From 4ba2dd130a9dbec584d1b4616d00b28237d8777c Mon Sep 17 00:00:00 2001 From: Catrinel Catrinescu Date: Mon, 15 Jan 2018 16:45:16 +0100 Subject: [PATCH] ar71xx: add ew-balin platform from Embedded Wireless Add the Embedded Wireless "Balin" platform SoC: QCA AR9344 or AR9350 RAM: DDR2-RAM 64MBytes Flash: SPI-NOR 16MBytes WLAN: 2 x 2 MIMO 2.4 & 5 GHz IEEE802.11 a/b/g/n Ethernet: 3 x 10/100 Mb/s USB: 1 x USB2.0 Host/Device bootstrap-pin at power-up PCI-Express: 1 x lane PCIe 1.2 UART: 1 x Normal, 1 x High-Speed JTAG: 1 x EJTAG GPIO: 10 x Input/Output multiplexed The module comes already with the current vanilla OpenWrt firmware. To update, use "sysupgrade" image directly in vendor firmware. Signed-off-by: Catrinel Catrinescu --- .../ar71xx/base-files/etc/board.d/02_network | 6 + target/linux/ar71xx/base-files/etc/diag.sh | 3 + target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 + .../ar71xx/base-files/lib/upgrade/platform.sh | 1 + target/linux/ar71xx/config-4.4 | 1 + target/linux/ar71xx/config-4.9 | 1 + .../files/arch/mips/ath79/Kconfig.openwrt | 11 ++ .../ar71xx/files/arch/mips/ath79/Makefile | 1 + .../files/arch/mips/ath79/mach-ew-balin.c | 110 ++++++++++++++++++ .../ar71xx/files/arch/mips/ath79/machtypes.h | 1 + target/linux/ar71xx/generic/config-default | 1 + target/linux/ar71xx/image/generic.mk | 9 ++ 12 files changed, 148 insertions(+) create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index b0755c44dd..02eb94691c 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -372,6 +372,12 @@ ar71xx_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" ;; + ew-balin) +# usb0 is RNDIS interface over USB in device mode + ucidef_set_interface_raw "usb2" "usb0" "static" + ucidef_add_switch "switch0" \ + "0@eth0" "5:lan:4" "4:lan:5" "3:wan" + ;; ew-dorin) ucidef_add_switch "switch0" \ "0@eth0" "1:lan" "2:lan" "3:wan" diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 4f4a73ce06..600ff551b2 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -199,6 +199,9 @@ get_status_led() { el-mini) status_led="easylink:green:system" ;; + ew-balin) + status_led="balin:green:status" + ;; ew-dorin|\ ew-dorin-router) status_led="dorin:green:status" diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 73bdce5853..2a793723d9 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -643,6 +643,9 @@ ar71xx_board_detect() { *"EL-MINI") name="el-mini" ;; + *"EmbWir-Balin") + name="ew-balin" + ;; *"EmbWir-Dorin") name="ew-dorin" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 1f9ed76fc3..28f04e53d7 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -237,6 +237,7 @@ platform_check_image() { epg5000|\ esr1750|\ esr900|\ + ew-balin|\ ew-dorin|\ ew-dorin-router|\ gl-ar150|\ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index 8ecf7e1355..4a8024b9a5 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -108,6 +108,7 @@ CONFIG_ATH79=y # CONFIG_ATH79_MACH_EPG5000 is not set # CONFIG_ATH79_MACH_ESR1750 is not set # CONFIG_ATH79_MACH_ESR900 is not set +# CONFIG_ATH79_MACH_EW_BALIN is not set # CONFIG_ATH79_MACH_EW_DORIN is not set # CONFIG_ATH79_MACH_F9K1115V2 is not set # CONFIG_ATH79_MACH_FRITZ300E is not set diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9 index 0e224ae1c4..19f3541de8 100644 --- a/target/linux/ar71xx/config-4.9 +++ b/target/linux/ar71xx/config-4.9 @@ -106,6 +106,7 @@ CONFIG_ATH79=y # CONFIG_ATH79_MACH_EPG5000 is not set # CONFIG_ATH79_MACH_ESR1750 is not set # CONFIG_ATH79_MACH_ESR900 is not set +# CONFIG_ATH79_MACH_EW_BALIN is not set # CONFIG_ATH79_MACH_EW_DORIN is not set # CONFIG_ATH79_MACH_F9K1115V2 is not set # CONFIG_ATH79_MACH_FRITZ300E is not set diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index caaaf97792..ce54f1d4bb 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -711,6 +711,17 @@ config ATH79_MACH_ESR900 select ATH79_DEV_WMAC select ATH79_NVRAM +config ATH79_MACH_EW_BALIN + bool "embedded wireless Balin Platform support" + select SOC_AR934X + select ATH79_DEV_M25P80 + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_WMAC + select ATH79_DEV_ETH + select ATH79_DEV_USB + select ATH79_DEV_AP9X_PCI if PCI + config ATH79_MACH_EW_DORIN bool "embedded wireless Dorin Platform support" select SOC_AR933X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index e9f4d9852b..d09762da40 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -116,6 +116,7 @@ obj-$(CONFIG_ATH79_MACH_ENS202EXT) += mach-ens202ext.o obj-$(CONFIG_ATH79_MACH_EPG5000) += mach-epg5000.o obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o +obj-$(CONFIG_ATH79_MACH_EW_BALIN) += mach-ew-balin.o obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o obj-$(CONFIG_ATH79_MACH_FRITZ300E) += mach-fritz300e.