35 lines
1.1 KiB
Plaintext
35 lines
1.1 KiB
Plaintext
# The interface section allows to enable pimb on an interface.
|
|
# Several options can be enabled for the interface.
|
|
# All options are disabled by default.
|
|
#
|
|
#config interface '<interface section name>'
|
|
# option pim '<on | off>' - enable or disable pim
|
|
# option ssbidir '<on | off>' - enable or disable ssbidir
|
|
# option mld '<on | off>' - enable or disable mld
|
|
# option igmp '<on | off>' - enable or disable igmp
|
|
# option dev '<device name>' - set the device name
|
|
|
|
# The rpa section allows to configure a rendevous point.
|
|
# The interface and the networks must be configured for every rendevous.
|
|
#
|
|
#config rpa '<rendevous point name>'
|
|
# option address '<ip address>' - rendevous point address
|
|
# list prefix '<net>/<prefix length>' - prefix for the rpa
|
|
|
|
|
|
|
|
# Uncomment the following following section to enable pimb on the interface eth1.
|
|
#config interface 'ETH1'
|
|
# option pim 'on'
|
|
# option ssbidir 'on'
|
|
# option mld 'on'
|
|
# option igmp 'on'
|
|
# option dev 'eth1'
|
|
|
|
|
|
# Uncomment the following section to configure a rendevous point.
|
|
#config rpa '172_16_0_1'
|
|
# option address '172.16.0.1'
|
|
# list prefix '224.0.0.0/4'
|
|
|