kernel: bump 5.4 to 5.4.230

Compile-tested: x86/64
Run-tested: x86/64

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Hauke Mehrtens 2023-01-28 19:09:19 +01:00
parent ac7386a15d
commit 4292832a6a
94 changed files with 183 additions and 213 deletions

View File

@ -1,2 +1,2 @@
LINUX_VERSION-5.4 = .225
LINUX_KERNEL_HASH-5.4.225 = 59f596f6714317955cf481590babcf015aff2bc1900bd8e8dc8f7af73bc560aa
LINUX_VERSION-5.4 = .230
LINUX_KERNEL_HASH-5.4.230 = a74fd32ccc1025b72f3ba7183208761f7c6190fb96e8f484f6d543a5a183e62f

View File

@ -93,8 +93,8 @@ Signed-off-by: Vinod Koul <vkoul@kernel.org>
static const char hcd_name[] = "xhci_hcd";
static struct hc_driver __read_mostly xhci_pci_hc_driver;
@@ -340,6 +380,873 @@ static void xhci_pme_acpi_rtd3_enable(st
static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
@@ -373,6 +413,873 @@ static void xhci_pme_acpi_rtd3_enable(st
static void xhci_find_lpm_incapable_ports(struct usb_hcd *hcd, struct usb_device *hdev) { }
#endif /* CONFIG_ACPI */
+static const struct renesas_fw_entry {
@ -967,7 +967,7 @@ Signed-off-by: Vinod Koul <vkoul@kernel.org>
/* called during probe() after chip reset completes */
static int xhci_pci_setup(struct usb_hcd *hcd)
{
@@ -381,6 +1288,27 @@ static int xhci_pci_probe(struct pci_dev
@@ -424,6 +1331,27 @@ static int xhci_pci_probe(struct pci_dev
struct hc_driver *driver;
struct usb_hcd *hcd;
@ -995,7 +995,7 @@ Signed-off-by: Vinod Koul <vkoul@kernel.org>
driver = (struct hc_driver *)id->driver_data;
/* Prevent runtime suspending between USB-2 and USB-3 initialization */
@@ -442,6 +1370,16 @@ static void xhci_pci_remove(struct pci_d
@@ -487,6 +1415,16 @@ static void xhci_pci_remove(struct pci_d
{
struct xhci_hcd *xhci;
@ -1012,7 +1012,7 @@ Signed-off-by: Vinod Koul <vkoul@kernel.org>
xhci = hcd_to_xhci(pci_get_drvdata(dev));
xhci->xhc_state |= XHCI_STATE_REMOVING;
@@ -581,6 +1519,11 @@ static int xhci_pci_resume(struct usb_hc
@@ -626,6 +1564,11 @@ static int xhci_pci_resume(struct usb_hc
if (pdev->vendor == PCI_VENDOR_ID_INTEL)
usb_enable_intel_xhci_ports(pdev);

View File

@ -13,7 +13,7 @@ produce a noisy warning.
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -302,6 +302,7 @@ static void xhci_pci_quirks(struct devic
@@ -305,6 +305,7 @@ static void xhci_pci_quirks(struct devic
pdev->device == 0x0015) {
xhci->quirks |= XHCI_RESET_ON_RESUME;
xhci->quirks |= XHCI_ZERO_64B_REGS;
@ -43,7 +43,7 @@ produce a noisy warning.
hcd->msi_enabled = 1;
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1890,6 +1890,7 @@ struct xhci_hcd {
@@ -1891,6 +1891,7 @@ struct xhci_hcd {
struct xhci_hub usb2_rhub;
struct xhci_hub usb3_rhub;
/* support xHCI 1.0 spec USB2 hardware LPM */

View File

@ -17,7 +17,7 @@ Signed-off-by: Nick Hainke <vincent@systemli.org>
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1987,7 +1987,7 @@ static int sr2_bit7_quad_enable(struct s
@@ -1989,7 +1989,7 @@ static int sr2_bit7_quad_enable(struct s
static int spi_nor_clear_sr_bp(struct spi_nor *nor)
{
int ret;

View File

@ -214,7 +214,7 @@
#include <linux/uaccess.h>
#include <linux/ipv6.h>
#include <linux/icmpv6.h>
@@ -864,10 +865,10 @@ static void tcp_v6_send_response(const s
@@ -866,10 +867,10 @@ static void tcp_v6_send_response(const s
topt = (__be32 *)(t1 + 1);
if (tsecr) {

View File

@ -13,7 +13,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -734,7 +734,7 @@ static int spidev_probe(struct spi_devic
@@ -745,7 +745,7 @@ static int spidev_probe(struct spi_devic
* compatible string, it is a Linux implementation thing
* rather than a description of the hardware.
*/

View File

@ -14,7 +14,7 @@ use the same logic.
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2576,7 +2576,12 @@ static int pl011_setup_port(struct devic
@@ -2588,7 +2588,12 @@ static int pl011_setup_port(struct devic
if (IS_ERR(base))
return PTR_ERR(base);

View File

@ -26,7 +26,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1662,6 +1662,23 @@ static void pl011_put_poll_char(struct u
@@ -1665,6 +1665,23 @@ static void pl011_put_poll_char(struct u
#endif /* CONFIG_CONSOLE_POLL */
@ -50,7 +50,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
static int pl011_hwinit(struct uart_port *port)
{
struct uart_amba_port *uap =
@@ -1678,7 +1695,7 @@ static int pl011_hwinit(struct uart_port
@@ -1681,7 +1698,7 @@ static int pl011_hwinit(struct uart_port
if (retval)
return retval;
@ -59,7 +59,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
/* Clear pending error and receive interrupts */
pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS |
@@ -2322,7 +2339,7 @@ static int pl011_console_setup(struct co
@@ -2334,7 +2351,7 @@ static int pl011_console_setup(struct co
plat->init();
}
@ -68,7 +68,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
if (uap->vendor->fixed_options) {
baud = uap->fixed_baud;
@@ -2507,6 +2524,7 @@ static struct uart_driver amba_reg = {
@@ -2519,6 +2536,7 @@ static struct uart_driver amba_reg = {
.cons = AMBA_CONSOLE,
};
@ -76,7 +76,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
static int pl011_probe_dt_alias(int index, struct device *dev)
{
struct device_node *np;
@@ -2538,6 +2556,7 @@ static int pl011_probe_dt_alias(int inde
@@ -2550,6 +2568,7 @@ static int pl011_probe_dt_alias(int inde
return ret;
}

View File

@ -17,7 +17,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1395,6 +1395,7 @@ static bool pl011_tx_char(struct uart_am
@@ -1398,6 +1398,7 @@ static bool pl011_tx_char(struct uart_am
return false; /* unable to transmit character */
pl011_write(c, uap, REG_DR);

View File

@ -36,7 +36,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
- reg
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2663,6 +2663,11 @@ static int pl011_probe(struct amba_devic
@@ -2675,6 +2675,11 @@ static int pl011_probe(struct amba_devic
if (IS_ERR(uap->clk))
return PTR_ERR(uap->clk);

View File

@ -1040,7 +1040,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
}
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -5382,7 +5382,7 @@ static void port_event(struct usb_hub *h
@@ -5385,7 +5385,7 @@ static void port_event(struct usb_hub *h
port_dev->over_current_count++;
port_over_current_notify(port_dev);

View File

@ -267,7 +267,7 @@ Signed-off-by: Yaroslav Rosomakho <yaroslavros@gmail.com>
goto out;
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1931,7 +1931,8 @@ EXPORT_SYMBOL(mmc_erase);
@@ -1936,7 +1936,8 @@ EXPORT_SYMBOL(mmc_erase);
int mmc_can_erase(struct mmc_card *card)
{
if ((card->host->caps & MMC_CAP_ERASE) &&

View File

@ -399,7 +399,7 @@ mfd: Add rpi_sense_core of compatible string
+
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -2277,6 +2277,19 @@ config FB_SM712
@@ -2276,6 +2276,19 @@ config FB_SM712
called sm712fb. If you want to compile it as a module, say M
here and read <file:Documentation/kbuild/modules.rst>.

