openwrt/target/linux/bcm27xx/patches-5.15/950-0006-drm-vc4-hdmi-Fix-H...

41 lines
1.5 KiB
Diff

From b460aee2dab3419842e24e7039a52d613b19a6e8 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime@cerno.tech>
Date: Mon, 25 Oct 2021 17:28:55 +0200
Subject: [PATCH] drm/vc4: hdmi: Fix HPD GPIO detection
Prior to commit 6800234ceee0 ("drm/vc4: hdmi: Convert to gpiod"), in the
detect hook, if we had an HPD GPIO we would only rely on it and return
whatever state it was in.
However, that commit changed that by mistake to only consider the case
where we have a GPIO and it returns a logical high, and would fall back
to the other methods otherwise.
Since we can read the EDIDs when the HPD signal is low on some displays,
we changed the detection status from disconnected to connected, and we
would ignore an HPD pulse.
Fixes: 6800234ceee0 ("drm/vc4: hdmi: Convert to gpiod")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20211025152903.1088803-3-maxime@cerno.tech
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -173,9 +173,9 @@ vc4_hdmi_connector_detect(struct drm_con
WARN_ON(pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev));
- if (vc4_hdmi->hpd_gpio &&
- gpiod_get_value_cansleep(vc4_hdmi->hpd_gpio)) {
- connected = true;
+ if (vc4_hdmi->hpd_gpio) {
+ if (gpiod_get_value_cansleep(vc4_hdmi->hpd_gpio))
+ connected = true;
} else if (HDMI_READ(HDMI_HOTPLUG) & VC4_HDMI_HOTPLUG_CONNECTED) {
connected = true;
}