ar71xx: add ew-balin platform from Embedded Wireless

Add the Embedded Wireless "Balin" platform
 SoC: QCA AR9344 or AR9350
 RAM: DDR2-RAM 64MBytes
 Flash: SPI-NOR 16MBytes
 WLAN: 2 x 2 MIMO 2.4 & 5 GHz IEEE802.11 a/b/g/n
 Ethernet: 3 x 10/100 Mb/s
 USB: 1 x USB2.0 Host/Device bootstrap-pin at power-up
 PCI-Express: 1 x lane PCIe 1.2
 UART: 1 x Normal, 1 x High-Speed
 JTAG: 1 x EJTAG
 GPIO: 10 x Input/Output multiplexed

The module comes already with the current vanilla OpenWrt firmware.
To update, use "sysupgrade" image directly in vendor firmware.

Signed-off-by: Catrinel Catrinescu <cc@80211.de>
This commit is contained in:
Catrinel Catrinescu 2018-01-15 16:45:16 +01:00 committed by Felix Fietkau
parent ad4232e3e9
commit 4ba2dd130a
12 changed files with 148 additions and 0 deletions

View File

@ -372,6 +372,12 @@ ar71xx_setup_interfaces()
ucidef_add_switch "switch0" \ ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
;; ;;
ew-balin)
# usb0 is RNDIS interface over USB in device mode
ucidef_set_interface_raw "usb2" "usb0" "static"
ucidef_add_switch "switch0" \
"0@eth0" "5:lan:4" "4:lan:5" "3:wan"
;;
ew-dorin) ew-dorin)
ucidef_add_switch "switch0" \ ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:wan" "0@eth0" "1:lan" "2:lan" "3:wan"

View File

@ -199,6 +199,9 @@ get_status_led() {
el-mini) el-mini)
status_led="easylink:green:system" status_led="easylink:green:system"
;; ;;
ew-balin)
status_led="balin:green:status"
;;
ew-dorin|\ ew-dorin|\
ew-dorin-router) ew-dorin-router)
status_led="dorin:green:status" status_led="dorin:green:status"

View File

@ -643,6 +643,9 @@ ar71xx_board_detect() {
*"EL-MINI") *"EL-MINI")
name="el-mini" name="el-mini"
;; ;;
*"EmbWir-Balin")
name="ew-balin"
;;
*"EmbWir-Dorin") *"EmbWir-Dorin")
name="ew-dorin" name="ew-dorin"
;; ;;

View File

@ -237,6 +237,7 @@ platform_check_image() {
epg5000|\ epg5000|\
esr1750|\ esr1750|\
esr900|\ esr900|\
ew-balin|\
ew-dorin|\ ew-dorin|\
ew-dorin-router|\ ew-dorin-router|\
gl-ar150|\ gl-ar150|\

View File

@ -108,6 +108,7 @@ CONFIG_ATH79=y
# CONFIG_ATH79_MACH_EPG5000 is not set # CONFIG_ATH79_MACH_EPG5000 is not set
# CONFIG_ATH79_MACH_ESR1750 is not set # CONFIG_ATH79_MACH_ESR1750 is not set
# CONFIG_ATH79_MACH_ESR900 is not set # CONFIG_ATH79_MACH_ESR900 is not set
# CONFIG_ATH79_MACH_EW_BALIN is not set
# CONFIG_ATH79_MACH_EW_DORIN is not set # CONFIG_ATH79_MACH_EW_DORIN is not set
# CONFIG_ATH79_MACH_F9K1115V2 is not set # CONFIG_ATH79_MACH_F9K1115V2 is not set
# CONFIG_ATH79_MACH_FRITZ300E is not set # CONFIG_ATH79_MACH_FRITZ300E is not set

View File

@ -106,6 +106,7 @@ CONFIG_ATH79=y
# CONFIG_ATH79_MACH_EPG5000 is not set # CONFIG_ATH79_MACH_EPG5000 is not set
# CONFIG_ATH79_MACH_ESR1750 is not set # CONFIG_ATH79_MACH_ESR1750 is not set
# CONFIG_ATH79_MACH_ESR900 is not set # CONFIG_ATH79_MACH_ESR900 is not set
# CONFIG_ATH79_MACH_EW_BALIN is not set
# CONFIG_ATH79_MACH_EW_DORIN is not set # CONFIG_ATH79_MACH_EW_DORIN is not set
# CONFIG_ATH79_MACH_F9K1115V2 is not set # CONFIG_ATH79_MACH_F9K1115V2 is not set
# CONFIG_ATH79_MACH_FRITZ300E is not set # CONFIG_ATH79_MACH_FRITZ300E is not set

View File

@ -711,6 +711,17 @@ config ATH79_MACH_ESR900
select ATH79_DEV_WMAC select ATH79_DEV_WMAC
select ATH79_NVRAM select ATH79_NVRAM
config ATH79_MACH_EW_BALIN
bool "embedded wireless Balin Platform support"
select SOC_AR934X
select ATH79_DEV_M25P80
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_WMAC
select ATH79_DEV_ETH
select ATH79_DEV_USB
select ATH79_DEV_AP9X_PCI if PCI
config ATH79_MACH_EW_DORIN config ATH79_MACH_EW_DORIN
bool "embedded wireless Dorin Platform support" bool "embedded wireless Dorin Platform support"
select SOC_AR933X select SOC_AR933X