View File

@ -10,7 +10,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -271,6 +271,10 @@ static void xhci_pci_quirks(struct devic
@@ -274,6 +274,10 @@ static void xhci_pci_quirks(struct devic
pdev->device == 0x3432)
xhci->quirks |= XHCI_BROKEN_STREAMS;

View File

@ -70,7 +70,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
* @dev: the device whose endpoint is being disabled
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1818,6 +1818,8 @@ extern int usb_clear_halt(struct usb_dev
@@ -1821,6 +1821,8 @@ extern int usb_clear_halt(struct usb_dev
extern int usb_reset_configuration(struct usb_device *dev);
extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate);
extern void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr);

View File

@ -119,7 +119,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
* non-error returns are a promise to giveback() the urb later
* we drop ownership so next owner (or urb unlink) can get it
*/
@@ -5387,6 +5484,7 @@ static const struct hc_driver xhci_hc_dr
@@ -5401,6 +5498,7 @@ static const struct hc_driver xhci_hc_dr
.endpoint_reset = xhci_endpoint_reset,
.check_bandwidth = xhci_check_bandwidth,
.reset_bandwidth = xhci_reset_bandwidth,

View File

@ -58,7 +58,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
spin_unlock(&uap->port.lock);
dev_vdbg(uap->port.dev,
"Took %d chars from DMA buffer and %d chars from the FIFO\n",
@@ -1359,6 +1362,7 @@ __acquires(&uap->port.lock)
@@ -1362,6 +1365,7 @@ __acquires(&uap->port.lock)
{
pl011_fifo_to_tty(uap);
@ -66,7 +66,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
spin_unlock(&uap->port.lock);
tty_flip_buffer_push(&uap->port.state->port);
/*
@@ -1494,6 +1498,7 @@ static irqreturn_t pl011_int(int irq, vo
@@ -1497,6 +1501,7 @@ static irqreturn_t pl011_int(int irq, vo
int handled = 0;
spin_lock_irqsave(&uap->port.lock, flags);
@ -74,7 +74,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
status = pl011_read(uap, REG_RIS) & uap->im;
if (status) {
do {
@@ -1513,7 +1518,7 @@ static irqreturn_t pl011_int(int irq, vo
@@ -1516,7 +1521,7 @@ static irqreturn_t pl011_int(int irq, vo
UART011_CTSMIS|UART011_RIMIS))
pl011_modem_status(uap);
if (status & UART011_TXIS)

View File

@ -23,7 +23,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -272,8 +272,10 @@ static void xhci_pci_quirks(struct devic
@@ -275,8 +275,10 @@ static void xhci_pci_quirks(struct devic
xhci->quirks |= XHCI_BROKEN_STREAMS;
if (pdev->vendor == PCI_VENDOR_ID_VIA &&
@ -80,7 +80,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
/*
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1880,6 +1880,7 @@ struct xhci_hcd {
@@ -1881,6 +1881,7 @@ struct xhci_hcd {
#define XHCI_DEFAULT_PM_RUNTIME_ALLOW BIT_ULL(33)
#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34)
#define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35)

View File

@ -33,7 +33,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
#define USB_VENDOR_ID_BELKIN 0x050d
#define USB_DEVICE_ID_FLIP_KVM 0x3201
@@ -1264,6 +1267,9 @@
@@ -1271,6 +1274,9 @@
#define USB_VENDOR_ID_XAT 0x2505
#define USB_DEVICE_ID_XAT_CSR 0x0220
@ -53,7 +53,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_MULTI_TOUCH), HID_QUIRK_MULTI_INPUT },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_PIXART_USB_OPTICAL_MOUSE), HID_QUIRK_ALWAYS_POLL },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_PIXART_USB_OPTICAL_MOUSE2), HID_QUIRK_ALWAYS_POLL },
@@ -194,6 +195,7 @@ static const struct hid_device_id hid_qu
@@ -197,6 +198,7 @@ static const struct hid_device_id hid_qu
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD2, USB_DEVICE_ID_SMARTJOY_DUAL_PLUS), HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_QUAD_USB_JOYPAD), HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
{ HID_USB_DEVICE(USB_VENDOR_ID_XIN_MO, USB_DEVICE_ID_XIN_MO_DUAL_ARCADE), HID_QUIRK_MULTI_INPUT },

View File

@ -29,7 +29,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1430,6 +1430,10 @@ static bool pl011_tx_chars(struct uart_a
@@ -1433,6 +1433,10 @@ static bool pl011_tx_chars(struct uart_a
if (likely(from_irq) && count-- == 0)
break;

View File

@ -187,7 +187,7 @@ Signed-off-by: Christoph Hellwig <hch@lst.de>
}
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -901,7 +901,7 @@ static int ahci_configure_dma_masks(stru
@@ -921,7 +921,7 @@ static int ahci_configure_dma_masks(stru
* value, don't extend it here. This happens on STA2X11, for example.
*
* XXX: manipulating the DMA mask from platform code is completely

View File

@ -13,7 +13,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech>
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -39,7 +39,7 @@
@@ -40,7 +40,7 @@
pr_debug("%s: " DRIVER_NAME ": " f, mmc_hostname(host->mmc), ## x)
#define SDHCI_DUMP(f, x...) \
@ -22,7 +22,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech>
#define MAX_TUNING_LOOP 40
@@ -2780,7 +2780,7 @@ static void sdhci_timeout_timer(struct t
@@ -2825,7 +2825,7 @@ static void sdhci_timeout_timer(struct t
spin_lock_irqsave(&host->lock, flags);
if (host->cmd && !sdhci_data_line_cmd(host->cmd)) {
@ -31,7 +31,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech>
mmc_hostname(host->mmc));
sdhci_dumpregs(host);
@@ -2802,7 +2802,7 @@ static void sdhci_timeout_data_timer(str
@@ -2847,7 +2847,7 @@ static void sdhci_timeout_data_timer(str
if (host->data || host->data_cmd ||
(host->cmd && sdhci_data_line_cmd(host->cmd))) {

View File

@ -11,7 +11,7 @@ This reverts commit 83b2a8fe43bda0c11981ad6afa5dd0104d78be28.
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -399,7 +399,6 @@ spidev_ioctl(struct file *filp, unsigned
@@ -410,7 +410,6 @@ spidev_ioctl(struct file *filp, unsigned
else
retval = get_user(tmp, (u32 __user *)arg);
if (retval == 0) {
@ -19,7 +19,7 @@ This reverts commit 83b2a8fe43bda0c11981ad6afa5dd0104d78be28.
u32 save = spi->mode;
if (tmp & ~SPI_MODE_MASK) {
@@ -407,10 +406,6 @@ spidev_ioctl(struct file *filp, unsigned
@@ -418,10 +417,6 @@ spidev_ioctl(struct file *filp, unsigned
break;
}

View File

@ -22,7 +22,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -275,6 +275,7 @@ static void xhci_pci_quirks(struct devic
@@ -278,6 +278,7 @@ static void xhci_pci_quirks(struct devic
pdev->device == 0x3483) {
xhci->quirks |= XHCI_LPM_SUPPORT;
xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS;
@ -51,7 +51,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1883,6 +1883,7 @@ struct xhci_hcd {
@@ -1884,6 +1884,7 @@ struct xhci_hcd {
#define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(36)
#define XHCI_SKIP_PHY_INIT BIT_ULL(37)
#define XHCI_DISABLE_SPARSE BIT_ULL(38)

View File

@ -127,7 +127,7 @@ it on BCM4708 family.
/*
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1880,6 +1880,7 @@ struct xhci_hcd {
@@ -1881,6 +1881,7 @@ struct xhci_hcd {
#define XHCI_DEFAULT_PM_RUNTIME_ALLOW BIT_ULL(33)
#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34)
#define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35)

