openwrt/target/linux/ramips/image
Tobias Welz 816973f42a ramips: enable flashing WizFi630S via OEM firmware
WIZnet WizFi630s board name is written slightly different it its OEM
OpenWrt firmware. This causes an incompatibility warning during flashing
with sysupgrade. This patch is adding the vendor board name to the
supported devices list to avoid this warning. For initial flashing you
can use sysupgrade via command line or luci beside of TFTP.
Do not keep the OEM configuration during sysupgrade.

Signed-off-by: Tobias Welz <tw@wiznet.eu>
2020-08-05 23:08:03 +02:00
..
lzma-loader ramips: Add support for mt7621 to lzma-loader 2018-06-21 06:54:42 +02:00
Makefile ramips: consolidate Netgear devices for mt7628 2020-07-13 10:37:22 +02:00
common-tp-link.mk treewide: omit IMAGE_SIZE argument from check-size 2020-03-21 20:02:55 +01:00
mt76x8.mk ramips: enable flashing WizFi630S via OEM firmware 2020-08-05 23:08:03 +02:00
mt7620.mk ramips: consolidate recipes with uimage_padhdr 2020-07-11 18:38:42 +02:00
mt7621.mk ramips: add support for D-Link DIR-1960 A1 2020-07-27 12:37:07 +02:00
rt288x.mk ramips: tidy up image subtarget Makefiles 2020-05-08 18:58:39 +02:00
rt305x.mk ramips: add support for ZyXEL Keenetic Lite Rev.B 2020-07-08 22:52:40 +02:00
rt3883.mk ramips: tidy up image subtarget Makefiles 2020-05-08 18:58:39 +02:00