,16 @@ +@@ -636,22 +636,16 @@ }; clocks { diff --git a/target/linux/bcm27xx/patches-5.4/950-0366-ARM-dts-bcm283x-Move-pixelvalve-to-bcm2835-common.dt.patch b/target/linux/bcm27xx/patches-5.4/950-0366-ARM-dts-bcm283x-Move-pixelvalve-to-bcm2835-common.dt.patch index 218a846fa3..5be9738355 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0366-ARM-dts-bcm283x-Move-pixelvalve-to-bcm2835-common.dt.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0366-ARM-dts-bcm283x-Move-pixelvalve-to-bcm2835-common.dt.patch @@ -78,7 +78,7 @@ Signed-off-by: Stefan Wahren arm-pmu { --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi -@@ -432,18 +432,6 @@ +@@ -433,18 +433,6 @@ status = "disabled"; }; @@ -97,7 +97,7 @@ Signed-off-by: Stefan Wahren dpi: dpi@7e208000 { compatible = "brcm,bcm2835-dpi"; reg = <0x7e208000 0x8c>; -@@ -608,12 +596,6 @@ +@@ -609,12 +597,6 @@ status = "disabled"; }; diff --git a/target/linux/bcm27xx/patches-5.4/950-0389-Initialise-rpi-firmware-before-clk-bcm2835.patch b/target/linux/bcm27xx/patches-5.4/950-0389-Initialise-rpi-firmware-before-clk-bcm2835.patch index cdd5e7e9ab..ec26bfbb7d 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0389-Initialise-rpi-firmware-before-clk-bcm2835.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0389-Initialise-rpi-firmware-before-clk-bcm2835.patch @@ -25,7 +25,7 @@ Co-authored-by: Phil Elwell --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -2401,7 +2401,7 @@ static int __init __bcm2835_clk_driver_i +@@ -2396,7 +2396,7 @@ static int __init __bcm2835_clk_driver_i { return platform_driver_register(&bcm2835_clk_driver); } diff --git a/target/linux/bcm27xx/patches-5.4/950-0392-tty-amba-pl011-Add-un-throttle-support.patch b/target/linux/bcm27xx/patches-5.4/950-0392-tty-amba-pl011-Add-un-throttle-support.patch index ced0bf2b79..e083237598 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0392-tty-amba-pl011-Add-un-throttle-support.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0392-tty-amba-pl011-Add-un-throttle-support.patch @@ -50,7 +50,7 @@ Signed-off-by: Phil Elwell static void pl011_stop_rx(struct uart_port *port) { struct uart_amba_port *uap = -@@ -2167,6 +2193,8 @@ static const struct uart_ops amba_pl011_ +@@ -2150,6 +2176,8 @@ static const struct uart_ops amba_pl011_ .stop_tx = pl011_stop_tx, .start_tx = pl011_start_tx, .stop_rx = pl011_stop_rx, diff --git a/target/linux/bcm27xx/patches-5.4/950-0411-ARM-dts-Revert-all-changes-to-upstream-dts-files.patch b/target/linux/bcm27xx/patches-5.4/950-0411-ARM-dts-Revert-all-changes-to-upstream-dts-files.patch index 403f534baf..9c3e597333 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0411-ARM-dts-Revert-all-changes-to-upstream-dts-files.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0411-ARM-dts-Revert-all-changes-to-upstream-dts-files.patch @@ -1771,7 +1771,7 @@ Signed-off-by: Phil Elwell compatible = "brcm,bcm2835-rng"; reg = <0x7e104000 0x10>; interrupts = <2 29>; -@@ -269,35 +212,6 @@ +@@ -270,35 +213,6 @@ brcm,function = ; }; @@ -1807,7 +1807,7 @@ Signed-off-by: Phil Elwell sdhost_gpio48: sdhost_gpio48 { brcm,pins = <48 49 50 51 52 53>; brcm,function = ; -@@ -379,7 +293,7 @@ +@@ -380,7 +294,7 @@ }; uart0: serial@7e201000 { @@ -1816,7 +1816,7 @@ Signed-off-by: Phil Elwell reg = <0x7e201000 0x200>; interrupts = <2 25>; clocks = <&clocks BCM2835_CLOCK_UART>, -@@ -393,8 +307,6 @@ +@@ -394,8 +308,6 @@ reg = <0x7e202000 0x100>; interrupts = <2 24>; clocks = <&clocks BCM2835_CLOCK_VPU>; @@ -1825,7 +1825,7 @@ Signed-off-by: Phil Elwell status = "disabled"; }; -@@ -402,10 +314,6 @@ +@@ -403,10 +315,6 @@ compatible = "brcm,bcm2835-i2s"; reg = <0x7e203000 0x24>; clocks = <&clocks BCM2835_CLOCK_PCM>; @@ -1836,7 +1836,7 @@ Signed-off-by: Phil Elwell status = "disabled"; }; -@@ -414,8 +322,6 @@ +@@ -415,8 +323,6 @@ reg = <0x7e204000 0x200>; interrupts = <2 22>; clocks = <&clocks BCM2835_CLOCK_VPU>; @@ -1845,7 +1845,7 @@ Signed-off-by: Phil Elwell #address-cells = <1>; #size-cells = <0>; status = "disabled"; -@@ -541,32 +447,6 @@ +@@ -542,32 +448,6 @@ status = "disabled"; }; @@ -1878,7 +1878,7 @@ Signed-off-by: Phil Elwell i2c1: i2c@7e804000 { compatible = "brcm,bcm2835-i2c"; reg = <0x7e804000 0x1000>; -@@ -577,16 +457,6 @@ +@@ -578,16 +458,6 @@ status = "disabled"; }; @@ -1895,7 +1895,7 @@ Signed-off-by: Phil Elwell vec: vec@7e806000 { compatible = "brcm,bcm2835-vec"; reg = <0x7e806000 0x1000>; -@@ -595,20 +465,6 @@ +@@ -596,20 +466,6 @@ status = "disabled"; }; @@ -1916,7 +1916,7 @@ Signed-off-by: Phil Elwell usb: usb@7e980000 { compatible = "brcm,bcm2835-usb"; reg = <0x7e980000 0x10000>; -@@ -620,10 +476,6 @@ +@@ -621,10 +477,6 @@ phys = <&usbphy>; phy-names = "usb2-phy"; }; diff --git a/target/linux/bcm27xx/patches-5.4/950-0441-PCI-of-Add-inbound-resource-parsing-to-helpers.patch b/target/linux/bcm27xx/patches-5.4/950-0441-PCI-of-Add-inbound-resource-parsing-to-helpers.patch index 8f21837db7..f6e66da6d6 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0441-PCI-of-Add-inbound-resource-parsing-to-helpers.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0441-PCI-of-Add-inbound-resource-parsing-to-helpers.patch @@ -82,7 +82,7 @@ Cc: linux-rockchip@lists.infradead.org --- a/drivers/pci/controller/pci-aardvark.c +++ b/drivers/pci/controller/pci-aardvark.c -@@ -1523,7 +1523,8 @@ static int advk_pcie_probe(struct platfo +@@ -1525,7 +1525,8 @@ static int advk_pcie_probe(struct platfo return ret; } diff --git a/target/linux/bcm27xx/patches-5.4/950-0658-dt-Implement-an-I2C-pinctrl-mux-for-BSC0.patch b/target/linux/bcm27xx/patches-5.4/950-0658-dt-Implement-an-I2C-pinctrl-mux-for-BSC0.patch index 002ad8686e..4adbd3ab7c 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0658-dt-Implement-an-I2C-pinctrl-mux-for-BSC0.