View File

@ -107,7 +107,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
}
static struct clk clk_pcie = {
@@ -548,6 +562,21 @@ static struct clk_lookup bcm6368_clks[]
@@ -550,6 +564,21 @@ static struct clk_lookup bcm6368_clks[]
CLKDEV_INIT(NULL, "ipsec", &clk_ipsec),
};
@ -129,7 +129,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
#define HSSPI_PLL_HZ_6328 133333333
#define HSSPI_PLL_HZ_6362 400000000
@@ -580,6 +609,10 @@ static int __init bcm63xx_clk_init(void)
@@ -582,6 +611,10 @@ static int __init bcm63xx_clk_init(void)
case BCM6368_CPU_ID:
clkdev_add_table(bcm6368_clks, ARRAY_SIZE(bcm6368_clks));
break;

View File

@ -57,7 +57,7 @@ Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318
mask = CKCTL_6328_HSSPI_EN;
else if (BCMCPU_IS_6362())
mask = CKCTL_6362_HSSPI_EN;
@@ -456,6 +458,19 @@ static struct clk_lookup bcm3368_clks[]
@@ -458,6 +460,19 @@ static struct clk_lookup bcm3368_clks[]
CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1),
};
@ -77,7 +77,7 @@ Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318
static struct clk_lookup bcm6328_clks[] = {
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
@@ -577,6 +592,7 @@ static struct clk_lookup bcm63268_clks[]
@@ -579,6 +594,7 @@ static struct clk_lookup bcm63268_clks[]
CLKDEV_INIT(NULL, "pcie", &clk_pcie),
};
@ -85,7 +85,7 @@ Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318
#define HSSPI_PLL_HZ_6328 133333333
#define HSSPI_PLL_HZ_6362 400000000
@@ -586,6 +602,10 @@ static int __init bcm63xx_clk_init(void)
@@ -588,6 +604,10 @@ static int __init bcm63xx_clk_init(void)
case BCM3368_CPU_ID:
clkdev_add_table(bcm3368_clks, ARRAY_SIZE(bcm3368_clks));
break;

View File

@ -9,7 +9,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@@ -501,6 +501,8 @@ static struct clk_lookup bcm3368_clks[]
@@ -503,6 +503,8 @@ static struct clk_lookup bcm3368_clks[]
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
@ -18,7 +18,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree
/* gated clocks */
CLKDEV_INIT(NULL, "enet0", &clk_enet0),
CLKDEV_INIT(NULL, "enet1", &clk_enet1),
@@ -517,7 +519,9 @@ static struct clk_lookup bcm6318_clks[]
@@ -519,7 +521,9 @@ static struct clk_lookup bcm6318_clks[]
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
@ -28,7 +28,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree
/* gated clocks */
CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
@@ -531,7 +535,10 @@ static struct clk_lookup bcm6328_clks[]
@@ -533,7 +537,10 @@ static struct clk_lookup bcm6328_clks[]
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
@ -39,7 +39,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree
/* gated clocks */
CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
@@ -544,6 +551,7 @@ static struct clk_lookup bcm6338_clks[]
@@ -546,6 +553,7 @@ static struct clk_lookup bcm6338_clks[]
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
@ -47,7 +47,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree
/* gated clocks */
CLKDEV_INIT(NULL, "enet0", &clk_enet0),
CLKDEV_INIT(NULL, "enet1", &clk_enet1),
@@ -558,6 +566,7 @@ static struct clk_lookup bcm6345_clks[]
@@ -560,6 +568,7 @@ static struct clk_lookup bcm6345_clks[]
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
@ -55,7 +55,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree
/* gated clocks */
CLKDEV_INIT(NULL, "enet0", &clk_enet0),
CLKDEV_INIT(NULL, "enet1", &clk_enet1),
@@ -572,6 +581,7 @@ static struct clk_lookup bcm6348_clks[]
@@ -574,6 +583,7 @@ static struct clk_lookup bcm6348_clks[]
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
@ -63,7 +63,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree
/* gated clocks */
CLKDEV_INIT(NULL, "enet0", &clk_enet0),
CLKDEV_INIT(NULL, "enet1", &clk_enet1),
@@ -588,6 +598,8 @@ static struct clk_lookup bcm6358_clks[]
@@ -590,6 +600,8 @@ static struct clk_lookup bcm6358_clks[]
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
@ -72,7 +72,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree
/* gated clocks */
CLKDEV_INIT(NULL, "enet0", &clk_enet0),
CLKDEV_INIT(NULL, "enet1", &clk_enet1),
@@ -607,7 +619,10 @@ static struct clk_lookup bcm6362_clks[]
@@ -609,7 +621,10 @@ static struct clk_lookup bcm6362_clks[]
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
@ -83,7 +83,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree
/* gated clocks */
CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
@@ -623,6 +638,8 @@ static struct clk_lookup bcm6368_clks[]
@@ -625,6 +640,8 @@ static struct clk_lookup bcm6368_clks[]
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
@ -92,7 +92,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree
/* gated clocks */
CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
@@ -637,7 +654,10 @@ static struct clk_lookup bcm63268_clks[]
@@ -639,7 +656,10 @@ static struct clk_lookup bcm63268_clks[]
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),

View File

@ -24,7 +24,7 @@
* Internal peripheral clock
*/
static struct clk clk_periph = {
@@ -624,6 +641,7 @@ static struct clk_lookup bcm6362_clks[]
@@ -626,6 +643,7 @@ static struct clk_lookup bcm6362_clks[]
CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll),
/* gated clocks */
@ -32,7 +32,7 @@
CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
CLKDEV_INIT(NULL, "usbd", &clk_usbd),
@@ -641,6 +659,7 @@ static struct clk_lookup bcm6368_clks[]
@@ -643,6 +661,7 @@ static struct clk_lookup bcm6368_clks[]
CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
CLKDEV_INIT("10000120.serial", "refclk", &clk_periph),
/* gated clocks */
@ -40,7 +40,7 @@
CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
CLKDEV_INIT(NULL, "usbd", &clk_usbd),
@@ -659,6 +678,7 @@ static struct clk_lookup bcm63268_clks[]
@@ -661,6 +680,7 @@ static struct clk_lookup bcm63268_clks[]
CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll),
/* gated clocks */

View File

@ -103,4 +103,4 @@ Link: https://lore.kernel.org/linux-mtd/20220622010628.30414-4-ansuelsmth@gmail.
+ mtd_check_of_node(mtd);
of_node_get(mtd_get_of_node(mtd));
error = device_register(&mtd->dev);
if (error)
if (error) {

View File

@ -25,7 +25,7 @@ Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -1067,6 +1067,34 @@ int __get_mtd_device(struct mtd_info *mt
@@ -1069,6 +1069,34 @@ int __get_mtd_device(struct mtd_info *mt
EXPORT_SYMBOL_GPL(__get_mtd_device);
/**

View File

@ -30,7 +30,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -340,6 +340,7 @@ struct napi_struct {
@@ -347,6 +347,7 @@ struct napi_struct {
struct list_head dev_list;
struct hlist_node napi_hash_node;
unsigned int napi_id;
@ -38,7 +38,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
};
enum {
@@ -350,6 +351,7 @@ enum {
@@ -357,6 +358,7 @@ enum {
NAPI_STATE_HASHED, /* In NAPI hash (busy polling possible) */
NAPI_STATE_NO_BUSY_POLL,/* Do not add in napi_hash, no busy polling */
NAPI_STATE_IN_BUSY_POLL,/* sk_busy_loop() owns this NAPI */
@ -46,7 +46,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
};
enum {
@@ -360,6 +362,7 @@ enum {
@@ -367,6 +369,7 @@ enum {
NAPIF_STATE_HASHED = BIT(NAPI_STATE_HASHED),
NAPIF_STATE_NO_BUSY_POLL = BIT(NAPI_STATE_NO_BUSY_POLL),
NAPIF_STATE_IN_BUSY_POLL = BIT(NAPI_STATE_IN_BUSY_POLL),
@ -54,7 +54,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
};
enum gro_result {
@@ -504,20 +507,7 @@ bool napi_hash_del(struct napi_struct *n
@@ -511,20 +514,7 @@ bool napi_hash_del(struct napi_struct *n
*/
void napi_disable(struct napi_struct *n);
@ -76,7 +76,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
/**
* napi_synchronize - wait until NAPI is not running
@@ -1783,6 +1773,8 @@ enum netdev_ml_priv_type {
@@ -1790,6 +1780,8 @@ enum netdev_ml_priv_type {
*
* @wol_enabled: Wake-on-LAN is enabled
*
@ -85,7 +85,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
* FIXME: cleanup struct net_device such that network protocol info
* moves out.
*/
@@ -2075,6 +2067,7 @@ struct net_device {
@@ -2082,6 +2074,7 @@ struct net_device {
struct lock_class_key addr_list_lock_key;
bool proto_down;
unsigned wol_enabled:1;

View File

@ -46,7 +46,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
+ == ==================================
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -498,6 +498,8 @@ static inline bool napi_complete(struct
@@ -505,6 +505,8 @@ static inline bool napi_complete(struct
*/
bool napi_hash_del(struct napi_struct *napi);

View File

@ -27,7 +27,7 @@ Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -352,6 +352,7 @@ enum {
@@ -359,6 +359,7 @@ enum {
NAPI_STATE_NO_BUSY_POLL,/* Do not add in napi_hash, no busy polling */
NAPI_STATE_IN_BUSY_POLL,/* sk_busy_loop() owns this NAPI */
NAPI_STATE_THREADED, /* The poll is performed inside its own thread*/
@ -35,7 +35,7 @@ Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
};
enum {
@@ -363,6 +364,7 @@ enum {
@@ -370,6 +371,7 @@ enum {
NAPIF_STATE_NO_BUSY_POLL = BIT(NAPI_STATE_NO_BUSY_POLL),
NAPIF_STATE_IN_BUSY_POLL = BIT(NAPI_STATE_IN_BUSY_POLL),
NAPIF_STATE_THREADED = BIT(NAPI_STATE_THREADED),

View File

@ -1,31 +0,0 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 7 Dec 2022 07:57:58 +0100
Subject: [PATCH] Revert "net: dsa: b53: Fix valid setting for MDB entries"
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This reverts commit 1fae6eb0fc91d3ecb539e03f9e4dcd1c53ada553.
Upstream commit was a fix for an overlook of setting "ent.is_valid"
twice after 5d65b64a3d97 ("net: dsa: b53: Add support for MDB").
Since MDB support was not backported to stable kernels (it's not a bug
fix) there is nothing to fix there. Backporting this commit resulted in
"env.is_valid" not being set at all.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
drivers/net/dsa/b53/b53_common.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1551,6 +1551,7 @@ static int b53_arl_op(struct b53_device
memset(&ent, 0, sizeof(ent));
ent.port = port;
+ ent.is_valid = is_valid;
ent.vid = vid;
ent.is_static = true;
memcpy(ent.mac, addr, ETH_ALEN);

View File

@ -130,7 +130,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
/* Some Ethernet drivers try to connect to a PHY device before
* calling register_netdevice() -> netdev_register_kobject() and
* does the dev->dev.kobj initialization. Here we only check for
@@ -2291,6 +2354,9 @@ static int phy_remove(struct device *dev
@@ -2292,6 +2355,9 @@ static int phy_remove(struct device *dev
phydev->state = PHY_DOWN;
mutex_unlock(&phydev->lock);

View File

@ -20,7 +20,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1682,6 +1682,40 @@ static int genphy_config_advert(struct p
@@ -1683,6 +1683,40 @@ static int genphy_config_advert(struct p
}
/**
@ -61,7 +61,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
* genphy_config_eee_advert - disable unwanted eee mode advertisement
* @phydev: target phy_device struct
*
@@ -1790,6 +1824,54 @@ int __genphy_config_aneg(struct phy_devi
@@ -1791,6 +1825,54 @@ int __genphy_config_aneg(struct phy_devi
EXPORT_SYMBOL(__genphy_config_aneg);
/**
@ -116,7 +116,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
* genphy_aneg_done - return auto-negotiation status
* @phydev: target phy_device struct
*
@@ -1962,6 +2044,63 @@ int genphy_read_status(struct phy_device
@@ -1963,6 +2045,63 @@ int genphy_read_status(struct phy_device
EXPORT_SYMBOL(genphy_read_status);
/**

View File

@ -2255,6 +2255,7 @@ CONFIG_INET=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_TABLE_PERTURB_ORDER=16
# CONFIG_INET_TCP_DIAG is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_UDP_DIAG is not set

View File

@ -20,7 +20,7 @@
/* Part specific fixup hooks. */
const struct spi_nor_fixups *fixups;
@@ -1985,6 +1989,9 @@ static int spi_nor_clear_sr_bp(struct sp
@@ -1987,6 +1991,9 @@ static int spi_nor_clear_sr_bp(struct sp
int ret;
u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
@ -30,7 +30,7 @@
ret = read_sr(nor);
if (ret < 0) {
dev_err(nor->dev, "error while reading status register\n");
@@ -2338,7 +2345,7 @@ static const struct flash_info spi_nor_i
@@ -2340,7 +2347,7 @@ static const struct flash_info spi_nor_i
{ "mx25l1606e", INFO(0xc22015, 0, 64 * 1024, 32, SECT_4K) },
{ "mx25l3205d", INFO(0xc22016, 0, 64 * 1024, 64, SECT_4K) },
{ "mx25l3255e", INFO(0xc29e16, 0, 64 * 1024, 64, SECT_4K) },
@ -39,7 +39,7 @@
{ "mx25u2033e", INFO(0xc22532, 0, 64 * 1024, 4, SECT_4K) },
{ "mx25u3235f", INFO(0xc22536, 0, 64 * 1024, 64,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
@@ -5026,6 +5033,9 @@ int spi_nor_scan(struct spi_nor *nor, co
@@ -5028,6 +5035,9 @@ int spi_nor_scan(struct spi_nor *nor, co
if (info->flags & USE_CLSR)
nor->flags |= SNOR_F_USE_CLSR;

View File

@ -44,7 +44,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
device, it has to decide which ones to send first, which ones to
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -2278,7 +2278,7 @@ static int __init pktsched_init(void)
@@ -2283,7 +2283,7 @@ static int __init pktsched_init(void)
return err;
}

View File

@ -15,7 +15,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1540,6 +1540,7 @@ enum netdev_priv_flags {
@@ -1547,6 +1547,7 @@ enum netdev_priv_flags {
IFF_FAILOVER_SLAVE = 1<<28,
IFF_L3MDEV_RX_HANDLER = 1<<29,
IFF_LIVE_RENAME_OK = 1<<30,
@ -23,7 +23,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
};
#define IFF_802_1Q_VLAN IFF_802_1Q_VLAN
@@ -1572,6 +1573,7 @@ enum netdev_priv_flags {
@@ -1579,6 +1580,7 @@ enum netdev_priv_flags {
#define IFF_FAILOVER_SLAVE IFF_FAILOVER_SLAVE
#define IFF_L3MDEV_RX_HANDLER IFF_L3MDEV_RX_HANDLER
#define IFF_LIVE_RENAME_OK IFF_LIVE_RENAME_OK
@ -31,7 +31,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
/* Specifies the type of the struct net_device::ml_priv pointer */
enum netdev_ml_priv_type {
@@ -1882,6 +1884,11 @@ struct net_device {
@@ -1889,6 +1891,11 @@ struct net_device {
const struct tlsdev_ops *tlsdev_ops;
#endif
@ -43,7 +43,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
const struct header_ops *header_ops;
unsigned int flags;
@@ -1964,6 +1971,10 @@ struct net_device {
@@ -1971,6 +1978,10 @@ struct net_device {
struct mpls_dev __rcu *mpls_ptr;
#endif

