openwrt/target/linux/ath79/dts/qca9556_mikrotik_routerboar...

127 lines
1.9 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca955x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "mikrotik,routerboard-wap-g-5hact2hnd", "qca,qca9556";
model = "MikroTik RouterBOARD wAP G-5HacT2HnD";
aliases {
mdio-gpio1 = &mdio2;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
mdio2: mdio {
compatible = "virtual,mdio-gpio";
gpios = <&gpio 12 GPIO_ACTIVE_HIGH>, /* MDC */
<&gpio 11 GPIO_ACTIVE_HIGH>; /* MDIO */
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@0 {
reg = <0>;
device_type = "ethernet-phy";
phy-mode = "sgmii";
at803x-override-sgmii-link-check;
};
};
};
&eth1 {
status = "okay";
pll-data = <0x03000101 0x80000101 0x80001313>;
phy-handle = <&phy0>;
qca955x-sgmii-fixup;
gmac-config {
device = <&gmac>;
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "RouterBoot";
reg = <0x0 0x20000>;
compatible = "mikrotik,routerboot-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "bootloader1";
reg = <0x0 0x0>;
read-only;
};
hard_config {
read-only;
};
bios {
size = <0x1000>;
read-only;
};
partition@10000 {
label = "bootloader2";
reg = <0x10000 0x0>;
read-only;
};
soft_config {
};
};
partition@20000 {
compatible = "mikrotik,minor";
label = "firmware";
reg = <0x020000 0xfe0000>;
};
};
};
};
&wmac {
status = "okay";
qca,no-eeprom;
};
&pcie0 {
status = "okay";
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0 0 0 0 0>;
};
};