buildscript

@@ -15,7 +15,7 @@ ROUTINGREV="2baff33918c089fd3744c7192f8ae7a29c47a8d7"
 GLUONREV="12e41d0ff07ec54bbd67a31ab50d12ca04f2238c"
 
 OPENWRT_PKGS="gpioctl-sysfs libugpio fastd haserl micrond mtr bmon"
-ROUTING_PKGS="kmod-batman-adv batctl alfred babeld"
+ROUTING_PKGS="kmod-batman-adv batctl alfred babeld bird2"
 GLUON_PKGS="simple-tc uradvd"
 
 FFF_VARIANTS="node layer3"

src/packages/fff/fff-babel-bird2/Makefile

@@ -0,0 +1,29 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=fff-babel-bird2
+PKG_RELEASE:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/fff-babel-bird2
+	SECTION:=base
+	CATEGORY:=Freifunk
+	TITLE:=Freifunk-Franken babel-bird2
+	URL:=https://www.freifunk-franken.de
+	DEPENDS:=+bird2 +bird2c
+	PROVIDES:=fff-babel-implementation
+endef
+
+define Package/fff-babel-bird2/description
+	This is the Freifunk Franken Firmware babel-bird2 package.
+endef
+
+define Build/Compile
+	# nothing
+endef
+
+define Package/fff-babel-bird2/install
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,fff-babel-bird2))

src/packages/fff/fff-babel-bird2/files/etc/bird-babel-include.conf

@@ -0,0 +1 @@
+include "/etc/bird-babel/*.conf";

src/packages/fff/fff-babel-bird2/files/etc/bird-fff.conf

@@ -0,0 +1,117 @@
+# router id is not required for babeld, but necessary for bird startup
+router id 192.0.2.0;
+
+ipv4 table fff4;
+ipv6 sadr table fff6;
+
+protocol device {
+	scan time 15;
+}
+
+# device routes for ipv4 peering address
+protocol direct {
+	ipv4 {
+		table fff4;
+		import filter {
+			if (net ~ 10.50.0.0/16 || net ~ 10.83.0.0/16) && net.len = 32 then {
+				accept;
+			}
+			reject;
+		};
+	};
+}
+
+# device routes on loopback interface
+protocol direct {
+	ipv4 {
+		table fff4;
+		import filter {
+			if net ~ 10.50.0.0/16 || net ~ 10.83.0.0/16 then {
+				accept;
+			}
+			reject;
+		};
+	};
+
+	ipv6 sadr {
+		table fff6;
+		import filter {
+			if net ~ fdff::/64 from ::/0 then {
+				reject;
+			}
+
+			# only import GUA + ULA addresses
+			if net !~ 2000::/3 from ::/0  || net !~ fc00::/7 from ::/0 then {
+				reject;
+			}
+
+			accept;
+		};
+		import keep filtered;
+	};
+
+	interface "lo";
+}
+
+# ipv6 kernel route interface
+protocol kernel {
+	ipv6 sadr {
+		table fff6;
+		import filter {
+			# only import routes from kernel with proto static
+			if krt_source != 4 then {
+				reject;
+			}
+
+			if net ~ fdff::/64 from ::/0 then {
+				reject;
+			}
+
+			accept;
+		};
+		export all;
+		preference 200;
+	};
+	kernel table 10;
+	scan time 15;
+	learn yes;
+}
+
+# ipv4 kernel route interface
+protocol kernel {
+	ipv4 {
+		table fff4;
+		import filter {
+			# only import routes from kernel with proto static
+			if krt_source = 4 then {
+				accept;
+			}
+			reject;
+		};
+		export all;
+		preference 200;
+	};
+	kernel table 10;
+	scan time 15;
+	learn yes;
+}
+
+protocol babel {
+	# required due to static configuration of global router id.
+	# also improves reconnect speed after restart.
+	randomize router id yes;
+
+	ipv4 {
+		table fff4;
+		import all;
+		export all;
+	};
+
+	ipv6 sadr {
+		table fff6;
+		import all;
+		export all;
+	};
+
+	include "/etc/bird-babel-include.conf";
+};

src/packages/fff/fff-babel-bird2/files/etc/uci-defaults/30-disable-bird2

@@ -0,0 +1,3 @@
+/etc/init.d/bird disable
+
+exit 0

src/packages/fff/fff-babel-bird2/files/etc/uci-defaults/60-fff-bird-config

@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-3.0-only
+
+mv /etc/bird-fff.conf /etc/bird.conf
+
+exit 0

src/packages/fff/fff-babel-bird2/files/lib/functions/fff/babeldaemon/bird2

@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-3.0-only
+
+babel_add_interface() {
+	[ "$#" -ne "4" ] && return 1
+
+	local name="$1"
+	local interface="$2"
+	local type="$3"
+	local rxcost="$4"
+
+	mkdir -p /tmp/bird-babel
+	echo "interface \"$interface\" { type $type; rxcost $rxcost; };" > /tmp/bird-babel/$name.conf
+
+	return 0
+}
+
+babel_delete_interface() {
+	[ "$#" -ne "1" ] && return 1
+
+	local name="$1"
+
+	# Removing peers from /etc is not necessary, as all peers are generated into /tmp on every configuration run,
+	# which completely overwrites existing peers in /etc in the apply step.
+	rm -f /tmp/bird-babel/$name.conf
+
+	return 0
+}
+
+babel_add_redistribute_filter() {
+	return 0
+}
+
+babel_remove_custom_redistribute_filters() {
+	return 0
+}
+
+babel_apply() {
+	# error output hidden because apply might be executed without a preceding configure step.
+	if [ -d /tmp/bird-babel ]; then
+		rm -rf /etc/bird-babel
+		mv /tmp/bird-babel /etc/bird-babel
+	fi
+
+	return 0
+}
+
+babel_reload_implementation() {
+	# Change include file path, so bird uses the correct configuration, depending on the configuration state:
+	#  - If test mode is active (and /tmp/bird-babel exists), switch to the temporary (/tmp) configuration to be tested.
+	#  - If new settings are applied or the old settings are restored after an unsuccessful test (and /tmp/bird-babel does not exist),
+	#    switch back to the permanent configuration (/etc).
+	if [ -d /tmp/bird-babel ]; then
+		echo 'include "/tmp/bird-babel/*.conf";' > /etc/bird-babel-include.conf
+	else
+		echo 'include "/etc/bird-babel/*.conf";' > /etc/bird-babel-include.conf
+	fi
+
+	/etc/init.d/bird reload
+}
+
+babel_revert() {
+	rm -r /tmp/bird-babel
+}

src/packages/fff/fff-babel-bird2/files/usr/lib/nodewatcher.d/80-bird2.sh

@@ -0,0 +1,14 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-3.0-only
+
+set -e
+set -o pipefail
+
+neighbours="$(birdc -r show babel neighbors |
+		tail -n +5 |
+		awk '{ printf "<neighbour><ip>%s</ip><outgoing_interface>%s</outgoing_interface><link_cost>%s</link_cost></neighbour>", $1, $2, $3 }'
+	)"
+
+echo -n "<babel_neighbours>$neighbours</babel_neighbours>"
+
+exit 0

src/packages/fff/fff-babel/Makefile

@@ -0,0 +1,28 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=fff-babel
+PKG_RELEASE:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/fff-babel
+	SECTION:=base
+	CATEGORY:=Freifunk
+	TITLE:=Freifunk-Franken babel
+	URL:=https://www.freifunk-franken.de
+	DEPENDS:=+fff-babel-implementation
+endef
+
+define Package/fff-babel/description
+	This is the Freifunk Franken Firmware babel package.
+endef
+
+define Build/Compile
+	# nothing
+endef
+
+define Package/fff-babel/install
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,fff-babel))

src/packages/fff/fff-babel/files/etc/layer3.d/40-babel

@@ -26,7 +26,7 @@ configure() {
 		fi
 	}
 
-	config_load babeld
+	config_load network
 	config_foreach remove_babelpeer interface
 
 	#add new peers
@@ -75,14 +75,14 @@ configure() {
 		babel_add_peer6addr "network.$prefixname.ip6addr"
 
