openwrt/target/linux/ath79/patches-6.1/910-mikrotik-rb4xx.patch

122 lines
4.4 KiB
Diff

From: Christopher Hill <ch6574@gmail.com>
Subject: [PATCH] ath79: add Mikrotik rb4xx series drivers
This adds 3 Mikrotik rb4xx series drivers as follows:
rb4xx-cpld: This is in the mfd subsystem, and is the parent CPLD device
that interfaces between the SoC SPI bus and its two children below.
rb4xx-gpio: This is the GPIO expander.
rb4xx-nand: This is the NAND driver.
The history of this code comes in three phases.
1. The first is a May 2015 attempt to push the equivalient ar71xx rb4xx
drivers upstream. See https://lore.kernel.org/patchwork/patch/940880/.
Module-author: Gabor Juhos <juhosg@openwrt.org>
Module-author: Imre Kaloz <kaloz@openwrt.org>
Module-author: Bert Vermeulen <bert@biot.com>
2. Next several ar71xx patches were applied bringing the code current.
commit 7bbf4117c6fe4b764d9d7c62fb2bcf6dd93bff2c
Submitted-by: Hauke Mehrtens <hauke@hauke-m.de>
commit af79fdbe4af32a287798b579141204bda056b8aa
commit 889272d92db689fd9c910243635e44c9d8323095
commit e21cb649a235180563363b8af5ba8296b9ac0baa
commit 7c09fa4a7492ca436f2c94bd9a465b7c5bbeed6f
Submitted-by: Felix Fietkau <nbd@nbd.name>
3. Finally a heavy refactor to split the driver into the three new
subsystems, and updated to work with the device tree configuration, plus
updates and review feedback incorporated
Reviewed-by: Thibaut VARÈNE <hacks@slashdirt.org>
Submitted-by: Christopher Hill <ch6574@gmail.com>
---
drivers/mfd/Kconfig | 8 ++++++++
drivers/mfd/Makefile | 1 +
drivers/gpio/Kconfig | 6 ++++++
drivers/gpio/Makefile | 1 +
drivers/mtd/nand/raw/Kconfig | 7 +++++++
drivers/mtd/nand/raw/Makefile | 1 +
6 files changed, 24 insertions(+)
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2209,6 +2209,14 @@ config RAVE_SP_CORE
Select this to get support for the Supervisory Processor
device found on several devices in RAVE line of hardware.
+config MFD_RB4XX_CPLD
+ tristate "CPLD driver for Mikrotik RB4xx series boards"
+ select MFD_CORE
+ depends on ATH79 || COMPILE_TEST
+ help
+ Enables support for the CPLD chip (NAND & GPIO) on Mikrotik
+ Routerboard RB4xx series.
+
config SGI_MFD_IOC3
bool "SGI IOC3 core driver"
depends on PCI && MIPS && 64BIT
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -269,6 +269,7 @@ obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-
obj-$(CONFIG_MFD_ACER_A500_EC) += acer-ec-a500.o
obj-$(CONFIG_MFD_QCOM_PM8008) += qcom-pm8008.o
+obj-$(CONFIG_MFD_RB4XX_CPLD) += rb4xx-cpld.o
obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o
obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1593,6 +1593,12 @@ config GPIO_SODAVILLE
help
Say Y here to support Intel Sodaville GPIO.
+config GPIO_RB4XX
+ tristate "GPIO expander for Mikrotik RB4xx series boards"
+ depends on MFD_RB4XX_CPLD
+ help
+ GPIO driver for Mikrotik Routerboard RB4xx series.
+
endmenu
menu "SPI GPIO expanders"
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -123,6 +123,7 @@ obj-$(CONFIG_GPIO_PL061) += gpio-pl061.
obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio-pmic-eic-sprd.o
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RASPBERRYPI_EXP) += gpio-raspberrypi-exp.o
+obj-$(CONFIG_GPIO_RB4XX) += gpio-rb4xx.o
obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
obj-$(CONFIG_GPIO_RDA) += gpio-rda.o
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -565,4 +565,11 @@ config MTD_NAND_AR934X
Enables support for NAND controller on Qualcomm Atheros SoCs.
This controller is found on AR934x and QCA955x SoCs.
+config MTD_NAND_RB4XX
+ tristate "Support for NAND driver for Mikrotik RB4xx series boards"
+ depends on MFD_RB4XX_CPLD
+ help
+ Enables support for the NAND flash chip on Mikrotik Routerboard
+ RB4xx series.
+
endif # MTD_RAW_NAND
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -60,6 +60,7 @@ obj-$(CONFIG_MTD_NAND_ROCKCHIP) += rock
obj-$(CONFIG_MTD_NAND_PL35X) += pl35x-nand-controller.o
obj-$(CONFIG_MTD_NAND_RENESAS) += renesas-nand-controller.o
obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nand.o
+obj-$(CONFIG_MTD_NAND_RB4XX) += nand_rb4xx.o
nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
nand-objs += nand_onfi.o