mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2024-06-13 10:49:13 +02:00
bbab33724d
Qxwlan E2600AC C1 based on IPQ4019 Specifications: SOC: Qualcomm IPQ4019 DRAM: 256 MiB FLASH: 32 MiB Winbond W25Q256 ETH: Qualcomm QCA8075 WLAN: 5G + 5G/2.4G * 2T2R 2.4/5 GHz - QCA4019 hw1.0 (SoC) * 2T2R 5 GHz - QCA4019 hw1.0 (SoC) INPUT: Reset buutton LED: 1x Power ,6 driven by gpio SERIAL: UART (J5) UUSB: USB3.0 POWER: 1x DC jack for main power input (9-24 V) SLOT: Pcie (J25), sim card (J11), SD card (J51) Flash instruction (using U-Boot CLI and tftp server): - Configure PC with static IP 192.168.1.10 and tftp server. - Rename "sysupgrade" filename to "firmware.bin" and place it in tftp server directory. - Connect PC with one of RJ45 ports, power up the board and press "enter" key to access U-Boot CLI. - Use the following command to update the device to OpenWrt: "run lfw". Flash instruction (using U-Boot web-based recovery): - Configure PC with static IP 192.168.1.xxx(2-254)/24. - Connect PC with one of RJ45 ports, press the reset button, power up the board and keep button pressed for around 6-7 seconds, until LEDs start flashing. - Open your browser and enter 192.168.1.1, select "sysupgrade" image and click the upgrade button. Qxwlan E2600AC C2 based on IPQ4019 Specifications: SOC: Qualcomm IPQ4019 DRAM: 256 MiB NOR: 16 MiB Winbond W25Q128 NAND: 128MiB Micron MT29F1G08ABAEAWP ETH: Qualcomm QCA8075 WLAN: 5G + 5G/2.4G * 2T2R 2.4/5 GHz - QCA4019 hw1.0 (SoC) * 2T2R 5 GHz - QCA4019 hw1.0 (SoC) INPUT: Reset buutton LED: 1x Power, 6 driven by gpio SERIAL: UART (J5) USB: USB3.0 POWER: 1x DC jack for main power input (9-24 V) SLOT: Pcie (J25), sim card (J11), SD card (J51) Flash instruction (using U-Boot CLI and tftp server): - Configure PC with static IP 192.168.1.10 and tftp server. - Rename "ubi" filename to "ubi-firmware.bin" and place it in tftp server directory. - Connect PC with one of RJ45 ports, power up the board and press "enter" key to access U-Boot CLI. - Use the following command to update the device to OpenWrt: "run lfw". Flash instruction (using U-Boot web-based recovery): - Configure PC with static IP 192.168.1.xxx(2-254)/24. - Connect PC with one of RJ45 ports, press the reset button, power up the board and keep button pressed for around 6-7 seconds, until LEDs start flashing. - Open your browser and enter 192.168.1.1, select "ubi" image and click the upgrade button. Signed-off-by: 张鹏 <sd20@qxwlan.com> [ added rng node. whitespace fixes, ported 02_network, ipq-wifi Makefile, misc dts fixes, trivial message changes ] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
116 lines
2.0 KiB
Plaintext
116 lines
2.0 KiB
Plaintext
/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
*
|
|
* Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
|
|
*
|
|
*/
|
|
|
|
#include "qcom-ipq4019-qxwlan-e2600ac.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
model = "Qxwlan E2600AC c2";
|
|
compatible = "qxwlan,e2600ac-c2";
|
|
};
|
|
|
|
&blsp1_spi1 {
|
|
pinctrl-0 = <&spi_0_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
|
|
|
|
flash@0 {
|
|
reg = <0>;
|
|
compatible = "jedec,spi-nor";
|
|
spi-max-frequency = <24000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "0:SBL1";
|
|
reg = <0x0 0x40000>;
|
|
read-only;
|
|
};
|
|
partition@40000 {
|
|
label = "0:MIBIB";
|
|
reg = <0x40000 0x20000>;
|
|
read-only;
|
|
};
|
|
partition@60000 {
|
|
label = "0:QSEE";
|
|
reg = <0x60000 0x60000>;
|
|
read-only;
|
|
};
|
|
partition@c0000 {
|
|
label = "0:CDT";
|
|
reg = <0xc0000 0x10000>;
|
|
read-only;
|
|
};
|
|
partition@d0000 {
|
|
label = "0:DDRPARAMS";
|
|
reg = <0xd0000 0x10000>;
|
|
read-only;
|
|
};
|
|
partition@e0000 {
|
|
label = "0:APPSBLENV";
|
|
reg = <0xe0000 0x10000>;
|
|
read-only;
|
|
};
|
|
partition@f0000 {
|
|
label = "0:APPSBL";
|
|
reg = <0xf0000 0x80000>;
|
|
read-only;
|
|
};
|
|
partition@170000 {
|
|
label = "0:ART";
|
|
reg = <0x170000 0x10000>;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&nand {
|
|
pinctrl-0 = <&nand_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
nand@0 {
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "ubi";
|
|
reg = <0x00000000 0x04000000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&tlmm {
|
|
nand_pins: nand-pins {
|
|
|
|
pullups {
|
|
pins = "gpio53", "gpio58", "gpio59";
|
|
function = "qpic";
|
|
bias-pull-up;
|
|
};
|
|
|
|
pulldowns {
|
|
pins = "gpio54", "gpio55", "gpio56",
|
|
"gpio57", "gpio60", "gpio61",
|
|
"gpio62", "gpio63", "gpio64",
|
|
"gpio65", "gpio66", "gpio67",
|
|
"gpio68", "gpio69";
|
|
function = "qpic";
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
};
|
|
|