2eb71d7d7a
Because batman-adv is built under backports, not a clean linux tree, the CONFIG_CFG80211 does not exist. The evaluation of IS_ENABLED() in batadv_is_cfg80211_netdev() will be false, causing the funtion to always return false. This means that the wifi_flags of an interface don't get set, causing batadv_is_wifi_hardif() to always return false. As a result, batadv_v_elp_get_throughput() never tries to get the station info from cfg80211, resulting in the following warning: batman_adv: bat0: WiFi driver or ethtool info does not provide information about link speeds on interface phy1-mesh0, therefore defaulting to hardcoded throughput values of 1.0 Mbps. So replace CONFIG_CFG80211 with CPTCFG_CFG80211, which is the correct macro to use under backports. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> |
||
---|---|---|
.github | ||
ahcpd | ||
alfred | ||
babel-pinger | ||
babeld | ||
batctl | ||
batman-adv | ||
batmand | ||
bird1 | ||
bird1-openwrt | ||
bird2 | ||
bmx6 | ||
bmx7 | ||
cjdns | ||
hnetd | ||
luci-app-bmx6 | ||
luci-app-cjdns | ||
luci-app-olsrd2 | ||
mcproxy | ||
mesh11sd | ||
minimalist-pcproxy | ||
naywatch | ||
ndppd | ||
nodogsplash | ||
ohybridproxy | ||
olsrd | ||
oonf-dlep-proxy | ||
oonf-dlep-radio | ||
oonf-init-scripts | ||
oonf-olsrd2 | ||
opennds | ||
pimbd | ||
prince | ||
quagga | ||
vis | ||
MAINTAINERS | ||
README.md |
README.md
OpenWrt Routing Feed
Description
This OpenWrt package feed contains community maintained routing packages.
Usage
This repository is intended to be layered on-top of an OpenWrt buildroot. If you do not have an OpenWrt buildroot installed, see the documentation at: OpenWrt Buildroot – Installation on the OpenWrt support site.
This feed is enabled by default. To install all its package definitions, run:
./scripts/feeds update routing
./scripts/feeds install -a -p routing