Pawel Dembicki a82fa5bcd4 ramips: mt7620: Enable PHY aneg of Lava LR-25G001 ... In 20b09a2125 Lava LR-25G001 router have problem with two inactive ethernet ports. JBOOT bootloader didn't configure ethernet devices by default. The same situation was there. It is required to enable all phy ports. This is fragment of stock bootlog: switch reg write_athr offset=90, value=2b0 switch reg write_athr offset=8c, value=2b0 switch reg write_athr offset=88, value=2b0 switch reg write_athr offset=84, value=2b0 switch reg write_athr offset=80, value=2b0 This patch adds proper registers configuration ar8337 initvals. 0x2b0 value causes force flow control configuration, 0x1200 was used instead (flow control config auto-neg with phy). [1] When switch is now ok, let's fix port numeration too. Fixes: 20b09a2125 ("ramips: add support for Lava LR-25G001") [1] https://github.com/openwrt/openwrt/pull/4806#issuecomment-982019858 Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>		2021-12-04 00:36:47 +01:00
..
board.d	ramips: mt7620: Enable PHY aneg of Lava LR-25G001	2021-12-04 00:36:47 +01:00
hotplug.d/firmware	ramips: add support for D-Link DWR-960	2020-04-08 14:05:51 +01:00
init.d	ramips: add support for ALFA Network R36M-E4G	2019-11-13 21:45:31 +01:00
uci-defaults	ramips: remove model name from LED labels	2020-10-02 14:51:57 +02:00