openwrt/target/linux/mediatek/patches-5.4/0005-dts-mt7629-add-gsw.patch

91 lines
1.6 KiB
Diff

--- a/arch/arm/boot/dts/mt7629-rfb.dts
+++ b/arch/arm/boot/dts/mt7629-rfb.dts
@@ -18,6 +18,7 @@
chosen {
stdout-path = "serial0:115200n8";
+ bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8";
};
gpio-keys {
@@ -36,6 +37,13 @@
};
};
+ gsw: gsw@0 {
+ compatible = "mediatek,mt753x";
+ mediatek,ethsys = <&ethsys>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x10000000>;
@@ -70,6 +78,10 @@
compatible = "mediatek,eth-mac";
reg = <0>;
phy-mode = "2500base-x";
+
+ nvmem-cells = <&macaddr_factory_2a>;
+ nvmem-cell-names = "mac-address";
+
fixed-link {
speed = <2500>;
full-duplex;
@@ -82,6 +94,9 @@
reg = <1>;
phy-mode = "gmii";
phy-handle = <&phy0>;
+
+ nvmem-cells = <&macaddr_factory_24>;
+ nvmem-cell-names = "mac-address";
};
mdio: mdio-bus {
@@ -94,6 +109,26 @@
};
};
+&gsw {
+ mediatek,mdio = <&mdio>;
+ mediatek,portmap = "llllw";
+ mediatek,mdio_master_pinmux = <0>;
+ reset-gpios = <&pio 28 0>;
+ interrupt-parent = <&pio>;
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+
+ port6: port@6 {
+ compatible = "mediatek,mt753x-port";
+ reg = <6>;
+ phy-mode = "sgmii";
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ };
+ };
+};
+
&i2c {
pinctrl-names = "default";
pinctrl-0 = <&i2c_pins>;
@@ -272,3 +307,17 @@
pinctrl-0 = <&watchdog_pins>;
status = "okay";
};
+
+&factory {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_factory_24: macaddr@24 {
+ reg = <0x24 0x6>;
+ };
+
+ macaddr_factory_2a: macaddr@2a {
+ reg = <0x2a 0x6>;
+ };
+};