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0658-dt-Implement-an-I2C-pinctrl-mux-for-BSC0.patch @@ -392,7 +392,7 @@ Signed-off-by: Dave Stevenson +}; --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi -@@ -340,7 +340,7 @@ +@@ -341,7 +341,7 @@ status = "disabled"; }; @@ -401,7 +401,7 @@ Signed-off-by: Dave Stevenson compatible = "brcm,bcm2835-i2c"; reg = <0x7e205000 0x200>; interrupts = <2 21>; -@@ -350,6 +350,30 @@ +@@ -351,6 +351,30 @@ status = "disabled"; }; diff --git a/target/linux/bcm27xx/patches-5.4/950-0803-media-rcar-csi2-Negotiate-data-lanes-number.patch b/target/linux/bcm27xx/patches-5.4/950-0803-media-rcar-csi2-Negotiate-data-lanes-number.patch index def9ab09d5..f3b298de47 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0803-media-rcar-csi2-Negotiate-data-lanes-number.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0803-media-rcar-csi2-Negotiate-data-lanes-number.patch @@ -44,7 +44,7 @@ Signed-off-by: Jacopo Mondi if ((rcsi2_read(priv, PHCLM_REG) & PHCLM_STOPSTATECKL) && (rcsi2_read(priv, PHDLM_REG) & lane_mask) == lane_mask) -@@ -445,7 +447,8 @@ static int rcsi2_set_phypll(struct rcar_ +@@ -452,7 +454,8 @@ static int rcsi2_set_phypll(struct rcar_ return 0; } @@ -54,7 +54,7 @@ Signed-off-by: Jacopo Mondi { struct v4l2_subdev *source; struct v4l2_ctrl *ctrl; -@@ -470,15 +473,63 @@ static int rcsi2_calc_mbps(struct rcar_c +@@ -477,15 +480,63 @@ static int rcsi2_calc_mbps(struct rcar_c * bps = link_freq * 2 */ mbps = v4l2_ctrl_g_ctrl_int64(ctrl) * bpp; @@ -119,7 +119,7 @@ Signed-off-by: Jacopo Mondi unsigned int i; int mbps, ret; -@@ -522,10 +573,18 @@ static int rcsi2_start_receiver(struct r +@@ -529,10 +580,18 @@ static int rcsi2_start_receiver(struct r fld |= FLD_FLD_NUM(1); } @@ -140,7 +140,7 @@ Signed-off-by: Jacopo Mondi if (mbps < 0) return mbps; -@@ -572,7 +631,7 @@ static int rcsi2_start_receiver(struct r +@@ -579,7 +638,7 @@ static int rcsi2_start_receiver(struct r rcsi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ); rcsi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ | PHYCNT_RSTZ); @@ -149,7 +149,7 @@ Signed-off-by: Jacopo Mondi if (ret) return ret; -@@ -749,6 +808,7 @@ static int rcsi2_notify_bound(struct v4l +@@ -756,6 +815,7 @@ static int rcsi2_notify_bound(struct v4l } priv->remote = subdev; diff --git a/target/linux/bcm27xx/patches-5.4/950-0877-Bluetooth-hci_bcm-Add-compatible-string-for-BCM43540.patch b/target/linux/bcm27xx/patches-5.4/950-0877-Bluetooth-hci_bcm-Add-compatible-string-for-BCM43540.patch index f429b15a88..f42d990f75 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0877-Bluetooth-hci_bcm-Add-compatible-string-for-BCM43540.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0877-Bluetooth-hci_bcm-Add-compatible-string-for-BCM43540.patch @@ -18,7 +18,7 @@ Signed-off-by: Marcel Holtmann --- a/drivers/bluetooth/hci_bcm.c +++ b/drivers/bluetooth/hci_bcm.c -@@ -1427,6 +1427,7 @@ static const struct of_device_id bcm_blu +@@ -1432,6 +1432,7 @@ static const struct of_device_id bcm_blu { .compatible = "brcm,bcm4345c5" }, { .compatible = "brcm,bcm4330-bt" }, { .compatible = "brcm,bcm43438-bt" }, diff --git a/target/linux/bcm27xx/patches-5.4/950-0878-Bluetooth-btbcm-Add-entry-for-BCM4335A0-UART-bluetoo.patch b/target/linux/bcm27xx/patches-5.4/950-0878-Bluetooth-btbcm-Add-entry-for-BCM4335A0-UART-bluetoo.patch index e2ad19b677..9ddd761f07 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0878-Bluetooth-btbcm-Add-entry-for-BCM4335A0-UART-bluetoo.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0878-Bluetooth-btbcm-Add-entry-for-BCM4335A0-UART-bluetoo.patch @@ -48,7 +48,7 @@ Signed-off-by: Marcel Holtmann --- a/drivers/bluetooth/hci_bcm.c +++ b/drivers/bluetooth/hci_bcm.c -@@ -1428,6 +1428,7 @@ static const struct of_device_id bcm_blu +@@ -1433,6 +1433,7 @@ static const struct of_device_id bcm_blu { .compatible = "brcm,bcm4330-bt" }, { .compatible = "brcm,bcm43438-bt" }, { .compatible = "brcm,bcm43540-bt" }, diff --git a/target/linux/bcm27xx/patches-5.4/950-0879-Bluetooth-hci_bcm-Disallow-set_baudrate-for-BCM4354.patch b/target/linux/bcm27xx/patches-5.4/950-0879-Bluetooth-hci_bcm-Disallow-set_baudrate-for-BCM4354.patch index da8f37b3dd..5c4fe60ed4 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0879-Bluetooth-hci_bcm-Disallow-set_baudrate-for-BCM4354.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0879-Bluetooth-hci_bcm-Disallow-set_baudrate-for-BCM4354.patch @@ -76,7 +76,7 @@ Signed-off-by: Johan Hedberg else if (hu->proto->oper_speed) speed = hu->proto->oper_speed; else -@@ -1377,6 +1395,7 @@ static struct platform_driver bcm_driver +@@ -1382,6 +1400,7 @@ static struct platform_driver bcm_driver static int bcm_serdev_probe(struct serdev_device *serdev) { struct bcm_device *bcmdev; @@ -84,7 +84,7 @@ Signed-off-by: Johan Hedberg int err; bcmdev = devm_kzalloc(&serdev->dev, sizeof(*bcmdev), GFP_KERNEL); -@@ -1411,6 +1430,10 @@ static int bcm_serdev_probe(struct serde +@@ -1416,6 +1435,10 @@ static int bcm_serdev_probe(struct serde if (err) dev_err(&serdev->dev, "Failed to power down\n"); @@ -95,7 +95,7 @@ Signed-off-by: Johan Hedberg return hci_uart_register_device(&bcmdev->serdev_hu, &bcm_proto); } -@@ -1422,12 +1445,16 @@ static void bcm_serdev_remove(struct ser +@@ -1427,12 +1450,16 @@ static void bcm_serdev_remove(struct ser } #ifdef CONFIG_OF diff --git a/target/linux/bcm27xx/patches-5.4/950-0881-Bluetooth-hci_bcm-Support-pcm-params-in-dts.patch b/target/linux/bcm27xx/patches-5.4/950-0881-Bluetooth-hci_bcm-Support-pcm-params-in-dts.patch index fa2de56bfe..84f93dd3e6 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0881-Bluetooth-hci_bcm-Support-pcm-params-in-dts.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0881-Bluetooth-hci_bcm-Support-pcm-params-in-dts.patch @@ -52,9 +52,9 @@ Signed-off-by: Johan Hedberg return 0; } -@@ -1149,6 +1162,9 @@ static int bcm_probe(struct platform_dev - dev->dev = &pdev->dev; - dev->irq = platform_get_irq(pdev, 0); +@@ -1154,6 +1167,9 @@ static int bcm_probe(struct platform_dev + + dev->irq = ret; + /* Initialize routing field to an unused value */ + dev->pcm_int_params[0] = 0xff; @@ -62,7 +62,7 @@ Signed-off-by: Johan Hedberg if (has_acpi_companion(&pdev->dev)) { ret = bcm_acpi_probe(dev); if (ret) -@@ -1409,6 +1425,9 @@ static int bcm_serdev_probe(struct serde +@@ -1414,6 +1430,9 @@ static int bcm_serdev_probe(struct serde bcmdev->serdev_hu.serdev = serdev; serdev_device_set_drvdata(serdev, bcmdev); diff --git a/target/linux/bcm27xx/patches-5.4/950-0882-Bluetooth-hci_bcm-Drive-RTS-only-for-BCM43438.patch b/target/linux/bcm27xx/patches-5.4/950-0882-Bluetooth-hci_bcm-Drive-RTS-only-for-BCM43438.patch index 507f21ab66..e92d22239a 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0882-Bluetooth-hci_bcm-Drive-RTS-only-for-BCM43438.