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c new file mode 100644 index 0000000000..2e82ffdaa1 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c @@ -0,0 +1,110 @@ +/* + * EW Balin board support + * (based on Atheros DB120 reference board support) + * + * Copyright (c) 2011 Qualcomm Atheros + * Copyright (c) 2011-2012 Gabor Juhos + * Copyright (C) 2017 Embedded Wireless GmbH www.80211.de + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include +#include +#include +#include +#include + +#include + +#include "common.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-spi.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" +#include "pci.h" + +#define BALIN_GPIO_LED_STATUS 14 + +#define BALIN_GPIO_BTN_WPS 18 + +#define BALIN_KEYS_POLL_INTERVAL 20 /* msecs */ +#define BALIN_KEYS_DEBOUNCE_INTERVAL (3 * BALIN_KEYS_POLL_INTERVAL) + +#define BALIN_CALDATA_OFFSET 0x1000 +#define BALIN_WMAC_MAC_OFFSET (BALIN_CALDATA_OFFSET + 0x02) + +static struct gpio_led balin_leds_gpio[] __initdata = { + { + .name = "balin:green:status", + .gpio = BALIN_GPIO_LED_STATUS, + .active_low = 1, + }, +}; + +static struct gpio_keys_button balin_gpio_keys[] __initdata = { + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = BALIN_KEYS_DEBOUNCE_INTERVAL, + .gpio = BALIN_GPIO_BTN_WPS, + .active_low = 0, + }, +}; + + +static void __init balin_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + static u8 mac[6]; + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(balin_leds_gpio), + balin_leds_gpio); + + ath79_register_gpio_keys_polled(-1, BALIN_KEYS_POLL_INTERVAL, + ARRAY_SIZE(balin_gpio_keys), + balin_gpio_keys); + + ath79_register_usb(); + + ath79_register_wmac(art + BALIN_CALDATA_OFFSET, NULL); + + ath79_register_pci(); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | + AR934X_ETH_CFG_SW_ONLY_MODE); + + ath79_register_mdio(1, 0x0); + + /* GMAC1 is connected to the internal switch */ + memcpy(mac, art + BALIN_WMAC_MAC_OFFSET, sizeof(mac)); + mac[3] |= 0x40; + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_eth1_data.speed = SPEED_1000; + ath79_eth1_data.duplex = DUPLEX_FULL; + + ath79_register_eth(1); +} + +MIPS_MACHINE(ATH79_MACH_EW_BALIN, "EW-BALIN", "EmbWir-Balin", + balin_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 394be00c99..4093c8b76d 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -107,6 +107,7 @@ enum ath79_mach_type { ATH79_MACH_EPG5000, /* EnGenius EPG5000 */ ATH79_MACH_ESR1750, /* EnGenius ESR1750 */ ATH79_MACH_ESR900, /* EnGenius ESR900 */ + ATH79_MACH_EW_BALIN, /* embedded wireless Balin Platform */ ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */ ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */ ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */ diff --git a/target/linux/ar71xx/generic/config-default b/target/linux/ar71xx/generic/config-default index cac1a27c3b..a212617591 100644 --- a/target/linux/ar71xx/generic/config-default +++ b/target/linux/ar71xx/generic/config-default @@ -79,6 +79,7 @@ CONFIG_ATH79_MACH_ENS202EXT=y CONFIG_ATH79_MACH_EPG5000=y CONFIG_ATH79_MACH_ESR1750=y CONFIG_ATH79_MACH_ESR900=y +CONFIG_ATH79_MACH_EW_BALIN=y CONFIG_ATH79_MACH_EW_DORIN=y CONFIG_ATH79_MACH_F9K1115V2=y CONFIG_ATH79_MACH_FRITZ300E=y diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk index 88b9f930b6..b2e701c844 100644 --- a/target/linux/ar71xx/image/generic.mk +++ b/target/linux/ar71xx/image/generic.mk @@ -272,6 +272,15 @@ define Device/dragino2 endef TARGET_DEVICES += dragino2 +define Device/ew-balin + DEVICE_TITLE := Embedded Wireless Balin Platform + DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea + BOARDNAME = EW-BALIN + IMAGE_SIZE = 16000k + MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro +endef +TARGET_DEVICES += ew-balin + define Device/ew-dorin DEVICE_TITLE := Embedded Wireless Dorin Platform DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea