openwrt/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/* Copyright (c) 2021, Robert Marko <robimarko@gmail.com> */

/dts-v1/;

#include "ipq8074.dtsi"
#include "ipq8074-hk-cpu.dtsi"
#include "ipq8074-ess.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>

/ {
	model = "Xiaomi AX9000";
	compatible = "xiaomi,ax9000", "qcom,ipq8074";

	aliases {
		serial0 = &blsp1_uart5;
		led-boot = &led_system_yellow;
		led-failsafe = &led_system_yellow;
		led-running = &led_system_blue;
		led-upgrade = &led_system_yellow;
		label-mac-device = &dp5;
	};

	chosen {
		stdout-path = "serial0:115200n8";
		bootargs-append = " root=/dev/ubiblock0_0";
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};

		wps {
			label = "wps"; /* Labeled Mesh on the device */
			gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WPS_BUTTON>;
		};
	};

	leds {
		compatible = "gpio-leds";

		led_system_blue: system-blue {
			gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
			color = <LED_COLOR_ID_BLUE>;
		};

		led_system_yellow: system-yellow {
			gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
			color = <LED_COLOR_ID_YELLOW>;
		};

		network-yellow {
			gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
			color = <LED_COLOR_ID_YELLOW>;
		};

		network-blue {
			gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>;
			color = <LED_COLOR_ID_BLUE>;
		};

		top-red {
			gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
			color = <LED_COLOR_ID_RED>;
			default-state = "keep";
		};

		top-green {
			gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
			color = <LED_COLOR_ID_GREEN>;
			default-state = "keep";
		};

		top-blue {
			gpios = <&tlmm 66 GPIO_ACTIVE_HIGH>;
			color = <LED_COLOR_ID_BLUE>;
			default-state = "keep";
		};
	};
};

&tlmm {
	mdio_pins: mdio-pins {
		mdc {
			pins = "gpio68";
			function = "mdc";
			drive-strength = <8>;
			bias-pull-up;
		};

		mdio {
			pins = "gpio69";
			function = "mdio";
			drive-strength = <8>;
			bias-pull-up;
		};
	};

	i2c_pins: i2c-pins {
		pins = "gpio0", "gpio2";
		function = "blsp5_i2c";
		drive-strength = <8>;
		bias-disable;
	};
};

&blsp1_uart5 {
	status = "okay";
};

&blsp1_i2c6 {
	status = "okay";

	pinctrl-0 = <&i2c_pins>;
	pinctrl-names = "default";
};

&prng {
	status = "okay";
};

&cryptobam {
	status = "okay";
};

&crypto {
	status = "okay";
};

&qpic_bam {
	status = "okay";
};

&qpic_nand {
	status = "okay";

	/*
	 * Bootloader will find the NAND DT node by the compatible and
	 * then "fixup" it by adding the partitions from the SMEM table
	 * using the legacy bindings thus making it impossible for us
	 * to change the partition table or utilize NVMEM for calibration.
	 * So add a dummy partitions node that bootloader will populate
	 * and set it as disabled so the kernel ignores it instead of
	 * printing warnings due to the broken way bootloader adds the
	 * partitions.
	 */
	partitions {
		status = "disabled";
	};

	nand@0 {
		reg = <0>;
		nand-ecc-strength = <4>;
		nand-ecc-step-size = <512>;
		nand-bus-width = <8>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "0:sbl1";
				reg = <0x0 0x100000>;
				read-only;
			};

			partition@100000 {
				label = "0:mibib";
				reg = <0x100000 0x100000>;
				read-only;
			};

			partition@200000 {
				label = "0:bootconfig";
				reg = <0x200000 0x80000>;
				read-only;
			};

			partition@280000 {
				label = "0:bootconfig1";
				reg = <0x280000 0x80000>;
				read-only;
			};

			partition@300000 {
				label = "0:qsee";
				reg = <0x300000 0x300000>;
				read-only;
			};

			partition@600000 {
				label = "0:qsee_1";
				reg = <0x600000 0x300000>;
				read-only;
			};

			partition@900000 {
				label = "0:devcfg";
				reg = <0x900000 0x80000>;
				read-only;
			};

			partition@980000 {
				label = "0:devcfg_1";
				reg = <0x980000 0x80000>;
				read-only;
			};

			partition@a00000 {
				label = "0:apdp";
				reg = <0xa00000 0x80000>;
				read-only;
			};

			partition@a80000 {
				label = "0:apdp_1";
				reg = <0xa80000 0x80000>;
				read-only;
			};

			partition@b00000 {
				label = "0:rpm";
				reg = <0xb00000 0x80000>;
				read-only;
			};

			partition@b80000 {
				label = "0:rpm_1";
				reg = <0xb80000 0x80000>;
				read-only;
			};

			partition@c00000 {
				label = "0:cdt";
				reg = <0xc00000 0x80000>;
				read-only;
			};

			partition@c80000 {
				label = "0:cdt_1";
				reg = <0xc80000 0x80000>;
				read-only;
			};

			partition@d00000 {
				label = "0:appsblenv";
				reg = <0xd00000 0x80000>;
			};

			partition@d80000 {
				label = "0:appsbl";
				reg = <0xd80000 0x100000>;
				read-only;
			};

			partition@e80000 {
				label = "0:appsbl_1";
				reg = <0xe80000 0x100000>;
				read-only;
			};

			partition@f80000 {
				label = "0:art";
				reg = <0xf80000 0x80000>;
				read-only;

				nvmem-layout {
					compatible = "fixed-layout";
					#address-cells = <1>;
					#size-cells = <1>;

					macaddr_dp1: macaddr@0 {
						reg = <0x0 0x6>;
					};

					macaddr_dp2: macaddr@6 {
						reg = <0x6 0x6>;
					};

					macaddr_dp3: macaddr@c {
						reg = <0xc 0x6>;
					};

					macaddr_dp4: macaddr@12 {
						reg = <0x12 0x6>;
					};

					macaddr_dp5: macaddr@18 {
						reg = <0x18 0x6>;
					};

					caldata_qca9889: caldata@4d000 {
						reg = <0x4d000 0x844>;
					};
				};
			};

			partition@1000000 {
				label = "bdata";
				reg = <0x1000000 0x80000>;
			};

			partition@1080000 {
				/* This is crash + crash_syslog parts combined */
				label = "pstore";
				reg = <0x1080000 0x100000>;
			};

			partition@1180000 {
				label = "ubi_kernel";
				reg = <0x1180000 0x3800000>;
			};

			partition@4980000 {
				label = "rootfs";
				reg = <0x4980000 0xb680000>;
			};
		};
	};
};

&qusb_phy_0 {
	status = "okay";
};

&ssphy_0 {
	status = "okay";
};

&usb_0 {
	status = "okay";
};

&mdio {
	status = "okay";

	pinctrl-0 = <&mdio_pins>;
	pinctrl-names = "default";
	reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;

	ethernet-phy-package@0 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "qcom,qca8075-package";
		reg = <0>;

		qcom,package-mode = "qsgmii";

		qca8075_0: ethernet-phy@0 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <0>;

			leds {
				#address-cells = <1>;
				#size-cells = <0>;

				led@0 {
					reg = <0>;
					color = <LED_COLOR_ID_GREEN>;
					function = LED_FUNCTION_LAN;
					default-state = "keep";
				};
			};
		};

		qca8075_1: ethernet-phy@1 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <1>;

			leds {
				#address-cells = <1>;
				#size-cells = <0>;

				led@0 {
					reg = <0>;
					color = <LED_COLOR_ID_GREEN>;
					function = LED_FUNCTION_LAN;
					default-state = "keep";
				};
			};
		};

		qca8075_2: ethernet-phy@2 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <2>;

			leds {
				#address-cells = <1>;
				#size-cells = <0>;

				led@0 {
					reg = <0>;
					color = <LED_COLOR_ID_GREEN>;
					function = LED_FUNCTION_LAN;
					default-state = "keep";
				};
			};
		};

		qca8075_3: ethernet-phy@3 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <3>;

			leds {
				#address-cells = <1>;
				#size-cells = <0>;

				led@0 {
					reg = <0>;
					color = <LED_COLOR_ID_GREEN>;
					function = LED_FUNCTION_LAN;
					default-state = "keep";
				};
			};
		};
	};

	qca8081: ethernet-phy@24 {
		compatible = "ethernet-phy-id004d.d101";
		reg = <24>;
		reset-deassert-us = <10000>;
		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;

		leds {
			#address-cells = <1>;
			#size-cells = <0>;

			led@0 {
				reg = <0>;
				color = <LED_COLOR_ID_GREEN>;
				function = LED_FUNCTION_WAN;
				default-state = "keep";
			};
		};
	};
};

&switch {
	status = "okay";

	switch_lan_bmp = <(ESS_PORT1 | ESS_PORT2 | ESS_PORT3 | ESS_PORT4)>; /* lan port bitmap */
	switch_wan_bmp = <ESS_PORT5>; /* wan port bitmap */
	switch_mac_mode = <MAC_MODE_QSGMII>; /* mac mode for uniphy instance0*/
	switch_mac_mode1 = <MAC_MODE_SGMII_PLUS>; /* mac mode for uniphy instance1*/

	qcom,port_phyinfo {
		port@1 {
			port_id = <1>;
			phy_address = <0>;
		};
		port@2 {
			port_id = <2>;
			phy_address = <1>;
		};
		port@3 {
			port_id = <3>;
			phy_address = <2>;
		};
		port@4 {
			port_id = <4>;
			phy_address = <3>;
		};
		port@5 {
			port_id = <5>;
			phy_address = <24>;
			port_mac_sel = "QGMAC_PORT";
		};
	};
};

&edma {
	status = "okay";
};

&dp1 {
	status = "okay";
	phy-mode = "qsgmii";
	phy-handle = <&qca8075_0>;
	label = "lan4";
	nvmem-cells = <&macaddr_dp1>;
	nvmem-cell-names = "mac-address";
};

&dp2 {
	status = "okay";
	phy-mode = "qsgmii";
	phy-handle = <&qca8075_1>;
	label = "lan3";
	nvmem-cells = <&macaddr_dp2>;
	nvmem-cell-names = "mac-address";
};

&dp3 {
	status = "okay";
	phy-mode = "qsgmii";
	phy-handle = <&qca8075_2>;
	label = "lan2";
	nvmem-cells = <&macaddr_dp3>;
	nvmem-cell-names = "mac-address";
};

&dp4 {
	status = "okay";
	phy-mode = "qsgmii";
	phy-handle = <&qca8075_3>;
	label = "lan1";
	nvmem-cells = <&macaddr_dp4>;
	nvmem-cell-names = "mac-address";
};

&dp5 {
	status = "okay";
	phy-mode = "sgmii";
	phy-handle = <&qca8081>;
	label = "wan";
	nvmem-cells = <&macaddr_dp5>;
	nvmem-cell-names = "mac-address";
};

&pcie_qmp0 {
	status = "okay";
};

&pcie0 {
	status = "okay";

	perst-gpio = <&tlmm 58 GPIO_ACTIVE_LOW>;

	bridge@0,0 {
		reg = <0x00000000 0 0 0 0>;
		#address-cells = <3>;
		#size-cells = <2>;
		ranges;

		wifi@1,0 {
			status = "okay";

			/* ath11k has no DT compatible for PCI cards */
			compatible = "pci17cb,1104";
			reg = <0x00010000 0 0 0 0>;

			qcom,ath11k-calibration-variant = "Xiaomi-AX9000";
		};
	};
};

&pcie_qmp1 {
	status = "okay";
};

&pcie1 {
	status = "okay";

	perst-gpio = <&tlmm 62 GPIO_ACTIVE_HIGH>;

	bridge@1,0 {
		reg = <0x00010000 0 0 0 0>;
		#address-cells = <3>;
		#size-cells = <2>;
		ranges;

		wifi@1,0 {
			status = "okay";

			compatible = "qcom,ath10k";
			reg = <0x00010000 0 0 0 0>;

			qcom,ath10k-calibration-variant = "Xiaomi-AX9000";
			nvmem-cell-names = "calibration";
			nvmem-cells = <&caldata_qca9889>;
		};
	};
};

&wifi {
	status = "okay";

	qcom,ath11k-calibration-variant = "Xiaomi-AX9000";
};