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0882-Bluetooth-hci_bcm-Drive-RTS-only-for-BCM43438.patch @@ -61,7 +61,7 @@ Signed-off-by: Marcel Holtmann if (err) goto err_unset_hu; } -@@ -1450,8 +1457,10 @@ static int bcm_serdev_probe(struct serde +@@ -1455,8 +1462,10 @@ static int bcm_serdev_probe(struct serde dev_err(&serdev->dev, "Failed to power down\n"); data = device_get_match_data(bcmdev->dev); @@ -73,7 +73,7 @@ Signed-off-by: Marcel Holtmann return hci_uart_register_device(&bcmdev->serdev_hu, &bcm_proto); } -@@ -1468,11 +1477,15 @@ static struct bcm_device_data bcm4354_de +@@ -1473,11 +1482,15 @@ static struct bcm_device_data bcm4354_de .no_early_set_baudrate = true, }; diff --git a/target/linux/bcm27xx/patches-5.4/950-0973-net-bcmgenet-Reset-RBUF-on-first-open.patch b/target/linux/bcm27xx/patches-5.4/950-0973-net-bcmgenet-Reset-RBUF-on-first-open.patch index 706244f5c8..6d513ee8c1 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0973-net-bcmgenet-Reset-RBUF-on-first-open.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0973-net-bcmgenet-Reset-RBUF-on-first-open.patch @@ -59,7 +59,7 @@ Signed-off-by: Phil Elwell /* Reinitialize TDMA and RDMA and SW housekeeping */ ret = bcmgenet_init_dma(priv); -@@ -3665,7 +3673,7 @@ static int bcmgenet_resume(struct device +@@ -3667,7 +3675,7 @@ static int bcmgenet_resume(struct device bcmgenet_power_up(priv, GENET_POWER_WOL_MAGIC); /* Disable RX/TX DMA and flush TX queues */ diff --git a/target/linux/bcm27xx/patches-5.4/950-1010-phy-broadcom-split-out-the-BCM54213PE-from-the-BCM54.patch b/target/linux/bcm27xx/patches-5.4/950-1010-phy-broadcom-split-out-the-BCM54213PE-from-the-BCM54.patch index cf376b909e..2bc8cf2e07 100644 --- a/target/linux/bcm27xx/patches-5.4/950-1010-phy-broadcom-split-out-the-BCM54213PE-from-the-BCM54.patch +++ b/target/linux/bcm27xx/patches-5.4/950-1010-phy-broadcom-split-out-the-BCM54213PE-from-the-BCM54.patch @@ -49,7 +49,7 @@ Signed-off-by: Jonathan Bell .phy_id = PHY_ID_BCM5461, .phy_id_mask = 0xfffffff0, .name = "Broadcom BCM5461", -@@ -753,7 +762,8 @@ module_phy_driver(broadcom_drivers); +@@ -754,7 +763,8 @@ module_phy_driver(broadcom_drivers); static struct mdio_device_id __maybe_unused broadcom_tbl[] = { { PHY_ID_BCM5411, 0xfffffff0 }, { PHY_ID_BCM5421, 0xfffffff0 }, diff --git a/target/linux/bcm63xx/patches-5.4/339-MIPS-BCM63XX-add-support-for-BCM63268.patch b/target/linux/bcm63xx/patches-5.4/339-MIPS-BCM63XX-add-support-for-BCM63268.patch index a61a96f569..ed70482bb0 100644 --- a/target/linux/bcm63xx/patches-5.4/339-MIPS-BCM63XX-add-support-for-BCM63268.patch +++ b/target/linux/bcm63xx/patches-5.4/339-MIPS-BCM63XX-add-support-for-BCM63268.patch @@ -107,7 +107,7 @@ Signed-off-by: Jonas Gorski } static struct clk clk_pcie = { -@@ -542,6 +556,21 @@ static struct clk_lookup bcm6368_clks[] +@@ -548,6 +562,21 @@ static struct clk_lookup bcm6368_clks[] CLKDEV_INIT(NULL, "ipsec", &clk_ipsec), }; @@ -129,7 +129,7 @@ Signed-off-by: Jonas Gorski #define HSSPI_PLL_HZ_6328 133333333 #define HSSPI_PLL_HZ_6362 400000000 -@@ -574,6 +603,10 @@ static int __init bcm63xx_clk_init(void) +@@ -580,6 +609,10 @@ static int __init bcm63xx_clk_init(void) case BCM6368_CPU_ID: clkdev_add_table(bcm6368_clks, ARRAY_SIZE(bcm6368_clks)); break; diff --git a/target/linux/bcm63xx/patches-5.4/341-MIPS-BCM63XX-add-support-for-BCM6318.patch b/target/linux/bcm63xx/patches-5.4/341-MIPS-BCM63XX-add-support-for-BCM6318.patch index 48b183ac3b..ac354a4787 100644 --- a/target/linux/bcm63xx/patches-5.4/341-MIPS-BCM63XX-add-support-for-BCM6318.patch +++ b/target/linux/bcm63xx/patches-5.4/341-MIPS-BCM63XX-add-support-for-BCM6318.patch @@ -57,7 +57,7 @@ Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318 mask = CKCTL_6328_HSSPI_EN; else if (BCMCPU_IS_6362()) mask = CKCTL_6362_HSSPI_EN; -@@ -450,6 +452,19 @@ static struct clk_lookup bcm3368_clks[] +@@ -456,6 +458,19 @@ static struct clk_lookup bcm3368_clks[] CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1), }; @@ -77,7 +77,7 @@ Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318 static struct clk_lookup bcm6328_clks[] = { /* fixed rate clocks */ CLKDEV_INIT(NULL, "periph", &clk_periph), -@@ -571,6 +586,7 @@ static struct clk_lookup bcm63268_clks[] +@@ -577,6 +592,7 @@ static struct clk_lookup bcm63268_clks[] CLKDEV_INIT(NULL, "pcie", &clk_pcie), }; @@ -85,7 +85,7 @@ Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318 #define HSSPI_PLL_HZ_6328 133333333 #define HSSPI_PLL_HZ_6362 400000000 -@@ -580,6 +596,10 @@ static int __init bcm63xx_clk_init(void) +@@ -586,6 +602,10 @@ static int __init bcm63xx_clk_init(void) case BCM3368_CPU_ID: clkdev_add_table(bcm3368_clks, ARRAY_SIZE(bcm3368_clks)); break; diff --git a/target/linux/bcm63xx/patches-5.4/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch b/target/linux/bcm63xx/patches-5.4/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch index 45d4b8487c..d6b1190b9d 100644 --- a/target/linux/bcm63xx/patches-5.4/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch +++ b/target/linux/bcm63xx/patches-5.4/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch @@ -9,7 +9,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree --- a/arch/mips/bcm63xx/clk.c +++ b/arch/mips/bcm63xx/clk.c -@@ -495,6 +495,8 @@ static struct clk_lookup bcm3368_clks[] +@@ -501,6 +501,8 @@ static struct clk_lookup bcm3368_clks[] CLKDEV_INIT(NULL, "periph", &clk_periph), CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), @@ -18,7 +18,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree /* gated clocks */ CLKDEV_INIT(NULL, "enet0", &clk_enet0), CLKDEV_INIT(NULL, "enet1", &clk_enet1), -@@ -511,7 +513,9 @@ static struct clk_lookup bcm6318_clks[] +@@ -517,7 +519,9 @@ static struct clk_lookup bcm6318_clks[] /* fixed rate clocks */ CLKDEV_INIT(NULL, "periph", &clk_periph), CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), @@ -28,7 +28,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree /* gated clocks */ CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), CLKDEV_INIT(NULL, "usbh", &clk_usbh), -@@ -525,7 +529,10 @@ static struct clk_lookup bcm6328_clks[] +@@ -531,7 +535,10 @@ static struct clk_lookup bcm6328_clks[] CLKDEV_INIT(NULL, "periph", &clk_periph), CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), @@ -39,7 +39,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree /* gated clocks */ CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), CLKDEV_INIT(NULL, "usbh", &clk_usbh), -@@ -538,6 +545,7 @@ static struct clk_lookup bcm6338_clks[] +@@ -544,6 +551,7 @@ static struct clk_lookup bcm6338_clks[] /* fixed rate clocks */ CLKDEV_INIT(NULL, "periph", &clk_periph), CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), @@ -47,7 +47,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree /* gated clocks */ CLKDEV_INIT(NULL, "enet0", &clk_enet0), CLKDEV_INIT(NULL, "enet1", &clk_enet1), -@@ -552,6 +560,7 @@ static struct clk_lookup bcm6345_clks[] +@@ -558,6 +566,7 @@ static struct clk_lookup bcm6345_clks[] /* fixed rate clocks */ CLKDEV_INIT(NULL, "periph", &clk_periph), CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), @@ -55,7 +55,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree /* gated clocks */ CLKDEV_INIT(NULL, "enet0", &clk_enet0), CLKDEV_INIT(NULL, "enet1", &clk_enet1), -@@ -566,6 +575,7 @@ static struct clk_lookup bcm6348_clks[] +@@ -572,6 +581,7 @@ static struct clk_lookup bcm6348_clks[] /* fixed rate clocks */ CLKDEV_INIT(NULL, "periph", &clk_periph), CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), @@ -63,7 +63,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree /* gated clocks */ CLKDEV_INIT(NULL, "enet0", &clk_enet0), CLKDEV_INIT(NULL, "enet1", &clk_enet1), -@@ -582,6 +592,8 @@ static struct clk_lookup bcm6358_clks[] +@@ -588,6 +598,8 @@ static struct clk_lookup bcm6358_clks[] CLKDEV_INIT(NULL, "periph", &clk_periph), CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), @@ -72,7 +72,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree /* gated clocks */ CLKDEV_INIT(NULL, "enet0", &clk_enet0), CLKDEV_INIT(NULL, "enet1", &clk_enet1), -@@ -601,7 +613,10 @@ static struct clk_lookup bcm6362_clks[] +@@ -607,7 +619,10 @@ static struct clk_lookup bcm6362_clks[] CLKDEV_INIT(NULL, "periph", &clk_periph), CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), @@ -83,7 +83,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree /* gated clocks */ CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), CLKDEV_INIT(NULL, "usbh", &clk_usbh), -@@ -617,6 +632,8 @@ static struct clk_lookup bcm6368_clks[] +@@ -623,6 +638,8 @@ static struct clk_lookup bcm6368_clks[] CLKDEV_INIT(NULL, "periph", &clk_periph), CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), @@ -92,7 +92,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree /* gated clocks */ CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), CLKDEV_INIT(NULL, "usbh", &clk_usbh), -@@ -631,7 +648,10 @@ static struct clk_lookup bcm63268_clks[] +@@ -637,7 +654,10 @@ static struct clk_lookup bcm63268_clks[] CLKDEV_INIT(NULL, "periph", &clk_periph), CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), diff --git a/target/linux/bcm63xx/patches-5.4/430-MIPS-BCM63XX-add-nand-clocks.patch b/target/linux/bcm63xx/patches-5.4/430-MIPS-BCM63XX-add-nand-clocks.patch index a8f70e3db3..a29c3b780b 100644 --- a/target/linux/bcm63xx/patches-5.4/430-MIPS-BCM63XX-add-nand-clocks.patch +++ b/target/linux/bcm63xx/patches-5.4/430-MIPS-BCM63XX-add-nand-clocks.patch @@ -24,7 +24,7 @@ * Internal peripheral clock */ static struct clk clk_periph = { -@@ -618,6 +635,7 @@ static struct clk_lookup bcm6362_clks[] +@@ -624,6 +641,7 @@ static struct clk_lookup bcm6362_clks[] CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll), CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll), /* gated clocks */ @@ -32,7 +32,7 @@ CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), CLKDEV_INIT(NULL, "usbh", &clk_usbh), CLKDEV_INIT(NULL, "usbd", &clk_usbd), -@@ -635,6 +653,7 @@ static struct clk_lookup bcm6368_clks[] +@@ -641,6 +659,7 @@ static struct clk_lookup bcm6368_clks[] CLKDEV_INIT("10000100.serial", "refclk", &clk_periph), CLKDEV_INIT("10000120.serial", "refclk", &clk_periph), /* gated clocks */ @@ -40,7 +40,7 @@ CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), CLKDEV_INIT(NULL, "usbh", &clk_usbh), CLKDEV_INIT(NULL, "usbd", &clk_usbd), -@@ -653,6 +672,7 @@ static struct clk_lookup bcm63268_clks[] +@@ -659,6 +678,7 @@ static struct clk_lookup bcm63268_clks[] CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll), CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll), /* gated clocks */ diff --git a/target/linux/generic/backport-5.4/716-v5.5-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch b/target/linux/generic/backport-5.4/716-v5.5-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch index 92fe224873..82c9fa53c2 100644 --- a/target/linux/generic/backport-5.4/716-v5.5-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch +++ b/target/linux/generic/backport-5.4/716-v5.5-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch @@ -16,7 +16,7 @@ Signed-off-by: Russell King --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c -@@ -565,26 +565,17 @@ static const struct sfp_upstream_ops sfp +@@ -565,31 +565,17 @@ static const struct sfp_upstream_ops sfp static int phylink_register_sfp(struct phylink *pl, struct fwnode_handle *fwnode) { @@ -42,6 +42,11 @@ Signed-off-by: Russell King return ret; } +- if (!fwnode_device_is_available(ref.fwnode)) { +- fwnode_handle_put(ref.fwnode); +- return 0; +- } +- - pl->sfp_bus = sfp_register_upstream(ref.fwnode, pl, &sfp_phylink_ops); - if (!pl->sfp_bus) - return -ENOMEM; @@ -59,7 +64,7 @@ Signed-off-by: Russell King #include #include -@@ -520,45 +521,63 @@ static void sfp_upstream_clear(struct sf +@@ -520,45 +521,68 @@ static void sfp_upstream_clear(struct sf } /** @@ -117,6 +122,11 @@ Signed-off-by: Russell King + else if (ret < 0) + return ERR_PTR(ret); + ++ if (!fwnode_device_is_available(ref.fwnode)) { ++ fwnode_handle_put(ref.fwnode); ++ return NULL; ++ } ++ + bus = sfp_bus_get(ref.fwnode); + fwnode_handle_put(ref.fwnode); + if (!bus) diff --git a/target/linux/generic/backport-5.4/717-v5.5-net-sfp-rework-upstream-interface.patch b/target/linux/generic/backport-5.4/717-v5.5-net-sfp-rework-upstream-interface.patch index 9175f2557a..907b9dc46e 100644 --- a/target/linux/generic/backport-5.4/717-v5.5-net-sfp-rework-upstream-interface.patch +++ b/target/linux/generic/backport-5.4/717-v5.5-net-sfp-rework-upstream-interface.patch @@ -117,7 +117,7 @@ Signed-off-by: Russell King { struct fwnode_reference_args ref; struct sfp_bus *bus; -@@ -557,7 +563,39 @@ struct sfp_bus *sfp_register_upstream_no +@@ -562,7 +568,39 @@ struct sfp_bus *sfp_register_upstream_no if (!bus) return ERR_PTR(-ENOMEM); @@ -157,7 +157,7 @@ Signed-off-by: Russell King bus->upstream_ops = ops; bus->upstream = upstream; -@@ -570,33 +608,33 @@ struct sfp_bus *sfp_register_upstream_no +@@ -575,33 +613,33 @@ struct sfp_bus *sfp_register_upstream_no } rtnl_unlock(); diff --git a/target/linux/generic/hack-5.4/902-debloat_proc.patch b/target/linux/generic/hack-5.4/902-debloat_proc.patch index 198b03768b..c680e7bc40 100644 --- a/target/linux/generic/hack-5.4/902-debloat_proc.patch +++ b/target/linux/generic/hack-5.4/902-debloat_proc.patch @@ -286,7 +286,7 @@ Signed-off-by: Felix Fietkau goto err; --- a/net/core/net-procfs.c +++ b/net/core/net-procfs.c -@@ -279,10 +279,12 @@ static int __net_init dev_proc_net_init( +@@ -309,10 +309,12 @@ static int __net_init dev_proc_net_init( if (!proc_create_net("dev", 0444, net->proc_net, &dev_seq_ops, sizeof(struct seq_net_private))) goto out; @@ -301,7 +301,7 @@ Signed-off-by: Felix Fietkau sizeof(struct seq_net_private))) goto out_softnet; -@@ -292,9 +294,11 @@ static int __net_init dev_proc_net_init( +@@ -322,9 +324,11 @@ static int __net_init dev_proc_net_init( out: return rc; out_ptype: @@ -315,7 +315,7 @@ Signed-off-by: Felix Fietkau out_dev: remove_proc_entry("dev", net->proc_net); goto out; -@@ -304,8 +308,10 @@ static void __net_exit dev_proc_net_exit +@@ -334,8 +338,10 @@ static void __net_exit dev_proc_net_exit { wext_proc_exit(net); diff --git a/target/linux/generic/pending-5.4/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch b/target/linux/generic/pending-5.4/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch index 6acb2dc386..09e8267034 100644 --- a/target/linux/generic/pending-5.4/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch +++ b/target/linux/generic/pending-5.4/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch @@ -71,7 +71,7 @@ Signed-off-by: Tobias Wolf --- a/mm/page_alloc.c +++ b/mm/page_alloc.c -@@ -6884,7 +6884,7 @@ static void __ref alloc_node_mem_map(str +@@ -6886,7 +6886,7 @@ static void __ref alloc_node_mem_map(str mem_map = NODE_DATA(0)->node_mem_map; #if defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP) || defined(CONFIG_FLATMEM) if (page_to_pfn(mem_map) != pgdat->node_start_pfn) diff --git a/target/linux/generic/pending-5.4/630-packet_socket_type.patch b/target/linux/generic/pending-5.4/630-packet_socket_type.patch index d9bfda1303..df1de5a6a3 100644 --- a/target/linux/generic/pending-5.4/630-packet_socket_type.patch +++ b/target/linux/generic/pending-5.4/630-packet_socket_type.patch @@ -30,7 +30,7 @@ Signed-off-by: Felix Fietkau #define PACKET_FANOUT_LB 1 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c -@@ -1797,6 +1797,7 @@ static int packet_rcv_spkt(struct sk_buf +@@ -1801,6 +1801,7 @@ static int packet_rcv_spkt(struct sk_buf { struct sock *sk; struct sockaddr_pkt *spkt; @@ -38,7 +38,7 @@ Signed-off-by: Felix Fietkau /* * When we registered the protocol we saved the socket in the data -@@ -1804,6 +1805,7 @@ static int packet_rcv_spkt(struct sk_buf +@@ -1808,6 +1809,7 @@ static int packet_rcv_spkt(struct sk_buf */ sk = pt->af_packet_priv; @@ -46,7 +46,7 @@ Signed-off-by: Felix Fietkau /* * Yank back the headers [hope the device set this -@@ -1816,7 +1818,7 @@ static int packet_rcv_spkt(struct sk_buf +@@ -1820,7 +1822,7 @@ static int packet_rcv_spkt(struct sk_buf * so that this procedure is noop. */ @@ -55,7 +55,7 @@ Signed-off-by: Felix Fietkau goto out; if (!net_eq(dev_net(dev), sock_net(sk))) -@@ -2054,12 +2056,12 @@ static int packet_rcv(struct sk_buff *sk +@@ -2058,12 +2060,12 @@ static int packet_rcv(struct sk_buff *sk unsigned int snaplen, res; bool is_drop_n_account = false; @@ -71,7 +71,7 @@ Signed-off-by: Felix Fietkau if (!net_eq(dev_net(dev), sock_net(sk))) goto drop; -@@ -2185,12 +2187,12 @@ static int tpacket_rcv(struct sk_buff *s +@@ -2189,12 +2191,12 @@ static int tpacket_rcv(struct sk_buff *s BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h2)) != 32); BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h3)) != 48); @@ -87,7 +87,7 @@ Signed-off-by: Felix Fietkau if (!net_eq(dev_net(dev), sock_net(sk))) goto drop; -@@ -3289,6 +3291,7 @@ static int packet_create(struct net *net +@@ -3293,6 +3295,7 @@ static int packet_create(struct net *net mutex_init(&po->pg_vec_lock); po->rollover = NULL; po->prot_hook.func = packet_rcv; @@ -95,7 +95,7 @@ Signed-off-by: Felix Fietkau if (sock->type == SOCK_PACKET) po->prot_hook.func = packet_rcv_spkt; -@@ -3924,6 +3927,16 @@ packet_setsockopt(struct socket *sock, i +@@ -3930,6 +3933,16 @@ packet_setsockopt(struct socket *sock, i po->xmit = val ? packet_direct_xmit : dev_queue_xmit; return 0; } @@ -112,7 +112,7 @@ Signed-off-by: Felix Fietkau default: return -ENOPROTOOPT; } -@@ -3980,6 +3993,13 @@ static int packet_getsockopt(struct sock +@@ -3986,6 +3999,13 @@ static int packet_getsockopt(struct sock case PACKET_VNET_HDR: val = po->has_vnet_hdr; break; diff --git a/target/linux/generic/pending-5.4/644-net-pppoe-support-hardware-flow-table-offload.patch b/target/linux/generic/pending-5.4/644-net-pppoe-support-hardware-flow-table-offload.patch index 1eb6a83337..b09b3bc5e8 100644 --- a/target/linux/generic/pending-5.4/644-net-pppoe-support-hardware-flow-table-offload.patch +++ b/target/linux/generic/pending-5.4/644-net-pppoe-support-hardware-flow-table-offload.patch @@ -21,7 +21,7 @@ Signed-off-by: Felix Fietkau #define PPP_VERSION "2.4.2" /* -@@ -1373,12 +1378,37 @@ static void ppp_dev_priv_destructor(stru +@@ -1378,12 +1383,37 @@ static void ppp_dev_priv_destructor(stru ppp_destroy_interface(ppp); } diff --git a/target/linux/generic/pending-5.