View File

@ -105,7 +105,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
{
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -400,6 +400,7 @@ config INET_TUNNEL
@@ -410,6 +410,7 @@ config INET_TUNNEL
config INET_DIAG
tristate "INET: socket monitoring interface"

View File

@ -8,7 +8,7 @@ Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -678,6 +678,7 @@ static const struct of_device_id spidev_
@@ -689,6 +689,7 @@ static const struct of_device_id spidev_
{ .compatible = "lwn,bk4" },
{ .compatible = "dh,dhcom-board" },
{ .compatible = "menlo,m53cpld" },

View File

@ -11,7 +11,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -2706,7 +2706,7 @@ static int spi_nor_write(struct mtd_info
@@ -2708,7 +2708,7 @@ static int spi_nor_write(struct mtd_info
write_enable(nor);
ret = spi_nor_write_data(nor, addr, page_remain, buf + i);

View File

@ -8,7 +8,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -4884,6 +4884,7 @@ int spi_nor_scan(struct spi_nor *nor, co
@@ -4886,6 +4886,7 @@ int spi_nor_scan(struct spi_nor *nor, co
*/
if (JEDEC_MFR(nor->info) == SNOR_MFR_ATMEL ||
JEDEC_MFR(nor->info) == SNOR_MFR_INTEL ||

View File

@ -17,7 +17,7 @@ Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -4398,6 +4398,7 @@ static void st_micron_set_default_init(s
@@ -4400,6 +4400,7 @@ static void st_micron_set_default_init(s
static void winbond_set_default_init(struct spi_nor *nor)
{
@ -25,7 +25,7 @@ Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
nor->params.set_4byte = winbond_set_4byte;
}
@@ -4886,6 +4887,7 @@ int spi_nor_scan(struct spi_nor *nor, co
@@ -4888,6 +4889,7 @@ int spi_nor_scan(struct spi_nor *nor, co
JEDEC_MFR(nor->info) == SNOR_MFR_INTEL ||
JEDEC_MFR(nor->info) == SNOR_MFR_MACRONIX ||
JEDEC_MFR(nor->info) == SNOR_MFR_SST ||

View File

@ -39,7 +39,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
depends on OF && (ARM || ARM64 || COMPILE_TEST)
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -4464,6 +4464,7 @@ static void spi_nor_info_init_params(str
@@ -4466,6 +4466,7 @@ static void spi_nor_info_init_params(str
struct spi_nor_erase_map *map = &params->erase_map;
const struct flash_info *info = nor->info;
struct device_node *np = spi_nor_get_flash_node(nor);
@ -47,7 +47,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
u8 i, erase_mask;
/* Initialize legacy flash parameters and settings. */
@@ -4527,6 +4528,21 @@ static void spi_nor_info_init_params(str
@@ -4529,6 +4530,21 @@ static void spi_nor_info_init_params(str
*/
erase_mask = 0;
i = 0;
@ -69,7 +69,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
if (info->flags & SECT_4K_PMC) {
erase_mask |= BIT(i);
spi_nor_set_erase_type(&map->erase_type[i], 4096u,
@@ -4538,6 +4554,7 @@ static void spi_nor_info_init_params(str
@@ -4540,6 +4556,7 @@ static void spi_nor_info_init_params(str
SPINOR_OP_BE_4K);
i++;
}

View File

@ -8,7 +8,7 @@ Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -2179,6 +2179,7 @@ static const struct flash_info spi_nor_i
@@ -2181,6 +2181,7 @@ static const struct flash_info spi_nor_i
{ "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) },
{ "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
{ "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) },

View File

@ -11,7 +11,7 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -2180,6 +2180,7 @@ static const struct flash_info spi_nor_i
@@ -2182,6 +2182,7 @@ static const struct flash_info spi_nor_i
{ "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
{ "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) },
{ "en25q128", INFO(0x1c3018, 0, 64 * 1024, 256, SECT_4K) },

View File

@ -30,7 +30,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -2507,6 +2507,9 @@ static const struct flash_info spi_nor_i
@@ -2509,6 +2509,9 @@ static const struct flash_info spi_nor_i
/* XMC (Wuhan Xinxin Semiconductor Manufacturing Corp.) */
{ "XM25QH64A", INFO(0x207017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "XM25QH128A", INFO(0x207018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },

View File

@ -20,7 +20,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
#include <linux/nvmem-provider.h>
#include <linux/mtd/mtd.h>
@@ -754,6 +755,15 @@ int add_mtd_device(struct mtd_info *mtd)
@@ -756,6 +757,15 @@ int add_mtd_device(struct mtd_info *mtd)
of this try_ nonsense, and no bitching about it
either. :) */
__module_get(THIS_MODULE);

View File

@ -42,7 +42,7 @@ Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
static int macronix_set_4byte(struct spi_nor *nor, bool enable)
{
if (nor->spimem) {
@@ -1261,6 +1277,10 @@ static int spi_nor_erase(struct mtd_info
@@ -1263,6 +1279,10 @@ static int spi_nor_erase(struct mtd_info
if (ret)
return ret;
@ -53,7 +53,7 @@ Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
/* whole-chip erase? */
if (len == mtd->size && !(nor->flags & SNOR_F_NO_OP_CHIP_ERASE)) {
unsigned long timeout;
@@ -1317,6 +1337,7 @@ static int spi_nor_erase(struct mtd_info
@@ -1319,6 +1339,7 @@ static int spi_nor_erase(struct mtd_info
write_disable(nor);
erase_err:
@ -61,7 +61,7 @@ Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE);
return ret;
@@ -1623,7 +1644,9 @@ static int spi_nor_lock(struct mtd_info
@@ -1625,7 +1646,9 @@ static int spi_nor_lock(struct mtd_info
if (ret)
return ret;
@ -71,7 +71,7 @@ Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_UNLOCK);
return ret;
@@ -1638,7 +1661,9 @@ static int spi_nor_unlock(struct mtd_inf
@@ -1640,7 +1663,9 @@ static int spi_nor_unlock(struct mtd_inf
if (ret)
return ret;
@ -81,7 +81,7 @@ Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_LOCK);
return ret;
@@ -1653,7 +1678,9 @@ static int spi_nor_is_locked(struct mtd_
@@ -1655,7 +1680,9 @@ static int spi_nor_is_locked(struct mtd_
if (ret)
return ret;
@ -91,7 +91,7 @@ Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_LOCK);
return ret;
@@ -2560,6 +2587,10 @@ static int spi_nor_read(struct mtd_info
@@ -2562,6 +2589,10 @@ static int spi_nor_read(struct mtd_info
if (ret)
return ret;
@ -102,7 +102,7 @@ Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
while (len) {
loff_t addr = from;
@@ -2583,6 +2614,7 @@ static int spi_nor_read(struct mtd_info
@@ -2585,6 +2616,7 @@ static int spi_nor_read(struct mtd_info
ret = 0;
read_err:
@ -110,7 +110,7 @@ Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_READ);
return ret;
}
@@ -2600,6 +2632,10 @@ static int sst_write(struct mtd_info *mt
@@ -2602,6 +2634,10 @@ static int sst_write(struct mtd_info *mt
if (ret)
return ret;
@ -121,7 +121,7 @@ Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
write_enable(nor);
nor->sst_write_second = false;
@@ -2662,6 +2698,7 @@ static int sst_write(struct mtd_info *mt
@@ -2664,6 +2700,7 @@ static int sst_write(struct mtd_info *mt
}
sst_write_err:
*retlen += actual;
@ -129,7 +129,7 @@ Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
return ret;
}
@@ -2684,6 +2721,10 @@ static int spi_nor_write(struct mtd_info
@@ -2686,6 +2723,10 @@ static int spi_nor_write(struct mtd_info
if (ret)
return ret;
@ -140,7 +140,7 @@ Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
for (i = 0; i < len; ) {
ssize_t written;
loff_t addr = to + i;
@@ -2723,6 +2764,7 @@ static int spi_nor_write(struct mtd_info
@@ -2725,6 +2766,7 @@ static int spi_nor_write(struct mtd_info
}
write_err:
@ -148,7 +148,7 @@ Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
return ret;
}
@@ -4727,9 +4769,13 @@ static int spi_nor_init(struct spi_nor *
@@ -4729,9 +4771,13 @@ static int spi_nor_init(struct spi_nor *
* reboots (e.g., crashes). Warn the user (or hopefully, system
* designer) that this is bad.
*/

View File

@ -10,7 +10,7 @@ Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -2233,6 +2233,11 @@ static const struct flash_info spi_nor_i
@@ -2235,6 +2235,11 @@ static const struct flash_info spi_nor_i
/* GigaDevice */
{

View File

@ -15,7 +15,7 @@ Signed-off-by: Mantas Pucka <mantas@8devices.com>
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -2172,6 +2172,32 @@ static struct spi_nor_fixups gd25q256_fi
@@ -2174,6 +2174,32 @@ static struct spi_nor_fixups gd25q256_fi
.default_init = gd25q256_default_init,
};
@ -48,7 +48,7 @@ Signed-off-by: Mantas Pucka <mantas@8devices.com>
/* NOTE: double check command sets and memory organization when you add
* more nor chips. This current list focusses on newer chips, which
* have been converging on command sets which including JEDEC ID.
@@ -2516,7 +2542,8 @@ static const struct flash_info spi_nor_i
@@ -2518,7 +2544,8 @@ static const struct flash_info spi_nor_i
{ "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) },
{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) },
{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },

View File

@ -17,7 +17,7 @@ Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -1136,6 +1136,44 @@ out_unlock:
@@ -1138,6 +1138,44 @@ out_unlock:
}
EXPORT_SYMBOL_GPL(get_mtd_device_nm);

View File

@ -55,7 +55,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
goto out;
if (!net_eq(dev_net(dev), sock_net(sk)))
@@ -2058,12 +2060,12 @@ static int packet_rcv(struct sk_buff *sk
@@ -2068,12 +2070,12 @@ static int packet_rcv(struct sk_buff *sk
unsigned int snaplen, res;
bool is_drop_n_account = false;
@ -71,7 +71,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
if (!net_eq(dev_net(dev), sock_net(sk)))
goto drop;
@@ -2189,12 +2191,12 @@ static int tpacket_rcv(struct sk_buff *s
@@ -2199,12 +2201,12 @@ static int tpacket_rcv(struct sk_buff *s
BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h2)) != 32);
BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h3)) != 48);
@ -87,7 +87,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
if (!net_eq(dev_net(dev), sock_net(sk)))
goto drop;
@@ -3301,6 +3303,7 @@ static int packet_create(struct net *net
@@ -3310,6 +3312,7 @@ static int packet_create(struct net *net
mutex_init(&po->pg_vec_lock);
po->rollover = NULL;
po->prot_hook.func = packet_rcv;
@ -95,7 +95,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
if (sock->type == SOCK_PACKET)
po->prot_hook.func = packet_rcv_spkt;
@@ -3944,6 +3947,16 @@ packet_setsockopt(struct socket *sock, i
@@ -3952,6 +3955,16 @@ packet_setsockopt(struct socket *sock, i
po->xmit = val ? packet_direct_xmit : dev_queue_xmit;
return 0;
}
@ -112,7 +112,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
default:
return -ENOPROTOOPT;
}
@@ -4000,6 +4013,13 @@ static int packet_getsockopt(struct sock
@@ -4008,6 +4021,13 @@ static int packet_getsockopt(struct sock
case PACKET_VNET_HDR:
val = po->has_vnet_hdr;
break;

View File

@ -23,7 +23,7 @@ Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -922,6 +922,13 @@ struct devlink;
@@ -929,6 +929,13 @@ struct devlink;
struct tlsdev_ops;
@ -37,7 +37,7 @@ Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
/*
* This structure defines the management hooks for network devices.
* The following hooks can be defined; unless noted otherwise, they are
@@ -1154,6 +1161,10 @@ struct tlsdev_ops;
@@ -1161,6 +1168,10 @@ struct tlsdev_ops;
* int (*ndo_bridge_dellink)(struct net_device *dev, struct nlmsghdr *nlh,
* u16 flags);
*
@ -48,7 +48,7 @@ Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* int (*ndo_change_carrier)(struct net_device *dev, bool new_carrier);
* Called to change device carrier. Soft-devices (like dummy, team, etc)
* which do not represent real hardware may define this to allow their
@@ -1401,6 +1412,8 @@ struct net_device_ops {
@@ -1408,6 +1419,8 @@ struct net_device_ops {
int (*ndo_bridge_dellink)(struct net_device *dev,
struct nlmsghdr *nlh,
u16 flags);

View File

@ -15,7 +15,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -923,6 +923,7 @@ struct tlsdev_ops;
@@ -930,6 +930,7 @@ struct tlsdev_ops;
struct flow_offload;
@ -23,7 +23,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
enum flow_offload_type {
FLOW_OFFLOAD_ADD = 0,
@@ -1161,8 +1162,15 @@ enum flow_offload_type {
@@ -1168,8 +1169,15 @@ enum flow_offload_type {
* int (*ndo_bridge_dellink)(struct net_device *dev, struct nlmsghdr *nlh,
* u16 flags);
*
@ -40,7 +40,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Adds/deletes flow entry to/from net device flowtable.
*
* int (*ndo_change_carrier)(struct net_device *dev, bool new_carrier);
@@ -1412,8 +1420,11 @@ struct net_device_ops {
@@ -1419,8 +1427,11 @@ struct net_device_ops {
int (*ndo_bridge_dellink)(struct net_device *dev,
struct nlmsghdr *nlh,
u16 flags);

View File

@ -11,7 +11,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1927,6 +1927,8 @@ struct net_device {
@@ -1934,6 +1934,8 @@ struct net_device {
struct netdev_hw_addr_list mc;
struct netdev_hw_addr_list dev_addrs;

View File

@ -11,7 +11,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1465,6 +1465,9 @@ void phy_detach(struct phy_device *phyde
@@ -1466,6 +1466,9 @@ void phy_detach(struct phy_device *phyde
struct module *ndev_owner = NULL;
struct mii_bus *bus;

View File

@ -18,7 +18,7 @@ Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -2354,6 +2354,8 @@ static const struct flash_info spi_nor_i
@@ -2356,6 +2356,8 @@ static const struct flash_info spi_nor_i
{ "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },

View File

@ -24,7 +24,7 @@ Reviewed-by: Grant Grundler <grundler@chromium.org>
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -767,6 +767,16 @@ struct xps_map {
@@ -774,6 +774,16 @@ struct xps_map {
#define XPS_MIN_MAP_ALLOC ((L1_CACHE_ALIGN(offsetof(struct xps_map, queues[1])) \
- sizeof(struct xps_map)) / sizeof(u16))
@ -41,7 +41,7 @@ Reviewed-by: Grant Grundler <grundler@chromium.org>
/*
* This structure holds all XPS maps for device. Maps are indexed by CPU.
*/
@@ -1370,6 +1380,9 @@ struct net_device_ops {
@@ -1377,6 +1387,9 @@ struct net_device_ops {
const struct sk_buff *skb,
u16 rxq_index,
u32 flow_id);

View File

@ -12,7 +12,7 @@ Subject: SoC: add qualcomm syscon
obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -183,6 +183,13 @@ config QCOM_SOCINFO
@@ -184,6 +184,13 @@ config QCOM_SOCINFO
Say yes here to support the Qualcomm socinfo driver, providing
information about the SoC to user space.

View File

@ -12,7 +12,7 @@ Subject: SoC: add qualcomm syscon
obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -183,6 +183,13 @@ config QCOM_SOCINFO
@@ -184,6 +184,13 @@ config QCOM_SOCINFO
Say yes here to support the Qualcomm socinfo driver, providing
information about the SoC to user space.

View File

@ -39,7 +39,7 @@
/* check we are the Master VPE */
local_irq_save(flags);
@@ -417,6 +418,8 @@ int __init vpe_module_init(void)
@@ -416,6 +417,8 @@ int __init vpe_module_init(void)
}
v->ntcs = hw_tcs - aprp_cpu_index();

View File

@ -10,7 +10,7 @@ Signed-off-by: Jianhua Xie <jianhua.xie@nxp.com>
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -116,6 +116,13 @@ extern pgprot_t pgprot_s2_device;
@@ -125,6 +125,13 @@ extern pgprot_t pgprot_s2_device;
#define pgprot_noncached(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)

View File

@ -224,7 +224,7 @@ This reverts commit cf9441adb1a35506d7606866c382b9d8614169b5.
priv->burst = 128; /* might be 32 or 128 */
--- a/sound/soc/mediatek/common/mtk-btcvsd.c
+++ b/sound/soc/mediatek/common/mtk-btcvsd.c
@@ -1335,8 +1335,10 @@ static int mtk_btcvsd_snd_probe(struct p
@@ -1333,8 +1333,10 @@ static int mtk_btcvsd_snd_probe(struct p
/* irq */
irq_id = platform_get_irq(pdev, 0);
@ -252,8 +252,8 @@ This reverts commit cf9441adb1a35506d7606866c382b9d8614169b5.
IRQF_TRIGGER_NONE, "asys-isr", (void *)afe);
--- a/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c
+++ b/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c
@@ -1074,8 +1074,10 @@ static int mt8173_afe_pcm_dev_probe(stru
afe->dev = &pdev->dev;
@@ -1149,8 +1149,10 @@ static int mt8173_afe_pcm_dev_probe(stru
goto err_pm_disable;
irq_id = platform_get_irq(pdev, 0);
- if (irq_id <= 0)

View File

@ -67,7 +67,7 @@ Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
obj-$(CONFIG_CRYPTO_XXHASH) += xxhash_generic.o
--- a/crypto/tcrypt.c
+++ b/crypto/tcrypt.c
@@ -2049,6 +2049,9 @@ static int do_test(const char *alg, u32
@@ -2040,6 +2040,9 @@ static int do_test(const char *alg, u32
ret += tcrypt_test("cbc(sm4)");
ret += tcrypt_test("ctr(sm4)");
break;

View File

@ -23,7 +23,7 @@ Signed-off-by: Tudor Ambarus <tudor-dan.ambarus@nxp.com>
};
static u32 block_sizes[] = { 16, 64, 256, 1024, 1472, 8192, 0 };
@@ -1983,6 +1982,10 @@ static int do_test(const char *alg, u32
@@ -1974,6 +1973,10 @@ static int do_test(const char *alg, u32
ret += tcrypt_test("hmac(streebog512)");
break;

View File

@ -378,8 +378,8 @@ Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
- memcpy(&dp->mode, adjusted, sizeof(*mode));
+ memcpy(&dp->mhdp.mode, adjusted, sizeof(*mode));
- drm_mode_copy(&dp->mode, adjusted);
+ drm_mode_copy(&dp->mhdp.mode, adjusted);
}
static bool cdn_dp_check_link_status(struct cdn_dp_device *dp)

View File

@ -11,7 +11,7 @@ Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -2420,7 +2420,7 @@ static const struct flash_info spi_nor_i
@@ -2422,7 +2422,7 @@ static const struct flash_info spi_nor_i
{ "s25fl512s", INFO6(0x010220, 0x4d0080, 256 * 1024, 256,
SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | USE_CLSR) },

View File

@ -16,7 +16,7 @@ Signed-off-by: Peter Chen <peter.chen@nxp.com>
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1270,6 +1270,17 @@ static void dwc3_get_properties(struct d
@@ -1275,6 +1275,17 @@ static void dwc3_get_properties(struct d
dwc->maximum_speed = usb_get_maximum_speed(dev);
dwc->dr_mode = usb_get_dr_mode(dev);

View File

@ -32,7 +32,7 @@ Reviewed-by: Peter Chen <peter.chen@nxp.com>
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1365,6 +1365,9 @@ static void dwc3_get_properties(struct d
@@ -1370,6 +1370,9 @@ static void dwc3_get_properties(struct d
dwc->dis_split_quirk = device_property_read_bool(dev,
"snps,dis-split-quirk");

View File

@ -54,7 +54,7 @@ Signed-off-by: Li Jun <jun.li@nxp.com>
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1040,6 +1040,21 @@ static int dwc3_core_init(struct dwc3 *d
@@ -1045,6 +1045,21 @@ static int dwc3_core_init(struct dwc3 *d
reg |= DWC3_GUCTL_HSTINAUTORETRY;
dwc3_writel(dwc->regs, DWC3_GUCTL, reg);

View File

@ -98,7 +98,7 @@ Reviewed-by: Jun Li <jun.li@nxp.com>
/**
* dwc3_core_init - Low-level initialization of DWC3 Core
* @dwc: Pointer to our controller context structure
@@ -980,6 +1028,10 @@ static int dwc3_core_init(struct dwc3 *d
@@ -985,6 +1033,10 @@ static int dwc3_core_init(struct dwc3 *d
dwc3_set_incr_burst_type(dwc);
@ -109,7 +109,7 @@ Reviewed-by: Jun Li <jun.li@nxp.com>
usb_phy_set_suspend(dwc->usb2_phy, 0);
usb_phy_set_suspend(dwc->usb3_phy, 0);
ret = phy_power_on(dwc->usb2_generic_phy);
@@ -1933,12 +1985,9 @@ static const struct dev_pm_ops dwc3_dev_
@@ -1938,12 +1990,9 @@ static const struct dev_pm_ops dwc3_dev_
#ifdef CONFIG_OF
static const struct of_device_id of_dwc3_match[] = {

View File

@ -42,7 +42,7 @@ Signed-off-by: Peter Chen <peter.chen@nxp.com>
retval = xhci_enter_test_mode(xhci, test_mode, wIndex,
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -3638,6 +3638,129 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *
@@ -3641,6 +3641,129 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *
return 0;
}
@ -174,7 +174,7 @@ Signed-off-by: Peter Chen <peter.chen@nxp.com>
* bursts that are required to move all packets in this TD. Only SuperSpeed
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -5415,6 +5415,7 @@ static const struct hc_driver xhci_hc_dr
@@ -5429,6 +5429,7 @@ static const struct hc_driver xhci_hc_dr
.disable_usb3_lpm_timeout = xhci_disable_usb3_lpm_timeout,
.find_raw_port_number = xhci_find_raw_port_number,
.clear_tt_buffer_complete = xhci_clear_tt_buffer_complete,
@ -184,7 +184,7 @@ Signed-off-by: Peter Chen <peter.chen@nxp.com>
void xhci_init_driver(struct hc_driver *drv,
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -2157,6 +2157,16 @@ int xhci_find_raw_port_number(struct usb
@@ -2162,6 +2162,16 @@ int xhci_find_raw_port_number(struct usb
struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd);
void xhci_hc_died(struct xhci_hcd *xhci);

View File

@ -32,7 +32,7 @@ Signed-off-by: Peter Chen <peter.chen@nxp.com>
ret = xhci_handshake(&xhci->op_regs->command, CMD_RESET, 0, timeout_us);
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1880,6 +1880,7 @@ struct xhci_hcd {
@@ -1881,6 +1881,7 @@ struct xhci_hcd {
#define XHCI_DEFAULT_PM_RUNTIME_ALLOW BIT_ULL(33)
#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34)
#define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35)

View File

@ -22,7 +22,7 @@ Signed-off-by: Peter Chen <peter.chen@nxp.com>
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2103,12 +2103,9 @@ static int process_ctrl_td(struct xhci_h
@@ -2106,12 +2106,9 @@ static int process_ctrl_td(struct xhci_h
switch (trb_comp_code) {
case COMP_SUCCESS:

