mirror
/
openwrt
mirror of https://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Releases Activity
openwrt/package/boot/arm-trusted-firmware-mvebu/patches/103-fix-plat-marvell-a3720-...

178 lines
5.6 KiB
Diff
Raw Blame History

From 5a91c439cbeb1f64b8b9830de91efad5113d3c89 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
Date: Fri, 14 May 2021 15:52:11 +0200
Subject: [PATCH] fix(plat/marvell/a3720/uart): fix UART parent clock rate
determination
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The UART code for the A3K platform assumes that UART parent clock rate
is always 25 MHz. This is incorrect, because the xtal clock can also run
at 40 MHz (this is board specific).
The frequency of the xtal clock is determined by a value on a strapping
pin during SOC reset. The code to determine this frequency is already in
A3K's comphy driver.
Move the get_ref_clk() function from the comphy driver to a separate
file and use it for UART parent clock rate determination.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I8bb18a2d020ef18fe65aa06ffa4ab205c71be92e
---
drivers/marvell/comphy/phy-comphy-3700.c | 24 +------------
.../marvell/armada/a3k/common/plat_marvell.h | 2 ++
.../marvell/armada/a3k/common/a3700_common.mk | 1 +
.../armada/a3k/common/aarch64/a3700_clock.S | 35 +++++++++++++++++++
.../armada/a3k/common/include/platform_def.h | 1 -
.../armada/common/aarch64/marvell_helpers.S | 10 +++++-
plat/marvell/armada/common/marvell_console.c | 1 +
7 files changed, 49 insertions(+), 25 deletions(-)
create mode 100644 plat/marvell/armada/a3k/common/aarch64/a3700_clock.S
--- a/drivers/marvell/comphy/phy-comphy-3700.c
+++ b/drivers/marvell/comphy/phy-comphy-3700.c
@@ -14,6 +14,7 @@
#include <mvebu.h>
#include <mvebu_def.h>
+#include <plat_marvell.h>
#include "phy-comphy-3700.h"
#include "phy-comphy-common.h"
@@ -29,15 +30,6 @@
#define USB3_GBE1_PHY (MVEBU_REGS_BASE + 0x5C000)
#define COMPHY_SD_ADDR (MVEBU_REGS_BASE + 0x1F000)
-/*
- * Below address in used only for reading, therefore no problem with concurrent
- * Linux access.
- */
-#define MVEBU_TEST_PIN_LATCH_N (MVEBU_NB_GPIO_REG_BASE + 0x8)
- #define MVEBU_XTAL_MODE_MASK BIT(9)
- #define MVEBU_XTAL_MODE_OFFS 9
- #define MVEBU_XTAL_CLOCK_25MHZ 0x0
-
struct sgmii_phy_init_data_fix {
uint16_t addr;
uint16_t value;
@@ -125,20 +117,6 @@ static uint16_t sgmii_phy_init[512] = {
0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000 /*1F8 */
};
-/* returns reference clock in MHz (25 or 40) */
-static uint32_t get_ref_clk(void)
-{
- uint32_t val;
-
- val = (mmio_read_32(MVEBU_TEST_PIN_LATCH_N) & MVEBU_XTAL_MODE_MASK) >>
- MVEBU_XTAL_MODE_OFFS;
-
- if (val == MVEBU_XTAL_CLOCK_25MHZ)
- return 25;
- else
- return 40;
-}
-
/* PHY selector configures with corresponding modes */
static void mvebu_a3700_comphy_set_phy_selector(uint8_t comphy_index,
uint32_t comphy_mode)
--- a/include/plat/marvell/armada/a3k/common/plat_marvell.h
+++ b/include/plat/marvell/armada/a3k/common/plat_marvell.h
@@ -100,4 +100,6 @@ void plat_marvell_interconnect_enter_coh
const mmap_region_t *plat_marvell_get_mmap(void);
+uint32_t get_ref_clk(void);
+
#endif /* PLAT_MARVELL_H */
--- a/plat/marvell/armada/a3k/common/a3700_common.mk
+++ b/plat/marvell/armada/a3k/common/a3700_common.mk
@@ -38,6 +38,7 @@ PLAT_INCLUDES := -I$(PLAT_FAMILY_BASE)/
-I$/drivers/arm/gic/common/
PLAT_BL_COMMON_SOURCES := $(PLAT_COMMON_BASE)/aarch64/a3700_common.c \
+ $(PLAT_COMMON_BASE)/aarch64/a3700_clock.S \
$(MARVELL_DRV_BASE)/uart/a3700_console.S
BL1_SOURCES += $(PLAT_COMMON_BASE)/aarch64/plat_helpers.S \
--- /dev/null
+++ b/plat/marvell/armada/a3k/common/aarch64/a3700_clock.S
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <asm_macros.S>
+#include <platform_def.h>
+
+/*
+ * Below address in used only for reading, therefore no problem with concurrent
+ * Linux access.
