mediatek: filogic: add support for Edgecore EAP111
HW specifications: * Mediatek MT7981A * 256MB SPI-NAND * 512MB DRAM * Uplink: 1 x 10/100/1000Base-T Ethernet, Auto MDIX, RJ-45 with 802.3at PoE (Built-in GBe PHY) * LAN: 1 x 10/100/1000Base-T Ethernet, Auto MDIX, RJ-45 (Airoha EN8801SC) * 1 Tricolor LED * Reset button * 12V/2.0A DC input Installation: Board comes with OpenWifi/TIP which is OpenWrt based, so sysupgrade can be used directly over SSH. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
This commit is contained in:
Robert Marko
parent
2dba4308d1
commit
923d7c5531
|
|
@ -68,6 +68,7 @@ comfast,cf-e393ax)
|
|||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x80000"
|
||||
;;
|
||||
cetron,ct3003|\
|
||||
edgecore,eap111|\
|
||||
netgear,wax220|\
|
||||
zbtlink,zbt-z8102ax|\
|
||||
zbtlink,zbt-z8103ax)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,201 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include "mt7981.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Edgecore EAP111";
|
||||
compatible = "edgecore,eap111", "mediatek,mt7981";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
led-boot = &led_green;
|
||||
led-failsafe = &led_green;
|
||||
led-running = &led_green;
|
||||
led-upgrade = &led_green;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs-override = "console=ttyS0,115200n8";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_green: led-green {
|
||||
gpios = <&pio 9 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
};
|
||||
|
||||
led_orange: led-orange {
|
||||
gpios = <&pio 34 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_ORANGE>;
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
};
|
||||
|
||||
led_blue: led-blue {
|
||||
gpios = <&pio 35 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pio {
|
||||
spi0_flash_pins: spi0-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spi0", "spi0_wp_hold";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_flash_pins>;
|
||||
cs-gpios = <0>, <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "spi-nand";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <52000000>;
|
||||
|
||||
spi-cal-enable;
|
||||
spi-cal-mode = "read-data";
|
||||
spi-cal-datalen = <7>;
|
||||
spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>;
|
||||
spi-cal-addrlen = <5>;
|
||||
spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;
|
||||
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
mediatek,nmbm;
|
||||
mediatek,bmt-max-ratio = <1>;
|
||||
mediatek,bmt-max-reserved-blocks = <64>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "BL2";
|
||||
reg = <0x00000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x100000 0x80000>;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "Factory";
|
||||
reg = <0x180000 0x200000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eeprom_factory: eeprom@0 {
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
|
||||
macaddr_wan: macaddr@2a {
|
||||
reg = <0x2a 0x6>;
|
||||
};
|
||||
|
||||
macaddr_lan: macaddr@24 {
|
||||
reg = <0x24 0x6>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@380000 {
|
||||
label = "FIP";
|
||||
reg = <0x380000 0x200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@580000 {
|
||||
label = "ubi";
|
||||
reg = <0x580000 0x4000000>;
|
||||
compatible = "linux,ubi";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio_bus {
|
||||
reset-gpios = <&pio 39 GPIO_ACTIVE_LOW>;
|
||||
reset-delay-us = <10000>;
|
||||
reset-post-delay-us = <10000>;
|
||||
|
||||
en8801sc: ethernet-phy@24 {
|
||||
reg = <24>;
|
||||
compatible = "ethernet-phy-id03a2.9471";
|
||||
phy-mode = "sgmii";
|
||||
};
|
||||
};
|
||||
|
||||
ð {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
status = "okay";
|
||||
|
||||
gmac0: mac@0 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <0>;
|
||||
phy-mode = "sgmii";
|
||||
phy-handle = <&en8801sc>;
|
||||
managed = "in-band-status";
|
||||
nvmem-cells = <&macaddr_lan>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
gmac1: mac@1 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
phy-mode = "gmii";
|
||||
phy-handle = <&int_gbe_phy>;
|
||||
nvmem-cells = <&macaddr_wan>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
};
|
||||
|
||||
&wifi {
|
||||
nvmem-cells = <&eeprom_factory>;
|
||||
nvmem-cell-names = "eeprom";
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -37,7 +37,8 @@ mediatek_setup_interfaces()
|
|||
bananapi,bpi-r3)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 sfp2" "eth1 wan"
|
||||
;;
|
||||
bananapi,bpi-r3-mini)
|
||||
bananapi,bpi-r3-mini|\
|
||||
edgecore,eap111)
|
||||
ucidef_set_interfaces_lan_wan eth0 eth1
|
||||
;;
|
||||
bananapi,bpi-r4)
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
CONFIG_64BIT=y
|
||||
# CONFIG_AHCI_MTK is not set
|
||||
# CONFIG_AIROHA_EN8801SC_PHY is not set
|
||||
CONFIG_AIROHA_EN8801SC_PHY=y
|
||||
CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
|
||||
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
|
||||
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
CONFIG_64BIT=y
|
||||
# CONFIG_AHCI_MTK is not set
|
||||
# CONFIG_AIROHA_EN8801SC_PHY is not set
|
||||
CONFIG_AIROHA_EN8801SC_PHY=y
|
||||
CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
|
||||
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
|
||||
CONFIG_ARCH_DEFAULT_KEXEC_IMAGE_VERIFY_SIG=y
|
||||
|
|
|
|||
|
|
@ -506,6 +506,24 @@ define Device/dlink_aquila-pro-ai-m30-a1
|
|||
endef
|
||||
TARGET_DEVICES += dlink_aquila-pro-ai-m30-a1
|
||||
|
||||
define Device/edgecore_eap111
|
||||
DEVICE_VENDOR := Edgecore
|
||||
DEVICE_MODEL := EAP111
|
||||
DEVICE_DTS := mt7981a-edgecore-eap111
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
DEVICE_DTS_LOADADDR := 0x47000000
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
UBINIZE_OPTS := -E 5
|
||||
KERNEL_IN_UBI := 1
|
||||
IMAGE_SIZE := 65536k
|
||||
IMAGES := sysupgrade.bin factory.bin
|
||||
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
|
||||
endef
|
||||
TARGET_DEVICES += edgecore_eap111
|
||||
|
||||
define Device/glinet_gl-mt2500
|
||||
DEVICE_VENDOR := GL.iNet
|
||||
DEVICE_MODEL := GL-MT2500
|
||||
|
|
|
|||
Loading…
Reference in New Issue