View File

@ -24,10 +24,10 @@ Signed-off-by: Peter Chen <peter.chen@nxp.com>
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -5436,6 +5436,8 @@ void xhci_init_driver(struct hc_driver *
drv->check_bandwidth = over->check_bandwidth;
if (over->reset_bandwidth)
@@ -5452,6 +5452,8 @@ void xhci_init_driver(struct hc_driver *
drv->reset_bandwidth = over->reset_bandwidth;
if (over->update_hub_device)
drv->update_hub_device = over->update_hub_device;
+ if (over->bus_suspend)
+ drv->bus_suspend = over->bus_suspend;
}
@ -35,10 +35,10 @@ Signed-off-by: Peter Chen <peter.chen@nxp.com>
EXPORT_SYMBOL_GPL(xhci_init_driver);
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1923,6 +1923,7 @@ struct xhci_driver_overrides {
int (*start)(struct usb_hcd *hcd);
int (*check_bandwidth)(struct usb_hcd *, struct usb_device *);
@@ -1926,6 +1926,7 @@ struct xhci_driver_overrides {
void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
int (*update_hub_device)(struct usb_hcd *hcd, struct usb_device *hdev,
struct usb_tt *tt, gfp_t mem_flags);
+ int (*bus_suspend)(struct usb_hcd *hcd);
};

View File

@ -20,7 +20,7 @@ Signed-off-by: Li Jun <jun.li@freescale.com>
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -4780,7 +4780,8 @@ hub_port_init(struct usb_hub *hub, struc
@@ -4783,7 +4783,8 @@ hub_port_init(struct usb_hub *hub, struc
}
if (r) {
if (r != -ENODEV)

View File

@ -70,7 +70,7 @@ Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
/**
* dwc3_core_init - Low-level initialization of DWC3 Core
* @dwc: Pointer to our controller context structure
@@ -1028,10 +980,6 @@ static int dwc3_core_init(struct dwc3 *d
@@ -1033,10 +985,6 @@ static int dwc3_core_init(struct dwc3 *d
dwc3_set_incr_burst_type(dwc);
@ -81,7 +81,7 @@ Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
usb_phy_set_suspend(dwc->usb2_phy, 0);
usb_phy_set_suspend(dwc->usb3_phy, 0);
ret = phy_power_on(dwc->usb2_generic_phy);
@@ -1985,9 +1933,12 @@ static const struct dev_pm_ops dwc3_dev_
@@ -1990,9 +1938,12 @@ static const struct dev_pm_ops dwc3_dev_
#ifdef CONFIG_OF
static const struct of_device_id of_dwc3_match[] = {

View File

@ -97,7 +97,7 @@ Reviewed-by: Jun Li <jun.li@nxp.com>
/**
* dwc3_core_init - Low-level initialization of DWC3 Core
* @dwc: Pointer to our controller context structure
@@ -980,6 +1027,10 @@ static int dwc3_core_init(struct dwc3 *d
@@ -985,6 +1032,10 @@ static int dwc3_core_init(struct dwc3 *d
dwc3_set_incr_burst_type(dwc);
@ -108,7 +108,7 @@ Reviewed-by: Jun Li <jun.li@nxp.com>
usb_phy_set_suspend(dwc->usb2_phy, 0);
usb_phy_set_suspend(dwc->usb3_phy, 0);
ret = phy_power_on(dwc->usb2_generic_phy);
@@ -1933,12 +1984,16 @@ static const struct dev_pm_ops dwc3_dev_
@@ -1938,12 +1989,16 @@ static const struct dev_pm_ops dwc3_dev_
#ifdef CONFIG_OF
static const struct of_device_id of_dwc3_match[] = {

View File

@ -13,7 +13,7 @@ Ref: https://patchwork.ozlabs.org/project/linux-mtd/patch/20210213151047.11700-1
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -2553,6 +2553,9 @@ static const struct flash_info spi_nor_i
@@ -2555,6 +2555,9 @@ static const struct flash_info spi_nor_i
.fixups = &w25q256_fixups },
{ "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },

View File

@ -37,7 +37,7 @@ Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -134,7 +134,6 @@
@@ -137,7 +137,6 @@
status = "okay";
max-link-speed = <2>;
reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;

View File

@ -24,7 +24,7 @@ Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -132,7 +132,6 @@
@@ -135,7 +135,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
status = "okay";

View File

@ -28,7 +28,7 @@ Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -84,12 +84,23 @@
@@ -90,12 +90,23 @@
};
};
@ -52,7 +52,7 @@ Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
fixed-link {
speed = <1000>;
@@ -103,6 +114,9 @@
@@ -109,6 +120,9 @@
pinctrl-0 = <&ge1_rgmii_pins>;
status = "okay";
phy-mode = "rgmii";
@ -62,7 +62,7 @@ Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
fixed-link {
speed = <1000>;
@@ -115,6 +129,9 @@
@@ -121,6 +135,9 @@
status = "okay";
phy-mode = "sgmii";
phy = <&phy1>;

View File

@ -27,7 +27,7 @@ Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -129,6 +129,7 @@
@@ -135,6 +135,7 @@
status = "okay";
phy-mode = "sgmii";
phy = <&phy1>;

View File

@ -27,7 +27,7 @@ Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -261,13 +261,18 @@
@@ -267,13 +267,18 @@
/* Switch MV88E6176 at address 0x10 */
switch@10 {
@ -47,7 +47,7 @@ Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -320,6 +325,11 @@
@@ -336,6 +341,11 @@
marvell,function = "gpio";
};

View File

@ -33,7 +33,7 @@ Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -82,6 +82,24 @@
@@ -88,6 +88,24 @@
};
};
};
@ -58,7 +58,7 @@ Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
};
&bm {
@@ -126,10 +144,20 @@
@@ -132,10 +150,20 @@
/* WAN port */
&eth2 {
@ -79,7 +79,7 @@ Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
buffer-manager = <&bm>;
bm,pool-long = <2>;
bm,pool-short = <3>;
@@ -195,7 +223,7 @@
@@ -201,7 +229,7 @@
/* routed to PCIe2 connector (CN62A) */
};

View File

@ -29,7 +29,7 @@ Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -155,7 +155,7 @@
@@ -161,7 +161,7 @@
*/
status = "okay";
phy-mode = "sgmii";
@ -38,7 +38,7 @@ Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
phys = <&comphy5 2>;
sfp = <&sfp>;
buffer-manager = <&bm>;
@@ -278,9 +278,9 @@
@@ -284,9 +284,9 @@
pinctrl-0 = <&mdio_pins>;
status = "okay";

View File

@ -21,7 +21,7 @@ Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -31,7 +31,8 @@
@@ -37,7 +37,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000

View File

@ -10,7 +10,7 @@ Signed-off-by: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma@imgtec.com>
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -4939,6 +4939,7 @@ int spi_nor_scan(struct spi_nor *nor, co
@@ -4941,6 +4941,7 @@ int spi_nor_scan(struct spi_nor *nor, co
struct mtd_info *mtd = &nor->mtd;
struct device_node *np = spi_nor_get_flash_node(nor);
struct spi_nor_flash_parameter *params = &nor->params;
@ -18,7 +18,7 @@ Signed-off-by: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma@imgtec.com>
int ret;
int i;
@@ -5001,7 +5002,12 @@ int spi_nor_scan(struct spi_nor *nor, co
@@ -5003,7 +5004,12 @@ int spi_nor_scan(struct spi_nor *nor, co
/* Init flash parameters based on flash_info struct and SFDP */
spi_nor_init_params(nor);
@ -34,7 +34,7 @@ Signed-off-by: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma@imgtec.com>
mtd->type = MTD_NORFLASH;
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -834,6 +834,17 @@ out_error:
@@ -836,6 +836,17 @@ out_error:
*/
static void mtd_set_dev_defaults(struct mtd_info *mtd)
{

View File

@ -1,6 +1,6 @@
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -2306,6 +2306,11 @@ static const struct flash_info spi_nor_i
@@ -2308,6 +2308,11 @@ static const struct flash_info spi_nor_i
SPI_NOR_4B_OPCODES | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
.fixups = &gd25q256_fixups,
},

View File

@ -21,7 +21,7 @@ Signed-off-by: Heiko Stuebner <heiko@sntech.de>
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
@@ -684,7 +684,7 @@
@@ -683,7 +683,7 @@
&usbdrd_dwc3_0 {
status = "okay";