+ */
+#define MVEBU_TEST_PIN_LATCH_N (MVEBU_NB_GPIO_REG_BASE + 0x8)
+ #define MVEBU_XTAL_MODE_MASK BIT(9)
+
+ /* -----------------------------------------------------
+ * uint32_t get_ref_clk (void);
+ *
+ * returns reference clock in MHz (25 or 40)
+ * -----------------------------------------------------
+ */
+.globl get_ref_clk
+func get_ref_clk
+ mov_imm x0, MVEBU_TEST_PIN_LATCH_N
+ ldr w0, [x0]
+ tst w0, #MVEBU_XTAL_MODE_MASK
+ bne 40
+ mov w0, #25
+ ret
+40:
+ mov w0, #40
+ ret
+endfunc get_ref_clk
--- a/plat/marvell/armada/a3k/common/include/platform_def.h
+++ b/plat/marvell/armada/a3k/common/include/platform_def.h
@@ -164,7 +164,6 @@
* PL011 related constants
*/
#define PLAT_MARVELL_UART_BASE (MVEBU_REGS_BASE + 0x12000)
-#define PLAT_MARVELL_UART_CLK_IN_HZ 25000000
#define PLAT_MARVELL_BL31_RUN_UART_BASE PLAT_MARVELL_BOOT_UART_BASE
#define PLAT_MARVELL_BL31_RUN_UART_CLK_IN_HZ PLAT_MARVELL_BOOT_UART_CLK_IN_HZ
--- a/plat/marvell/armada/common/aarch64/marvell_helpers.S
+++ b/plat/marvell/armada/common/aarch64/marvell_helpers.S
@@ -63,8 +63,16 @@ endfunc plat_marvell_calc_core_pos
* ---------------------------------------------
*/
func plat_crash_console_init
- mov_imm x0, PLAT_MARVELL_UART_BASE
+#ifdef PLAT_a3700
+ mov x1, x30
+ bl get_ref_clk
+ mov x30, x1
+ mov_imm x1, 1000000
+ mul x1, x0, x1
+#else
mov_imm x1, PLAT_MARVELL_UART_CLK_IN_HZ
+#endif
+ mov_imm x0, PLAT_MARVELL_UART_BASE
mov_imm x2, MARVELL_CONSOLE_BAUDRATE
#ifdef PLAT_a3700
b console_a3700_core_init
--- a/plat/marvell/armada/common/marvell_console.c
+++ b/plat/marvell/armada/common/marvell_console.c
@@ -14,6 +14,7 @@
#ifdef PLAT_a3700
#include <drivers/marvell/uart/a3700_console.h>
+#define PLAT_MARVELL_UART_CLK_IN_HZ (get_ref_clk() * 1000000)
#define console_marvell_register console_a3700_register
#else
#include <drivers/ti/uart/uart_16550.h>
View Git Blame Copy Permalink