View File

@ -116,6 +116,7 @@ obj-$(CONFIG_ATH79_MACH_ENS202EXT) += mach-ens202ext.o
obj-$(CONFIG_ATH79_MACH_EPG5000) += mach-epg5000.o obj-$(CONFIG_ATH79_MACH_EPG5000) += mach-epg5000.o
obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o
obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o
obj-$(CONFIG_ATH79_MACH_EW_BALIN) += mach-ew-balin.o
obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o
obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o
obj-$(CONFIG_ATH79_MACH_FRITZ300E) += mach-fritz300e.o obj-$(CONFIG_ATH79_MACH_FRITZ300E) += mach-fritz300e.o

View File

@ -0,0 +1,110 @@
/*
* EW Balin board support
* (based on Atheros DB120 reference board support)
*
* Copyright (c) 2011 Qualcomm Atheros
* Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2017 Embedded Wireless GmbH www.80211.de
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include <linux/pci.h>
#include <linux/phy.h>
#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
#include <linux/ar8216_platform.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-spi.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"
#include "pci.h"
#define BALIN_GPIO_LED_STATUS 14
#define BALIN_GPIO_BTN_WPS 18
#define BALIN_KEYS_POLL_INTERVAL 20 /* msecs */
#define BALIN_KEYS_DEBOUNCE_INTERVAL (3 * BALIN_KEYS_POLL_INTERVAL)
#define BALIN_CALDATA_OFFSET 0x1000
#define BALIN_WMAC_MAC_OFFSET (BALIN_CALDATA_OFFSET + 0x02)
static struct gpio_led balin_leds_gpio[] __initdata = {
{
.name = "balin:green:status",
.gpio = BALIN_GPIO_LED_STATUS,
.active_low = 1,
},
};
static struct gpio_keys_button balin_gpio_keys[] __initdata = {
{
.desc = "WPS button",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = BALIN_KEYS_DEBOUNCE_INTERVAL,
.gpio = BALIN_GPIO_BTN_WPS,
.active_low = 0,
},
};
static void __init balin_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
static u8 mac[6];
ath79_register_m25p80(NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(balin_leds_gpio),
balin_leds_gpio);
ath79_register_gpio_keys_polled(-1, BALIN_KEYS_POLL_INTERVAL,
ARRAY_SIZE(balin_gpio_keys),
balin_gpio_keys);
ath79_register_usb();
ath79_register_wmac(art + BALIN_CALDATA_OFFSET, NULL);
ath79_register_pci();
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
AR934X_ETH_CFG_SW_ONLY_MODE);
ath79_register_mdio(1, 0x0);
/* GMAC1 is connected to the internal switch */
memcpy(mac, art + BALIN_WMAC_MAC_OFFSET, sizeof(mac));
mac[3] |= 0x40;
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_register_eth(1);
}
MIPS_MACHINE(ATH79_MACH_EW_BALIN, "EW-BALIN", "EmbWir-Balin",
balin_setup);

View File

@ -107,6 +107,7 @@ enum ath79_mach_type {
ATH79_MACH_EPG5000, /* EnGenius EPG5000 */ ATH79_MACH_EPG5000, /* EnGenius EPG5000 */
ATH79_MACH_ESR1750, /* EnGenius ESR1750 */ ATH79_MACH_ESR1750, /* EnGenius ESR1750 */
ATH79_MACH_ESR900, /* EnGenius ESR900 */ ATH79_MACH_ESR900, /* EnGenius ESR900 */
ATH79_MACH_EW_BALIN, /* embedded wireless Balin Platform */
ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */ ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */
ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */ ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */
ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */ ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */

View File

@ -79,6 +79,7 @@ CONFIG_ATH79_MACH_ENS202EXT=y
CONFIG_ATH79_MACH_EPG5000=y CONFIG_ATH79_MACH_EPG5000=y
CONFIG_ATH79_MACH_ESR1750=y CONFIG_ATH79_MACH_ESR1750=y
CONFIG_ATH79_MACH_ESR900=y CONFIG_ATH79_MACH_ESR900=y
CONFIG_ATH79_MACH_EW_BALIN=y
CONFIG_ATH79_MACH_EW_DORIN=y CONFIG_ATH79_MACH_EW_DORIN=y
CONFIG_ATH79_MACH_F9K1115V2=y CONFIG_ATH79_MACH_F9K1115V2=y
CONFIG_ATH79_MACH_FRITZ300E=y CONFIG_ATH79_MACH_FRITZ300E=y

View File

@ -272,6 +272,15 @@ define Device/dragino2
endef endef
TARGET_DEVICES += dragino2 TARGET_DEVICES += dragino2
define Device/ew-balin
DEVICE_TITLE := Embedded Wireless Balin Platform
DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea
BOARDNAME = EW-BALIN
IMAGE_SIZE = 16000k
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += ew-balin
define Device/ew-dorin define Device/ew-dorin
DEVICE_TITLE := Embedded Wireless Dorin Platform DEVICE_TITLE := Embedded Wireless Dorin Platform
DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea