There are two reasons why there should be no peers.
Meshrouter without wan or no peers in hoodfile for a protocol.
With this patch there is only one condition left for vpn-start-stop.
Peers present or not. And it is less complicated to implement start/stop.
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Acked-by: Fabian Bläse <fabian@blaese.de>
COMMITCOUNT allows to have the PKG_RELEASE calculated automatically
based on the number of commits for the package folder.
AUTORELEASE will count the number of commits since the last upstream
bump. This is relevant for packages with PKG_VERSION or
PKG_SOURCE_DATE set, but will not work for us since it assumes the
use of certain identifiers in commit titles.
COMMITCOUNT works fine for most of our packages, with the following
exceptions:
* fff-nodewatcher would yield a commit count of 55, while the
current PKG_RELEASE is 61. Thus, we do not touch it for now.
* Packages that have been renamed will start counting from 1 after
the rename, since folder renames are not tracked by git. This
will result in descreasing PKG_RELEASE after the change for
these packages.
However, since moving essentially creates a new package anyway,
counting from 1 makes sense conceptually, and PKG_RELEASE is
still replaced for these packages.
* alfred-json and fff-macnock use upstream code and thus would
normally require AUTORELEASE. As discussed above, this will
not work for us, so just leave these two untouched.
Note that all this is quite irrelevant for the way we use packages
currently, as without opkg PKG_RELEASE does not matter to us anyway.
So, let's just be happy about not having to bump PKG_RELEASE
anymore, while keeping the basic functionality intact.
The only package where the PKG_RELEASE is actually used for
something is fff-nodewatcher, where the version will be displayed
in the Monitoring.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[fabian@blaese.de: rebase, add new packages]
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Johannes Kimmel <fff@bareminimum.eu>
This rewrite makes vpn-select modular to easely add new vpn-protocols.
The stuff dependent on the vpn-protocol is outsourced to files in /usr/lib/vpn-select.d/ and comes in with the respective vpn package. In this way it is easy to select or deselect vpnprotocols to be build in.
vpn-stop is removed to use the protocol independent start/stop mechanism of vpn-select. Instead, a symlink is used.
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
PKG_BUILD_DIR has the following default values set in include/package.mk,
in case no BUILD_VARIANT is set:
With PKG_VERSION set: $(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
Without PKG_VERSION: $(BUILD_DIR)/$(PKG_NAME)
Consequently, all PKG_BUILD_DIR definitions in our packages are
redundant. Remove them.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Build/Prepare and Build/Configure are not required for packages
which only contain local files and do not need any compilation.
Remove them.
Note that Build/Compile needs to be present and empty to overwrite
the defaults, though.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Some packages contain a whitespace at the start of TITLE, some
don't. This is completely irrelevant since Make strips leading
and trailing spaces anyway. Nevertheless, make it consistent.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
This is a purely cosmetic change to enhance the readability
of the function.
Also add some empty lines and comments for overview.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
The symbols BUSYBOX_CONFIG_WGET and
BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT are set in different
packages and do not correlate with where Busybox wget is
actually used.
This updates packages dependencies based on the current
situation.
Note that with current firmware, both two versions of wget
are installed:
/bin/wget
/usr/bin/wget
The latter is from busybox and is used as the default version.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
PKG_VERSION is meant to refer to the version of external packages,
as we do e.g. in the tunneldigger package.
For our own packages, we just need the PKG_RELEASE variable.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
[Rebased onto current state of master]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Currently, Makefile use a mixture of tabs and spaces with various
indents. This harmonizes all Makefiles to use tab indentation only.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
The "ipv4" option is used to enforce using ipv4 when
using dns for fastd remotes.
However this option was incorrectly always set which
makes ipv6 connections impossible.
Because enforcing ipv4 is not necessary, this option
is removed.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Tested-by: Fabian Bläse <fabian@blaese.de>
By removing the reference to the hood file from vpn-select, we
remove the entire dependency from fff-hoodutils.
vpn-select will now work with any file provided, as long as
it has the correct syntax. At the moment, the only provider
is the configurehood script. Since the various hood file variants
are handled there, it seems logical that configurehood also
chooses and provides the correct hood file for vpn-select, instead
of vpn-select which had no other contact with hood file choice.
This is simple, tidy and effective.
Adjusted some comments.
Fixes#106
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
== is a bash specific alias for = , and
should not be used in #!/bin/sh scripts. Not in #!/usr/bin/haserl scripts
either, where the shell defaults to /bin/sh.
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
- rebased
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
The simplest and fasted way to
Fixes#72
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Since names may change, this puts the relevant file names for
hood files into variables, so they can be changed at once
without the risk of forgetting some occurrences.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Since there is a PKG_NAME variable, there is no need to repeat
the individual package name five times.
This makes editing and particularly copying Makefiles much
easier, as only the PKG_NAME has to be changed.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This is a first consolidation step which gets rid of
/tmp/fastd_fff_output, but still requires /etc/fastd/fff/peers/*
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This package connects to keyxchangev2
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
we need some little changes and copy some things to fff-hood later
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Bug: If /tmp/run/fastd.${project}.pid is missing, the directory
/proc/ is checked instead of /proc/{something}.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Fixes: #41
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
The current broker is no longer cutting off the first character from UUID
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Steffen Pankratz <kratz00@gmx.de>
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Jan Kraus <mayosemmel@gmail.com>
Robert Langhammer
Adrian Schmutzler
Fabian Bläse
Christian Dresel