Maintainer: Rob White rob@blue-wave.net
Compile tested: All
Run tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, x86-64, on 21.02, 22.03 and snapshot.
Description:
* This version adds new functionality.
* Update README.md
* Add - Traffic volume, Peers and stations to status output [bluewavenet]
* Add - limit up-checks to mesh interfaces only [bluewavenet]
-- Rob White <dot@blue-wave.net> Mon, 08 Aug 2022 13:40:31 +0000
Signed-off-by: Rob White <rob@blue-wave.net>
(cherry picked from commit 290ed82bd8)
Maintainer: Rob White rob@blue-wave.net
Compile tested: All
Run tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, x86-64, on 21.02.2 and snapshot.
Description:
* This version adds new functionality, and fixed some issues
* Fix - repeated syslog messages - output only on mode change [bluewavenet]
* Add - service status to json output [bluewavenet]
* Add - support for multiple mesh interfaces [bluewavenet]
* Fix - duplicate ifname if more than one mesh interface [bluewavenet]
* Add - compatibility with iw < v5.16-1 [bluewavenet]
* Add - search and delete phantom meshnodes [bluewavenet]
Signed-off-by: Rob White <rob@blue-wave.net>
(cherry picked from commit 1cd90655da)
Maintainer: Rob White rob@blue-wave.net
Compile tested: All
Run tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, x86-64, on 21.02.2
Description:
Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
Settings take effect immediately without having to restart the wireless network.
Default settings give rapid and reliable layer 2 mesh convergence.
Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
The mesh11sd daemon dynamically checks configured parameters and sets them as required.
This version does not require a Captive Portal to be running.
Signed-off-by: Rob White <rob@blue-wave.net>
(cherry picked from commit b4ab896894)
Rob White