 		# add babel interface
-		babel_add_interface "$prefixname" "$iface" "$type" "$rxcost" || { echo "Could not add babeld interface for babelpeer $name"; exit 1; }
+		babel_add_interface "$prefixname" "$iface" "$type" "$rxcost" || { echo "Could not add babel interface for babelpeer $name"; exit 1; }
 	}
 
 	config_load gateway
 	config_foreach add_babelpeer babelpeer
 
 
-	# configure babeld filters for custom ipv6 addresses
+	# configure babel filters for custom ipv6 addresses
 	## remove old filters
 	babel_remove_custom_redistribute_filters
 
@@ -94,10 +94,14 @@ configure() {
 
 apply() {
 	uci commit network
-	uci commit babeld
+	babel_apply
+}
+
+reload() {
+	babel_reload
 }
 
 revert() {
 	uci revert network
-	uci revert babeld
+	babel_revert
 }

src/packages/fff/fff-babel/files/lib/functions/fff/babel

@@ -1,3 +1,7 @@
+
+implementation=babeld
+. /lib/functions/fff/babeldaemon/$implementation
+
 babel_add_iifrules() {
 	[ "$#" -ne "1" ] && return 1
 
@@ -61,61 +65,25 @@ babel_add_peer6addr() {
 	return 0
 }
 
-babel_add_interface() {
-	[ "$#" -ne "4" ] && return 1
+babel_reload() {
+	# switch implementation
+	case $implementation in
+		bird2)
+			/etc/init.d/babeld stop 2>/dev/null
+			/etc/init.d/babeld disable
+			/etc/init.d/bird enable
+			/etc/init.d/bird start
+			;;
+		babeld)
+			/etc/init.d/bird stop 2>/dev/null
+			/etc/init.d/bird disable
+			/etc/init.d/babeld enable
+			/etc/init.d/babeld start
+			;;
+	esac
 
-	local name="$1"
-	local interface="$2"
-	local type="$3"
-	local rxcost="$4"
-
-	uci set babeld.$name=interface
-	uci set babeld.$name.ifname="$interface"
-	uci set babeld.$name.type="$type"
-	uci set babeld.$name.rxcost="$rxcost"
-
-	return 0
-}
-
-babel_delete_interface() {
-	[ "$#" -ne "1" ] && return 1
-
-	local name="$1"
-
-	uci -q del babeld.$name
-
-	return 0
-}
-
-babel_add_redistribute_filter() {
-	[ "$#" -ne "1" ] && return 1
-
-	local prefix="$1"
-
-	config=$(uci add babeld filter)
-	uci set babeld.$config.type='redistribute'
-	uci set babeld.$config.ip="$prefix"
-	uci set babeld.$config.addedbyautoconfig='true'
-
-	return 0
-}
-
-babel_remove_custom_redistribute_filters() {
-	[ "$#" -ne "0" ] && return 1
-
-	remove_filters() {
-		local name="$1"
-
-		# check if filter was added by configuregateway
-		if ! [ "$(uci -q get babeld.$name.addedbyautoconfig)" = 'true' ]; then
-			return
-		fi
-
-		uci -q del babeld.$name
-	}
-
-	config_load babeld
-	config_foreach remove_filters filter
+	# call implementation-specific reload commands
+	babel_reload_implementation
 
 	return 0
 }

src/packages/fff/fff-babeld/Makefile

@@ -11,6 +11,7 @@ define Package/fff-babeld
 	TITLE:=Freifunk-Franken babeld configuration example
 	URL:=http://www.freifunk-franken.de
 	DEPENDS:=+babeld
+	PROVIDES:=fff-babel-implementation
 endef
 