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch b/target/linux/generic/pending-5.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch index d21258e590..82c1e26831 100644 --- a/target/linux/generic/pending-5.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch +++ b/target/linux/generic/pending-5.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch @@ -53,7 +53,7 @@ Signed-off-by: Jonas Gorski --- a/net/ipv4/fib_semantics.c +++ b/net/ipv4/fib_semantics.c -@@ -141,6 +141,10 @@ const struct fib_prop fib_props[RTN_MAX +@@ -142,6 +142,10 @@ const struct fib_prop fib_props[RTN_MAX .error = -EINVAL, .scope = RT_SCOPE_NOWHERE, }, diff --git a/target/linux/generic/pending-5.4/743-net-sfp-add-module-start-stop-upstream-notifications.patch b/target/linux/generic/pending-5.4/743-net-sfp-add-module-start-stop-upstream-notifications.patch index 3dc8f60020..ba1b5b5822 100644 --- a/target/linux/generic/pending-5.4/743-net-sfp-add-module-start-stop-upstream-notifications.patch +++ b/target/linux/generic/pending-5.4/743-net-sfp-add-module-start-stop-upstream-notifications.patch @@ -32,7 +32,7 @@ Signed-off-by: Russell King --- a/drivers/net/phy/sfp-bus.c +++ b/drivers/net/phy/sfp-bus.c -@@ -712,6 +712,27 @@ void sfp_module_remove(struct sfp_bus *b +@@ -717,6 +717,27 @@ void sfp_module_remove(struct sfp_bus *b } EXPORT_SYMBOL_GPL(sfp_module_remove); diff --git a/target/linux/ipq40xx/patches-5.4/302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch b/target/linux/ipq40xx/patches-5.4/302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch index 71618a40f2..27b0bef202 100644 --- a/target/linux/ipq40xx/patches-5.4/302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch +++ b/target/linux/ipq40xx/patches-5.4/302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch @@ -22,7 +22,7 @@ Signed-off-by: John Thomson --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S -@@ -599,6 +599,41 @@ not_relocated: mov r0, #0 +@@ -600,6 +600,41 @@ not_relocated: mov r0, #0 bic r4, r4, #1 blne cache_on diff --git a/target/linux/layerscape/patches-5.4/302-dts-0060-arm64-dts-ls1028a-add-flexspi-nodes.patch b/target/linux/layerscape/patches-5.4/302-dts-0060-arm64-dts-ls1028a-add-flexspi-nodes.patch index 3f7dc5bffc..84aa2390a8 100644 --- a/target/linux/layerscape/patches-5.4/302-dts-0060-arm64-dts-ls1028a-add-flexspi-nodes.patch +++ b/target/linux/layerscape/patches-5.4/302-dts-0060-arm64-dts-ls1028a-add-flexspi-nodes.patch @@ -18,7 +18,7 @@ Signed-off-by: Xiaowei Bao --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts -@@ -222,6 +222,21 @@ +@@ -226,6 +226,21 @@ phy-connection-type = "rgmii-id"; }; diff --git a/target/linux/layerscape/patches-5.4/302-dts-0073-arm64-ls1028aqds-Add-support-DP-nodes-for-LS1028AQDS.patch b/target/linux/layerscape/patches-5.4/302-dts-0073-arm64-ls1028aqds-Add-support-DP-nodes-for-LS1028AQDS.patch index e389a950d9..3ccd41f57c 100644 --- a/target/linux/layerscape/patches-5.4/302-dts-0073-arm64-ls1028aqds-Add-support-DP-nodes-for-LS1028AQDS.patch +++ b/target/linux/layerscape/patches-5.4/302-dts-0073-arm64-ls1028aqds-Add-support-DP-nodes-for-LS1028AQDS.patch @@ -13,7 +13,7 @@ Signed-off-by: Wen He --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts -@@ -244,3 +244,15 @@ +@@ -248,3 +248,15 @@ &sata { status = "okay"; }; diff --git a/target/linux/layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch b/target/linux/layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch deleted file mode 100644 index d97837722c..0000000000 --- a/target/linux/layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch +++ /dev/null @@ -1,42 +0,0 @@ -From d4c7270a63b1d78b89d91f74d782cce2a2bd9690 Mon Sep 17 00:00:00 2001 -From: Biwen Li -Date: Wed, 4 Sep 2019 11:39:30 +0800 -Subject: [PATCH] arm64: ls1028a-qds: correct bus of rtc - -The rtc is on i2c2 bus(hardware), not on i2c1 channel 3, -so correct it - -Signed-off-by: Biwen Li ---- - arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 13 ++++++++----- - 1 file changed, 8 insertions(+), 5 deletions(-) - ---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts -+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts -@@ -169,11 +169,6 @@ - vcc-supply = <&sb_3v3>; - }; - -- rtc@51 { -- compatible = "nxp,pcf2129"; -- reg = <0x51>; -- }; -- - eeprom@56 { - compatible = "atmel,24c512"; - reg = <0x56>; -@@ -217,6 +212,14 @@ - - }; - -+&i2c1 { -+ status = "okay"; -+ rtc@51 { -+ compatible = "nxp,pcf2129"; -+ reg = <0x51>; -+ }; -+}; -+ - &enetc_port1 { - phy-handle = <&qds_phy1>; - phy-connection-type = "rgmii-id"; diff --git a/target/linux/layerscape/patches-5.4/302-dts-0084-arm64-dts-ls1028a-define-networking-options-for-QDS.patch b/target/linux/layerscape/patches-5.4/302-dts-0084-arm64-dts-ls1028a-define-networking-options-for-QDS.patch index 68e8098b68..8680f3490b 100644 --- a/target/linux/layerscape/patches-5.4/302-dts-0084-arm64-dts-ls1028a-define-networking-options-for-QDS.patch +++ b/target/linux/layerscape/patches-5.4/302-dts-0084-arm64-dts-ls1028a-define-networking-options-for-QDS.patch @@ -346,7 +346,7 @@ Signed-off-by: Alex Marginean }; }; -@@ -259,3 +283,6 @@ +@@ -260,3 +284,6 @@ edp_num_lanes = <0x4>; status = "okay"; }; diff --git a/target/linux/layerscape/patches-5.4/302-dts-0092-arm64-dts-ls1028a-Add-DP-DT-nodes.patch