mirror
/
openwrt
mirror of https://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Releases Activity
26,629 Commits 8 Branches 69 Tags 229 MiB
C 59.6%
Makefile 18.9%
Roff 9.1%
Shell 6.8%
Perl 2.6%
Other 2.9%
Go to file
Hauke Mehrtens f587bacc26 brcm47xx: b44: start the phy 
We did not start the PHY when an external phy was in use. Without this
patch the driver uses half duplex mode and the switch uses full duplex
mode, which causes problems.
Thank you fback for spotting this problem.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39719
 		2014-02-23 16:58:12 +00:00
config config: lxc: enable KERNEL_POSIX_MQUEUE 2014-01-24 13:49:39 +00:00
docs docs: update remaining references to functions.sh 2012-12-20 15:29:33 +00:00
include kernel: update 3.10 to 3.10.32 2014-02-23 10:59:40 +00:00
package netifd: update to latest version, fixes wireless device reload handling 2014-02-23 08:13:28 +00:00
scripts scripts/kconfig.pl: Indicate which file we couldn't open 2014-01-19 17:27:04 +00:00
target brcm47xx: b44: start the phy 2014-02-23 16:58:12 +00:00
toolchain gcc: prevent the use of LDRD/STRD on ARMv5TE 2014-02-19 19:20:10 +00:00
tools cmake: upgrade to 2.8.12.2 2014-02-16 21:51:10 +00:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore add git-src to .gitignore 2014-01-12 12:06:39 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in move menuconfig options into separate files 2013-11-22 14:30:40 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile build: it is no longer necessary to call make target/linux/clean as part of make clean 2012-12-02 15:26:28 +00:00
README build: BSD compile fixes 2013-03-07 17:32:29 +00:00
feeds.conf.default feeds: disable the x-wrt feed, it is unmaintained 2014-02-03 14:29:04 +00:00
rules.mk FPU type should not interfere with the ABI selection. Also make sure we either do real soft-float or hard-float on ARM, with the right options. 2013-11-29 10:59:51 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org