186 lines
5.2 KiB
Diff
186 lines
5.2 KiB
Diff
From 34e65b6f310234cf3e3629bd3d896a4f84df71f4 Mon Sep 17 00:00:00 2001
|
|
From: Jes Sorensen <Jes.Sorensen@redhat.com>
|
|
Date: Fri, 26 Aug 2016 16:09:00 -0400
|
|
Subject: [PATCH] rtl8xxxu: Implement rtl8188eu_power_off()
|
|
|
|
This makes the driver match the poweroff sequence of the vendor driver
|
|
and allows the firmware to reload correctly upon rmmod/insmod.
|
|
However the device still doesn't receive data upon reloading.
|
|
|
|
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
|
|
---
|
|
.../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 136 ++++++++++++++++++++-
|
|
.../net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h | 2 +
|
|
2 files changed, 137 insertions(+), 1 deletion(-)
|
|
|
|
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
|
|
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
|
|
@@ -1191,6 +1191,71 @@ exit:
|
|
return ret;
|
|
}
|
|
|
|
+static int rtl8188eu_emu_to_disabled(struct rtl8xxxu_priv *priv)
|
|
+{
|
|
+ u8 val8;
|
|
+
|
|
+ /* 0x04[12:11] = 01 enable WL suspend */
|
|
+ val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2);
|
|
+ val8 &= ~BIT(0);
|
|
+ rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8);
|
|
+
|
|
+ val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
|
|
+ val8 |= BIT(7);
|
|
+ rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int rtl8188eu_active_to_lps(struct rtl8xxxu_priv *priv)
|
|
+{
|
|
+ struct device *dev = &priv->udev->dev;
|
|
+ u8 val8;
|
|
+ u16 val16;
|
|
+ u32 val32;
|
|
+ int retry, retval;
|
|
+
|
|
+ rtl8xxxu_write8(priv, REG_TXPAUSE, 0x7f);
|
|
+
|
|
+ retry = 100;
|
|
+ retval = -EBUSY;
|
|
+ /*
|
|
+ * Poll 32 bit wide 0x05f8 for 0x00000000 to ensure no TX is pending.
|
|
+ */
|
|
+ do {
|
|
+ val32 = rtl8xxxu_read32(priv, 0x05f8);
|
|
+ if (!val32) {
|
|
+ retval = 0;
|
|
+ break;
|
|
+ }
|
|
+ } while (retry--);
|
|
+
|
|
+ if (!retry) {
|
|
+ dev_warn(dev, "Failed to flush TX queue\n");
|
|
+ retval = -EBUSY;
|
|
+ goto out;
|
|
+ }
|
|
+
|
|
+ /* Disable CCK and OFDM, clock gated */
|
|
+ val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC);
|
|
+ val8 &= ~SYS_FUNC_BBRSTB;
|
|
+ rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
|
|
+
|
|
+ udelay(2);
|
|
+
|
|
+ /* Reset MAC TRX */
|
|
+ val16 = rtl8xxxu_read16(priv, REG_CR);
|
|
+ val16 &= ~(CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE | CR_SECURITY_ENABLE);
|
|
+ rtl8xxxu_write16(priv, REG_CR, val16);
|
|
+
|
|
+ val8 = rtl8xxxu_read8(priv, REG_DUAL_TSF_RST);
|
|
+ val8 |= DUAL_TSF_TX_OK;
|
|
+ rtl8xxxu_write8(priv, REG_DUAL_TSF_RST, val8);
|
|
+
|
|
+out:
|
|
+ return retval;
|
|
+}
|
|
+
|
|
static int rtl8188eu_power_on(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u16 val16;
|
|
@@ -1221,6 +1286,75 @@ exit:
|
|
return ret;
|
|
}
|
|
|
|
+void rtl8188eu_power_off(struct rtl8xxxu_priv *priv)
|
|
+{
|
|
+ u8 val8;
|
|
+ u16 val16;
|
|
+
|
|
+ rtl8xxxu_flush_fifo(priv);
|
|
+
|
|
+ val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL);
|
|
+ val8 &= ~TX_REPORT_CTRL_TIMER_ENABLE;
|
|
+ rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8);
