You can now give a lqm when adding an interface:
ubus call olsrd add_interface '{"ifname":"wg_51821", "lqm":"0.5"}'
Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit e3c6842923)
IPC integration of olsrd with OpenWrt. Allow dynamic adding and removing
of interfaces at run-time. We need to rename the avl-tree files, since
libubox also defines avl tree. Also add patch to allow meshing via
wireguard point-to-point links.
The ubus interface offers following functions:
- add_inteface '{"ifname":"wg_51820"}'
- del_inteface '{"ifname":"wg_51820"}'
Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit 0bffe620b4)
The procd script was not adding the wireguard interfaces. Add corner case
in the init script to allow meshing via wireguard.
Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit 576967a2a3)
Wait for wireless to initialize (pending="false") to ensure
that any olsrd(6) configured interfaces and their associated
devices are up. This provides the init script the ability
to properly add all interface sections to the generated
config file /tmp/etc/olsrd(6).conf
Signed-off-by: Perry Melange <isprotejesvalkata@gmail.com>
(cherry picked from commit 0bb6aa04f6)
The plugin adds a possibility to filter out gateway HNAs. This can be
very handy e.g. for faulty nodes. A gateway can be taken out directly on
a central node and all traffic is then redirected. Also the underlying
smart gateways are adapted. Currently the link multiplier is often used
to control a faulty node, but it is not necessarily the best way to do
so.
Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit bdec65a6d9)
This increases the amount of seconds to wait before a service restart
attempt from 5 to 15 seconds and allows unlimited retries. Olsrd
sometimes crashes together with a network interface and 5 seconds can
be too short to bring back up a crashed network interface, which is
required for olsrd to restart. It also adds the ability to configure
the wait time (respawn_timeout) and the number of retries
(respawn_retry).
Signed-off-by: Tobias Schwarz <info@tobias-schwarz.com>
(cherry picked from commit bc58bd99e8)
This script originates from Freifunk Berlin. It prints a list of
all meshing neighbors known to olsrd on the command line.
Added: Error-checking for IPv4/IPv6-Hosts.
Signed-off-by: Martin Hübner <martin.hubner@web.de>
(cherry picked from commit eff944874c)
Should fix#691.
Sometimes the wifi interface is not ready before olsrd tries to access
it. This leads to warnings in the form of:
daemon.info olsrd: /etc/rc.d/S65olsrd: olsrd_write_interface()
Warning: Interface 'wireless0' not found, skipped
daemon.notice procd: /etc/rc.d/S65olsrd: olsrd: /etc/rc.d/S65olsrd:
olsrd_write_interface() Warning: Interface 'wireless0' not found, skipped
We make use of the "wait_for" procd command that allows us to wait for
the network before starting olsrd.
Tested-by: Noki
Signed-off-by: Nick Hainke <vincent@systemli.org>
As a workaround for the glibc-fix the dependency on libgps was moved
to olsrd. However, only pud is using this library.
Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit 27ac56adc6)
I am now the maintainer of olsrd. Add me also as maintainer in the
openwrt-routing feed.
Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit b455e1809a)
As mentioned in gpsd.h:
"Move gps_data_t->status to gps_fix_t.status for better fix merging"
Commit:
29991d6ffe
Signed-off-by: Nick Hainke <vincent@systemli.org>
With the upgrade to bison 3.7.1 (openwrt commit 1cf842d) building
olsrd was failing. Now, instead of the contents of header files
being directly inserted into the generated source files, they are
instead included with a #include directive.
The local.mk has, until now, done some magic with *-tmp files,
which is not longer necessary and even causes builds to fail.
src/cfgparser/oparse.c:265:10: fatal error: oparse.h-tmp: No such file or directory
#include "oparse.h-tmp"
Suggested-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Perry Melange <isprotejesvalkata@gmail.com>
This is a very basic cleanup, several packages needs more work
but this at least drops git for https and removes the use of
PKG_MD5SUM and some minor fixes.
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
This patch bumps olsr version from 0.9.6.1 to 0.9.6.2
One major bugfix comes with the newer version, which is quite relevant
for our Freifunk mesh network: the feature LinkQualityMult was not
working in 0.9.6.1 and got fixed in the new version.
Tested on 92 productive mesh nodes running current LEDE trunk .
Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
introduced in 059b26c2 in 2011-nov-14 ("Manuel Munz freifunk@somakoma.de modified init
file of olsrd with improvements for 6and4 operation and also for setup of smartgw")
overload init-skript's olsrd_write_loadplugin() with new function
find_most_recent_plugin_libary() - so now we can mix 'exact' and lazy
names. This change is backward compatible and now we have a better
migration strategy. This topic was hot again, after the latest updates
of a lot of plugins, resulting in non-working configs...
It's announced since several years, that such setups (one
olsrd running IPv4 and IPv6) will no be supported anymore.
See 4b06c42f97
(olsrd: splitting IPv6/4 configuration and start scripts)
Signed-off-by: Sven Roederer <freifunk@it-solutions.geroedel.de>
Nick Hainke