1
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-06-14 03:03:52 +02:00
openwrt/target/linux/ramips/image
Sungbo Eo a4e9c8f14b ramips: add support for netis WF2770
netis WF2770 is a 2.4/5GHz band AC750 router, based on MediaTek MT7620A.

Specifications:
- SoC: MT7620A
- RAM: DDR2 64MB
- Flash: SPI NOR 16MB
- WiFi:
  - 2.4GHz: SoC internal
  - 5GHz: MT7610EN
- Ethernet: 5x 10/100/1000Mbps
  - Switch: MT7530BU
- UART:
  - J2: 3.3V, RX, TX, GND (3.3V is the square pad) / 57600 8N1

MAC addresses in factory partition:
0x0004: LAN, WiFi 2.4GHz (label_mac-6)
0x0028: not used (label_mac-1)
0x002e: WAN (label_mac)
0x8004: WiFi 5GHz (label_mac+2)

Installation via web interface:
1.  Flash **initramfs** image through the stock web interface.
2.  Boot into OpenWrt and perform sysupgrade with sysupgrade image.

Revert to stock firmware:
1.  Perform sysupgrade with stock image.

Reviewed-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2020-05-17 18:41:48 +02:00
..
lzma-loader ramips: Add support for mt7621 to lzma-loader 2018-06-21 06:54:42 +02:00
common-tp-link.mk treewide: omit IMAGE_SIZE argument from check-size 2020-03-21 20:02:55 +01:00
Makefile ramips: add support for netis WF2770 2020-05-17 18:41:48 +02:00
mt76x8.mk ramips: tidy up image subtarget Makefiles 2020-05-08 18:58:39 +02:00
mt7620.mk ramips: add support for netis WF2770 2020-05-17 18:41:48 +02:00
mt7621.mk ramips: add support for netis WF2770 2020-05-17 18:41:48 +02:00
rt288x.mk ramips: tidy up image subtarget Makefiles 2020-05-08 18:58:39 +02:00
rt305x.mk ramips: tidy up image subtarget Makefiles 2020-05-08 18:58:39 +02:00
rt3883.mk ramips: tidy up image subtarget Makefiles 2020-05-08 18:58:39 +02:00