|
|
+
|
|
+ /* Turn off RF */
|
|
+ rtl8xxxu_write8(priv, REG_RF_CTRL, 0x00);
|
|
+
|
|
+ rtl8188eu_active_to_lps(priv);
|
|
+
|
|
+ /* Reset Firmware if running in RAM */
|
|
+ if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL)
|
|
+ rtl8xxxu_firmware_self_reset(priv);
|
|
+
|
|
+ /* Reset MCU */
|
|
+ val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
|
|
+ val16 &= ~SYS_FUNC_CPU_ENABLE;
|
|
+ rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
|
|
+
|
|
+ /* Reset MCU ready status */
|
|
+ rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00);
|
|
+
|
|
+ /* 32K_CTRL looks to be very 8188e specific */
|
|
+ val8 = rtl8xxxu_read8(priv, REG_32K_CTRL);
|
|
+ val8 &= ~BIT(0);
|
|
+ rtl8xxxu_write8(priv, REG_32K_CTRL, val8);
|
|
+
|
|
+ rtl8188eu_active_to_emu(priv);
|
|
+ rtl8188eu_emu_to_disabled(priv);
|
|
+
|
|
+ /* Reset MCU IO Wrapper */
|
|
+ val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
|
|
+ val8 &= ~BIT(3);
|
|
+ rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
|
|
+
|
|
+ val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
|
|
+ val8 |= BIT(3);
|
|
+ rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
|
|
+
|
|
+ /* Vendor driver refers to GPIO_IN */
|
|
+ val8 = rtl8xxxu_read8(priv, REG_GPIO_PIN_CTRL);
|
|
+ /* Vendor driver refers to GPIO_OUT */
|
|
+ rtl8xxxu_write8(priv, REG_GPIO_PIN_CTRL + 1, val8);
|
|
+ rtl8xxxu_write8(priv, REG_GPIO_PIN_CTRL + 2, 0xff);
|
|
+
|
|
+ val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL);
|
|
+ rtl8xxxu_write8(priv, REG_GPIO_IO_SEL + 1, val8 << 4);
|
|
+ val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL + 1);
|
|
+ rtl8xxxu_write8(priv, REG_GPIO_IO_SEL + 1, val8 | 0x0f);
|
|
+
|
|
+ /*
|
|
+ * Set LNA, TRSW, EX_PA Pin to output mode
|
|
+ * Referred to as REG_BB_PAD_CTRL in 8188eu vendor driver
|
|
+ */
|
|
+ rtl8xxxu_write32(priv, REG_PAD_CTRL1, 0x00080808);
|
|
+
|
|
+ rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x00);
|
|
+
|
|
+ val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO);
|
|
+ val16 |= APS_FSMCO_ENABLE_POWERDOWN | APS_FSMCO_HW_POWERDOWN;
|
|
+ rtl8xxxu_write16(priv, REG_APS_FSMCO, val16);
|
|
+}
|
|
+
|
|
static void rtl8188e_enable_rf(struct rtl8xxxu_priv *priv)
|
|
{
|
|
rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00);
|
|
@@ -1265,7 +1399,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
|
|
.parse_efuse = rtl8188eu_parse_efuse,
|
|
.load_firmware = rtl8188eu_load_firmware,
|
|
.power_on = rtl8188eu_power_on,
|
|
- .power_off = rtl8xxxu_power_off,
|
|
+ .power_off = rtl8188eu_power_off,
|
|
.reset_8051 = rtl8188eu_reset_8051,
|
|
.llt_init = rtl8xxxu_init_llt_table,
|
|
.init_phy_bb = rtl8188eu_init_phy_bb,
|
|
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
|
|
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
|
|
@@ -418,6 +418,8 @@
|
|
#define REG_MBIST_START 0x0174
|
|
#define REG_MBIST_DONE 0x0178
|
|
#define REG_MBIST_FAIL 0x017c
|
|
+/* 8188EU */
|
|
+#define REG_32K_CTRL 0x0194
|
|
#define REG_C2HEVT_MSG_NORMAL 0x01a0
|
|
/* 8192EU/8723BU/8812 */
|
|
#define REG_C2HEVT_CMD_ID_8723B 0x01ae
|