1
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-06-16 04:03:56 +02:00
openwrt/target/linux/ramips
INAGAKI Hiroshi 7ff0efa0b0 ramips: add support for I-O DATA WN-DX2033GR
I-O DATA WN-DX2033GR is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on
MT7621A.

Specification:

- SoC		: MediaTek MT7621A
- RAM		: DDR3 128 MiB
- Flash		: Raw NAND 128 MiB (Macronix MX30LF1G18AC-TI)
- WLAN		: 2.4/5 GHz
  - 2.4 GHz	: 2T2R, MediaTek MT7603E
  - 5 GHz	: 4T4R, MediaTek MT7615
- Ethernet	: 5x 10/100/1000 Mbps
  - Switch	: MediaTek MT7530 (SoC)
- LEDs/Keys	: 2x/3x (2x buttons, 1x slide-switch)
- UART		: through-hole on PCB
  - J5: 3.3V, TX, RX, NC, GND from triangle mark
  - 57600n8
- Power		: 12 VDC, 1 A

Flash instruction using initramfs image:

1. Boot WN-DX2033GR normally
2. Access to "http://192.168.0.1/" and open firmware update page
   ("ファームウェア")
3. Select the OpenWrt initramfs image and click update ("更新") button
   to perform firmware update
4. On the initramfs image, download the sysupgrade.bin image to the
   device and perform sysupgrade with it
5. Wait ~120 seconds to complete flashing

Notes:

- The hardware of WN-DX2033GR and WN-AX2033GR are almost the same, and
  it is certified under the same radio-wave related regulations in Japan

- The last 0x80000 (512 KiB) in NAND flash is not used on stock firmware

- stock firmware requires "customized uImage header" (called as "combo
  image") by MSTC (MitraStar Technology Corp.), but U-Boot doesn't

  - uImage magic ( 0x0 - 0x3 ) : 0x434F4D42 ("COMB")
  - header crc32 ( 0x4 - 0x7 ) : with "data length" and "data crc32"
  - image name   (0x20 - 0x37) : model ID and firmware versions
  - data length  (0x38 - 0x3b) : kernel + rootfs
  - data crc32   (0x3c - 0x3f) : kernel + rootfs

- There are 2x important flags in the flash:

  - bootnum   : select os partition for booting (persist, 0x4)

    - 0x01: firmware
    - 0x02: firmware_2

  - debugflag : allow interrupt kernel loader, it's named as "Z-LOADER"
    (Factory, 0xFE75)

    - 0x00: disable debug
    - 0x01: enable debug

MAC addresses:

LAN     : 50:41:B9:xx:xx:90 (Factory, 0xE000 (hex) / Ubootenv, ethaddr (text))
WAN     : 50:41:B9:xx:xx:92 (Factory, 0xE006 (hex))
2.4 GHz : 50:41:B9:xx:xx:90 (Factory, 0x4    (hex))
5 GHz   : 50:41:B9:xx:xx:91 (Factory, 0x8004 (hex))

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2021-09-25 19:28:54 +02:00
..
base-files/etc ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
dts ramips: add support for I-O DATA WN-DX2033GR 2021-09-25 19:28:54 +02:00
files/drivers treewide: backport support for nvmem on non platform devices 2021-08-05 01:46:26 +02:00
image ramips: add support for I-O DATA WN-DX2033GR 2021-09-25 19:28:54 +02:00
mt76x8 ramips: minew g1-c: use default static address for lan instead of dhcp 2021-08-31 02:42:32 +02:00
mt7620 ramips: add support for Sitecom WLR-4100 v1 002 2021-09-05 23:52:35 +02:00
mt7621 ramips: add support for I-O DATA WN-DX2033GR 2021-09-25 19:28:54 +02:00
patches-5.4 kernel: bump 5.4 to 5.4.139 2021-08-14 20:25:19 +02:00
patches-5.10 kernel: bump 5.10 to 5.10.57 2021-08-14 16:32:34 +01:00
rt288x ramips: fix missing NVMEM subsystem 2021-07-21 11:39:39 +02:00
rt305x ramips: fix missing NVMEM subsystem 2021-07-21 11:39:39 +02:00
rt3883 ramips: fix missing NVMEM subsystem 2021-07-21 11:39:39 +02:00
Makefile ramips: 5.10: port and refresh patches, ralink drv 2021-03-06 11:24:12 +01:00
modules.mk ramips: rename mtk-hsdma to hsdma-mt7621 2021-03-04 23:43:02 -10:00