 define Package/fff-babeld/description

src/packages/fff/fff-babeld/files/etc/uci-defaults/30-disable-babeld

@@ -0,0 +1,3 @@
+/etc/init.d/babeld disable
+
+exit 0

src/packages/fff/fff-babeld/files/lib/functions/fff/babeldaemon/babeld

@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-3.0-only
+
+babel_add_interface() {
+	[ "$#" -ne "4" ] && return 1
+
+	local name="$1"
+	local interface="$2"
+	local type="$3"
+	local rxcost="$4"
+
+	uci set babeld.$name=interface
+	uci set babeld.$name.ifname="$interface"
+	uci set babeld.$name.type="$type"
+	uci set babeld.$name.rxcost="$rxcost"
+
+	return 0
+}
+
+babel_delete_interface() {
+	[ "$#" -ne "1" ] && return 1
+
+	local name="$1"
+
+	uci -q del babeld.$name
+
+	return 0
+}
+
+babel_add_redistribute_filter() {
+	[ "$#" -ne "1" ] && return 1
+
+	local prefix="$1"
+
+	config=$(uci add babeld filter)
+	uci set babeld.$config.type='redistribute'
+	uci set babeld.$config.ip="$prefix"
+	uci set babeld.$config.addedbyautoconfig='true'
+
+	return 0
+}
+
+babel_remove_custom_redistribute_filters() {
+	[ "$#" -ne "0" ] && return 1
+
+	remove_filters() {
+		local name="$1"
+
+		# check if filter was added by configuregateway
+		if ! [ "$(uci -q get babeld.$name.addedbyautoconfig)" = 'true' ]; then
+			return
+		fi
+
+		uci -q del babeld.$name
+	}
+
+	config_load babeld
+	config_foreach remove_filters filter
+
+	return 0
+}
+
+babel_apply() {
+	uci commit babeld
+}
+
+babel_reload_implementation() {
+	return 0
+}
+
+babel_revert() {
+	uci revert babeld
+}

src/packages/fff/fff-layer3/Makefile

@@ -11,7 +11,9 @@ define Package/fff-layer3
 	TITLE:=Freifunk-Franken gateway configuration
 	URL:=https://www.freifunk-franken.de
 	DEPENDS:=+fff-alfred-monitoring-proxy \
+	         +fff-babel \
 	         +fff-babeld \
+	         +fff-babel-bird2 \
 	         +fff-boardname \
 	         +fff-dhcp \
 	         +fff-layer3-config \

src/packages/fff/fff-nodewatcher/files/usr/lib/nodewatcher.d/10-systemdata.sh

@@ -76,6 +76,8 @@ fi
 
 if [ -x /usr/sbin/babeld ]; then
 	SYSTEM_DATA="$SYSTEM_DATA<babel_version>$(/usr/sbin/babeld -V 2>&1)</babel_version>"
+elif [ -x /usr/sbin/bird ]; then
+	SYSTEM_DATA="$SYSTEM_DATA<babel_version>$(/usr/sbin/bird --version 2>&1 | sed "s/BIRD version /bird-/")</babel_version>"
 fi
 
 # example for /etc/openwrt_release:

src/packages/fff/fff-wireguard/Makefile

@@ -14,7 +14,7 @@ define Package/fff-wireguard
 		+kmod-wireguard \
 		+owipcalc \
 		+wireguard-tools \
-		+fff-babeld \
+		+fff-babel \
 		+fff-network
 endef
 

src/packages/fff/fff-wireguard/files/etc/layer3.d/50-wireguard

@@ -30,7 +30,7 @@ configure() {
 		fi
 	}
 
-	config_load babeld
+	config_load network
 	config_foreach remove_wgpeer interface
 
 
@@ -127,7 +127,7 @@ configure() {
 		babel_add_iifrules "$prefixname" || { echo "ERROR: Could not add iif-rules for wgpeer $name"; exit 1; }
 
 		# add babel interface
-		babel_add_interface "$prefixname" "$prefixname" 'wired' "$rxcost" || { echo "ERROR: Could not add babeld interface for wgpeer $name"; exit 1; }
+		babel_add_interface "$prefixname" "$prefixname" 'wired' "$rxcost" || { echo "ERROR: Could not add babel interface for wgpeer $name"; exit 1; }
 	}
 
 	config_load gateway
@@ -136,12 +136,16 @@ configure() {
 
 apply() {
 	uci commit network
-	uci commit babeld
 	uci commit gateway
+	babel_apply
+}
+
+reload() {
+	babel_reload
 }
 
 revert() {
 	uci revert network
-	uci revert babeld
 	uci revert gateway
+	babel_revert
 }