b/target/linux/layerscape/patches-5.4/302-dts-0092-arm64-dts-ls1028a-Add-DP-DT-nodes.patch index a0fd27e350..c3b750ee8a 100644 --- a/target/linux/layerscape/patches-5.4/302-dts-0092-arm64-dts-ls1028a-Add-DP-DT-nodes.patch +++ b/target/linux/layerscape/patches-5.4/302-dts-0092-arm64-dts-ls1028a-Add-DP-DT-nodes.patch @@ -14,7 +14,7 @@ Signed-off-by: Wen He --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts -@@ -273,14 +273,7 @@ +@@ -274,14 +274,7 @@ }; &hdptx0 { diff --git a/target/linux/layerscape/patches-5.4/302-dts-0113-arm64-dts-fsl-ls1028a-qds-Add-overlays-for-various-s.patch b/target/linux/layerscape/patches-5.4/302-dts-0113-arm64-dts-fsl-ls1028a-qds-Add-overlays-for-various-s.patch index 0d1b23c85b..faa7c58bf1 100644 --- a/target/linux/layerscape/patches-5.4/302-dts-0113-arm64-dts-fsl-ls1028a-qds-Add-overlays-for-various-s.patch +++ b/target/linux/layerscape/patches-5.4/302-dts-0113-arm64-dts-fsl-ls1028a-qds-Add-overlays-for-various-s.patch @@ -884,7 +884,7 @@ Signed-off-by: Alex Marginean -}; --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts -@@ -276,6 +276,3 @@ +@@ -277,6 +277,3 @@ lane-mapping = <0x4e>; status = "okay"; }; diff --git a/target/linux/layerscape/patches-5.4/303-core-0003-cgroup-let-a-symlink-too-be-created-with-a-cftype-fi.patch b/target/linux/layerscape/patches-5.4/303-core-0003-cgroup-let-a-symlink-too-be-created-with-a-cftype-fi.patch index f7edb7411d..7f0579cb90 100644 --- a/target/linux/layerscape/patches-5.4/303-core-0003-cgroup-let-a-symlink-too-be-created-with-a-cftype-fi.patch +++ b/target/linux/layerscape/patches-5.4/303-core-0003-cgroup-let-a-symlink-too-be-created-with-a-cftype-fi.patch @@ -87,7 +87,7 @@ Signed-off-by: Li Yang } /** -@@ -3896,6 +3912,7 @@ static int cgroup_add_file(struct cgroup +@@ -3901,6 +3917,7 @@ static int cgroup_add_file(struct cgroup { char name[CGROUP_FILE_NAME_MAX]; struct kernfs_node *kn; @@ -95,7 +95,7 @@ Signed-off-by: Li Yang struct lock_class_key *key = NULL; int ret; -@@ -3926,6 +3943,14 @@ static int cgroup_add_file(struct cgroup +@@ -3931,6 +3948,14 @@ static int cgroup_add_file(struct cgroup spin_unlock_irq(&cgroup_file_kn_lock); } diff --git a/target/linux/layerscape/patches-5.4/303-core-0004-cgroup-bfq-revert-bfq.weight-symlink-change.patch b/target/linux/layerscape/patches-5.4/303-core-0004-cgroup-bfq-revert-bfq.weight-symlink-change.patch index 469bbfdffa..a7930e0e26 100644 --- a/target/linux/layerscape/patches-5.4/303-core-0004-cgroup-bfq-revert-bfq.weight-symlink-change.patch +++ b/target/linux/layerscape/patches-5.4/303-core-0004-cgroup-bfq-revert-bfq.weight-symlink-change.patch @@ -89,7 +89,7 @@ Signed-off-by: Li Yang } /** -@@ -3912,7 +3896,6 @@ static int cgroup_add_file(struct cgroup +@@ -3917,7 +3901,6 @@ static int cgroup_add_file(struct cgroup { char name[CGROUP_FILE_NAME_MAX]; struct kernfs_node *kn; @@ -97,7 +97,7 @@ Signed-off-by: Li Yang struct lock_class_key *key = NULL; int ret; -@@ -3943,14 +3926,6 @@ static int cgroup_add_file(struct cgroup +@@ -3948,14 +3931,6 @@ static int cgroup_add_file(struct cgroup spin_unlock_irq(&cgroup_file_kn_lock); } diff --git a/target/linux/layerscape/patches-5.4/801-audio-0008-Revert-ASoC-Remove-dev_err-usage-after-platform_get_.patch b/target/linux/layerscape/patches-5.4/801-audio-0008-Revert-ASoC-Remove-dev_err-usage-after-platform_get_.patch index 9e020c3c61..d261483563 100644 --- a/target/linux/layerscape/patches-5.4/801-audio-0008-Revert-ASoC-Remove-dev_err-usage-after-platform_get_.patch +++ b/target/linux/layerscape/patches-5.4/801-audio-0008-Revert-ASoC-Remove-dev_err-usage-after-platform_get_.patch @@ -439,7 +439,7 @@ This reverts commit cf9441adb1a35506d7606866c382b9d8614169b5. IRQF_SHARED, dev_name(dev), pdev); --- a/sound/soc/xilinx/xlnx_formatter_pcm.c +++ b/sound/soc/xilinx/xlnx_formatter_pcm.c -@@ -613,6 +613,7 @@ static int xlnx_formatter_pcm_probe(stru +@@ -634,6 +634,7 @@ static int xlnx_formatter_pcm_probe(stru aud_drv_data->mm2s_irq = platform_get_irq_byname(pdev, "irq_mm2s"); if (aud_drv_data->mm2s_irq < 0) { @@ -447,7 +447,7 @@ This reverts commit cf9441adb1a35506d7606866c382b9d8614169b5. ret = aud_drv_data->mm2s_irq; goto clk_err; } -@@ -639,6 +640,7 @@ static int xlnx_formatter_pcm_probe(stru +@@ -660,6 +661,7 @@ static int xlnx_formatter_pcm_probe(stru aud_drv_data->s2mm_irq = platform_get_irq_byname(pdev, "irq_s2mm"); if (aud_drv_data->s2mm_irq < 0) { diff --git a/target/linux/layerscape/patches-5.4/820-usb-0014-MLK-17380-3-usb-move-EH-SINGLE_STEP_SET_FEATURE-impl.patch b/target/linux/layerscape/patches-5.4/820-usb-0014-MLK-17380-3-usb-move-EH-SINGLE_STEP_SET_FEATURE-impl.patch index f5bf467154..8a67488dd9 100644 --- a/target/linux/layerscape/patches-5.4/820-usb-0014-MLK-17380-3-usb-move-EH-SINGLE_STEP_SET_FEATURE-impl.patch +++ b/target/linux/layerscape/patches-5.4/820-usb-0014-MLK-17380-3-usb-move-EH-SINGLE_STEP_SET_FEATURE-impl.patch @@ -20,7 +20,7 @@ Signed-off-by: Peter Chen --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c -@@ -2104,6 +2104,140 @@ int usb_hcd_get_frame_number (struct usb +@@ -2125,6 +2125,140 @@ int usb_hcd_get_frame_number (struct usb } /*-------------------------------------------------------------------------*/ diff --git a/target/linux/layerscape/patches-5.4/820-usb-0019-MLK-9829-usb-core-print-suggested-message-if-failed-.patch b/target/linux/layerscape/patches-5.4/820-usb-0019-MLK-9829-usb-core-print-suggested-message-if-failed-.patch index 6111197263..16e4e7e68c 100644 --- a/target/linux/layerscape/patches-5.4/820-usb-0019-MLK-9829-usb-core-print-suggested-message-if-failed-.patch +++ b/target/linux/layerscape/patches-5.4/820-usb-0019-MLK-9829-usb-core-print-suggested-message-if-failed-.patch @@ -20,7 +20,7 @@ Signed-off-by: Li Jun --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c -@@ -4777,7 +4777,8 @@ hub_port_init(struct usb_hub *hub, struc +@@ -4780,7 +4780,8 @@ hub_port_init(struct usb_hub *hub, struc } if (r) { if (r != -ENODEV) diff --git