With the current OpenWrt patches, both CPE210 v2 and v3 can be
flashed with each other's images. Introduce a separate entry
in tplink_safeloader.c to prevent crossflashing.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Removing the tunneldigger, this patch is no longer needed.
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
It is not always necessary to add a host route for the gre peer address.
This introduces a new config option 'nohostroute' (similar to the
option introduced for wireguard in d8e2e19) to allow to disable
the creation of those routes explicitely.
This is a backport from OpenWrt master.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
OpenWrt saves additional config (and other) files included with
list_changed_conffiles in /sbin/sysupgrade.
This is only active since openwrt-18.06, since before that it was
suppressed by missing opkg.
Since we expect to only save what is in sysupgrade.conf, remove the
additional file list (and thus regain pre-openwrt-18.06
behavior).
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
When using IPv6 addresses (or DNS which has AAAA record) as endpoint,
add_host_dependency fails for some reason which causes the wireguard
interface to disappear.
This patch backports an option from OpenWrt master, where
host_dependency can be disabled by adding 'option nohostroute 1'
to the interface.
This is an alternate approach based on the work of Fabian Bläse.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
The buildscript knows two different types of patches, which are
applied to pulled-in repositories:
1. Feed patches
Those are applied as "GIT patches" to the relevant repos,
directly after those have been checked out.
They reside in subfolders of the build_patches folder, and
have to be selected individually and manually in the
buildscript.sh.
2. Build patches
Those are applied later in the process, just using the system
patch tool, and changing the $target directory.
All patches in the folder "build_patches/openwrt" are read
and applied automatically.
This is both inconsistent (two different types of patches in
the same dir) and annoying (feed patches have to be specified
by hand), especially for unexperienced developers.
This patch addresses this by:
- separating files into two dirs: build_patches and feed_patches
- automatically scanning feed patches and thus having similar
experience for the user (I cannot think of a case where we
provide a patch, but do not use it)
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Refresh patches.
This introduces backported BATMAN fixes up to v2019.0.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This device is still in PR state in OpenWrt, since ar71xx target
is deprecated and thus lacking reviewers.
It worked nicely for me anyway, so I include the current state of
the PR (has not changed for months).
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Refresh patches.
Bumps batman-adv to 2018.1
This goes beyond 18.06.0 since the release contains bug which
have been fixed in the later snapshots.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
[fabian@blaese.de: Use 18.06.1 for OpenWRT and packages]
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This patch suppresses the messages batman writes to
the kernel log when gw_mode is changed. This is done
to avoid spamming the log with negligible messages
when gw_mode is switched frequently.
Fixes: #93
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This patch allows to modify the bs-partition on the AC Mesh.
Without the patch, the bs partition on the AC Mesh is locked
forever. This can be a problem if
a) the bs partition has not been updated correctly during initial flash
b) the sysupgrade mechanism is altered by OpenWRT in order to account for
the flip flop layout
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Occationally /proc/net/if_inet6 contains interface IDs with
three digits. In this case, the regex in wait_for_ll_address()
does not work anymore and alfred is not starting.
This patch changes the evaluation so that fields are used instead
of the mere position by counting characters.
This is a backport from openwrt-routing and can be removed when
updating to OpenWRT 18.06, but not for newer versions of 17.01.
Fixes#98.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhgammer <rlanghammer@web.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Since the reverted patch, device specific antenna gain is not set for some reason.
Reverting the patch in question fixes this issue.
THIS SHOULD BE ONLY CONSIDERD AS A TEMPORARY FIX UNTIL THE ISSUE IS FIXED PROPERLY!
Fixes: #85
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Tested-by: Fabian Bläse <fabian@blaese.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
We do not use encrypted tunnels, so we can use urandom generating the keys to prevent blocking due to low entropy.
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
This is based on the LEDE pull request as on 2017-10-17.
Tested successfully on device (including flashing factory
image, no TFTP).
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Fixes: #55
This reintroduces the broken simple-tc.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
With git am format, it is easier to apply the patches locally.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Like in the earlier patch, this suppresses the integer overflow
warning for l2tp on 32 bit systems. However, like before, the
underlying counter variable is still a 32-bit integer, so the
traffic counters will just restart at zero after reaching
2^32 bytes = 4 GiB.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Reviewed-by: Dominik Heidler <dominik@heidler.eu>
Currently it seems to be more work to fix the ip validation in
ubox project (validate/validate.c). Therefore we just validate it
as string.
Fixes#9
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Fixes#16
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Tested-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Tested-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
This patch massivly improves the wireless performance of CPE210
Signed-off-by: Tobias Klaus <tk+ff@meskal.net>
Tested-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
It has applied to the wrong directory, so the error was still there.
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Tested-by: Robert Langammer <rlanghammer@web.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Mainly bcm53xx fixes have been introduced
But also two main changes for us:
* The fix for Nanostation/Picostation is now mainline
-> remove ar71xx-make-bootconsole-wait-for-both-THRE-and-TEMT.patch
* WR841v11 is now in upstream
-> remove ar71xx-Add-TL-WR841N-ND-v11-support.patch
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
CC: Tobias Klaus <tk+ff@meskal.net>
Reviewed-by: Steffen Pankratz <kratz00@gmx.de>
* adds openwrt patch
* adds networkconfig
power-LED is not working
Signed-off-by: Tobias Klaus <tk+ff@meskal.net>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Fix the Race Condition on boot
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Ralph A. Schmid, dk5ras <ralph@schmid.xxx>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
The 32 bit counter was incorrectly interpreted as signed
when being converted to the 64 bit value used for the
sysfs output.
Signed-off-by: Dominik Heidler <dominik@heidler.eu>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
[rebased to master, rename patch and remove buildscript part]
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
New version is c75367d20240da182fcbdb68c8cce64eabd71ac5
- Security fixes (glibc)
- Kernel update 3.18.27
- ar71xx: ethernet fixes
- mac80211: new version
- support WR741v5
- odhcp6c: minor fixes
- support WR741v5, WR1043v3, WR941v6
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
I discovered some batman-adv problems with the gateway selection.
Sometimes just the wrong gateway was selected. The gluon project added
some batman-adv patches which deal with gateway selection problems.
Signed-off-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
Reviewed-by: Steffen Pankratz <kratz00@gmx.de>
* Simplifies adding new feeds and packages
* Better separation of implementation and configuration
* get rid of having to modifiy another file when adding
feeds(build_patches/feed.conf)