a/target/linux/mediatek/patches-5.4/0600-net-phylink-propagate-resolved-link-config-via-mac_l.patch b/target/linux/mediatek/patches-5.4/0600-net-phylink-propagate-resolved-link-config-via-mac_l.patch index 38bb9ca46d..13a9a51e34 100644 --- a/target/linux/mediatek/patches-5.4/0600-net-phylink-propagate-resolved-link-config-via-mac_l.patch +++ b/target/linux/mediatek/patches-5.4/0600-net-phylink-propagate-resolved-link-config-via-mac_l.patch @@ -141,7 +141,7 @@ Signed-off-by: David S. Miller --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c -@@ -1499,9 +1499,10 @@ static void axienet_mac_link_down(struct +@@ -1501,9 +1501,10 @@ static void axienet_mac_link_down(struct } static void axienet_mac_link_up(struct phylink_config *config, diff --git a/target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch b/target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch index 525d9ec794..3d88a9e417 100644 --- a/target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch +++ b/target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch @@ -76,7 +76,7 @@ Cc: Miquèl Raynal /* Set to Direct mode */ reg = advk_readl(pcie, CTRL_CONFIG_REG); reg &= ~(CTRL_MODE_MASK << CTRL_MODE_SHIFT); -@@ -1493,6 +1502,62 @@ out_release_res: +@@ -1495,6 +1504,62 @@ out_release_res: return err; } @@ -139,7 +139,7 @@ Cc: Miquèl Raynal static int advk_pcie_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; -@@ -1625,6 +1690,10 @@ static int advk_pcie_probe(struct platfo +@@ -1627,6 +1692,10 @@ static int advk_pcie_probe(struct platfo else pcie->link_gen = ret; diff --git a/target/linux/mvebu/patches-5.4/026-PCI-aardvark-Fix-initialization-with-old-Marvell-s-A.patch b/target/linux/mvebu/patches-5.4/026-PCI-aardvark-Fix-initialization-with-old-Marvell-s-A.patch index 5a6173a666..cab99ce4ce 100644 --- a/target/linux/mvebu/patches-5.4/026-PCI-aardvark-Fix-initialization-with-old-Marvell-s-A.patch +++ b/target/linux/mvebu/patches-5.4/026-PCI-aardvark-Fix-initialization-with-old-Marvell-s-A.patch @@ -31,7 +31,7 @@ Cc: # 5.8+: ea17a0f153af: phy: marvell: comphy: Convert --- a/drivers/pci/controller/pci-aardvark.c +++ b/drivers/pci/controller/pci-aardvark.c -@@ -1526,7 +1526,9 @@ static int advk_pcie_enable_phy(struct a +@@ -1528,7 +1528,9 @@ static int advk_pcie_enable_phy(struct a } ret = phy_power_on(pcie->phy); diff --git a/target/linux/mvebu/patches-5.4/801-pci-mvebu-time-out-reset-on-link-up.patch b/target/linux/mvebu/patches-5.4/801-pci-mvebu-time-out-reset-on-link-up.patch index 49ea3de0d1..247c6b8273 100644 --- a/target/linux/mvebu/patches-5.4/801-pci-mvebu-time-out-reset-on-link-up.patch +++ b/target/linux/mvebu/patches-5.4/801-pci-mvebu-time-out-reset-on-link-up.patch @@ -13,7 +13,7 @@ Signed-off-by: Russell King --- a/drivers/pci/controller/pci-mvebu.c +++ b/drivers/pci/controller/pci-mvebu.c -@@ -936,6 +936,7 @@ static int mvebu_pcie_powerup(struct mve +@@ -944,6 +944,7 @@ static int mvebu_pcie_powerup(struct mve if (port->reset_gpio) { u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000; @@ -21,7 +21,7 @@ Signed-off-by: Russell King of_property_read_u32(port->dn, "reset-delay-us", &reset_udelay); -@@ -943,7 +944,13 @@ static int mvebu_pcie_powerup(struct mve +@@ -951,7 +952,13 @@ static int mvebu_pcie_powerup(struct mve udelay(100); gpiod_set_value_cansleep(port->reset_gpio, 0); @@ -36,7 +36,7 @@ Signed-off-by: Russell King } return 0; -@@ -1107,15 +1114,16 @@ static int mvebu_pcie_probe(struct platf +@@ -1115,15 +1122,16 @@ static int mvebu_pcie_probe(struct platf if (!child) continue; diff --git a/target/linux/octeon/patches-5.4/130-itus_shield_support.patch b/target/linux/octeon/patches-5.4/130-itus_shield_support.patch index 37c75bbcd1..15f514209d 100644 --- a/target/linux/octeon/patches-5.4/130-itus_shield_support.patch +++ b/target/linux/octeon/patches-5.4/130-itus_shield_support.patch @@ -20,7 +20,7 @@ } --- a/arch/mips/cavium-octeon/octeon-platform.c +++ b/arch/mips/cavium-octeon/octeon-platform.c -@@ -771,7 +771,7 @@ int __init octeon_prune_device_tree(void +@@ -773,7 +773,7 @@ int __init octeon_prune_device_tree(void if (fdt_check_header(initial_boot_params)) panic("Corrupt Device Tree."); diff --git a/target/linux/octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch b/target/linux/octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch index 1206561fda..8b7285abdf 100644 --- a/target/linux/octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch +++ b/target/linux/octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch @@ -22,7 +22,7 @@ Signed-off-by: Tim Harvey #include #include #include -@@ -5790,3 +5791,34 @@ static void nvidia_ion_ahci_fixup(struct +@@ -5793,3 +5794,34 @@ static void nvidia_ion_ahci_fixup(struct pdev->dev_flags |= PCI_DEV_FLAGS_HAS_MSI_MASKING; } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0ab8, nvidia_ion_ahci_fixup); diff --git a/target/linux/ramips/patches-5.4/0031-uvc-add-iPassion-iP2970-support.patch b/target/linux/ramips/patches-5.4/0031-uvc-add-iPassion-iP2970-support.patch index f088babc4e..a6c9127601 100644 --- a/target/linux/ramips/patches-5.4/0031-uvc-add-iPassion-iP2970-support.patch +++ b/target/linux/ramips/patches-5.4/0031-uvc-add-iPassion-iP2970-support.patch @@ -13,7 +13,7 @@ Signed-off-by: John Crispin --- a/drivers/media/usb/uvc/uvc_driver.c +++ b/drivers/media/usb/uvc/uvc_driver.c -@@ -2916,6 +2916,18 @@ static const struct usb_device_id uvc_id +@@ -2911,6 +2911,18 @@ static const struct usb_device_id uvc_id .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_INFO_META(V4L2_META_FMT_D4XX) }, diff --git a/target/linux/x86/patches-5.4/200-pcengines-apu2-reboot.patch b/target/linux/x86/patches-5.4/200-pcengines-apu2-reboot.patch index d6f11ac935..4a3f80623b 100644 --- a/target/linux/x86/patches-5.4/200-pcengines-apu2-reboot.patch +++ b/target/linux/x86/patches-5.4/200-pcengines-apu2-reboot.patch @@ -1,6 +1,6 @@ --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c -@@ -487,6 +487,16 @@ static const struct dmi_system_id reboot +@@ -479,6 +479,16 @@ static const struct dmi_system_id reboot }, },