1
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-06-26 09:37:29 +02:00
openwrt/package/boot
Michal Cieslakiewicz 9b6f89c37f ath79: add support for Netgear WNDR4300
This patch adds ath79 support for Netgear WNDR4300.
Router was previously supported by ar71xx target only.
Note: device requires 'ar934x-nand' driver in kernel.

Specification
=============
  * Description: Netgear WNDR4300
  * Loader: U-boot
  * SOC: Atheros AR9344 (560 MHz)
  * RAM: 128 MiB
  * Flash: 128 MiB (NAND)
	- U-boot binary: 256 KiB
	- U-boot environment: 256 KiB
	- ART: 256 KiB
	- POT: 512 KiB
	- Language: 2 MiB
	- Config: 512 KiB
	- Traffic Meter: 3 MiB
	- Firmware: 25 MiB
	- ART Backup: 256 KiB
	- Reserved: 96 MiB
  * Ethernet: 5 x 10/100/1000 (4 x LAN, 1 x WAN) (AR8327)
  * Wireless:
	- 2.4 GHz b/g/n (internal)
	- 5 GHz a/n (AR9580)
  * USB: yes, 1 x USB 2.0
  * Buttons:
	- Reset
	- WiFi (rfkill)
	- WPS
  * LEDs:
	- Power (amber/green)
	- WAN (amber/green)
	- WLAN 2G (green)
	- WLAN 5G (blue)
	- 4 x LAN (amber/green)
	- USB (green)
	- WPS (amber/green)
  * UART: 4-pin connector JP1, 3.3V (Vcc, TX, RX, GND), 115200 8N1
  * Power supply: DC 12V 2.5A
  * MAC addresses: LAN=WLAN2G on case label, WAN +1, WLAN5G +2

Installation
============
  * TFTP recovery
  * TFTP via U-boot prompt
  * sysupgrade
  * Web interface

Note about partitioning: firmware partition offset (0x6c0000) is
hardcoded into vendor's u-boot, so this partition cannot be moved
and resized to include Netgear-specific flash areas (pot, language,
config, traffic_meter) not used by OpenWrt.

Test build configuration
========================
CONFIG_TARGET_ath79=y
CONFIG_TARGET_ath79_nand=y
CONFIG_TARGET_ath79_nand_DEVICE_netgear_wndr4300=y
CONFIG_ALL_KMODS=y
CONFIG_DEVEL=y
CONFIG_CCACHE=y
CONFIG_COLLECT_KERNEL_DEBUG=y
CONFIG_IMAGEOPT=y

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
2019-11-02 19:29:30 +01:00
..
apex apex: Remove dead URL. 2018-08-22 11:21:53 +02:00
arm-trusted-firmware-sunxi arm-trusted-firmware-sunxi: Replace with official ARM version 2019-01-13 17:35:14 +01:00
at91bootstrap at91bootstrap: add sama5d27_som1_eksd1_uboot as default defconfig 2019-08-17 23:08:44 +02:00
fconfig fconfig: cleanup Makefile 2019-04-06 19:14:06 +02:00
grub2 grub2: fix a build regression on non-linux systems 2019-10-02 13:16:21 +02:00
imx-bootlets treewide: clean up download hashes 2016-12-16 22:39:22 +01:00
kexec-tools kexec-tools: change kdump.init STOP index 2019-06-24 20:22:24 +02:00
kobs-ng kobs-ng: add header for integer definitions 2017-11-16 22:56:54 +01:00
rbcfg rbcfg: Implement CPU frequency control 2017-10-07 15:00:26 +02:00
tfa-layerscape build: include BUILD_VARIANT in PKG_BUILD_DIR 2019-08-05 23:22:26 +02:00
uboot-ar71xx uboot-ar71xx: fix musl host build 2019-01-22 13:29:46 +01:00
uboot-at91 uboot-at91: fix -Wformat-security 2019-08-17 23:08:10 +02:00
uboot-envtools ath79: add support for Netgear WNDR4300 2019-11-02 19:29:30 +01:00
uboot-fritz4040 ipq40xx: add support for AVM FRITZ!Repeater 1200 2019-10-23 01:17:28 +02:00
uboot-imx6 uboot-imx6: bump to 2019.04 and refresh patches 2019-05-20 21:19:48 +02:00
uboot-kirkwood uboot-kirkwood: update to 2019.01 2019-02-17 19:22:39 +01:00
uboot-lantiq uboot-lantiq: fix compile with modern host dtc 2018-10-07 02:12:06 +02:00
uboot-layerscape layerscape: fix u-boot bootcmd 2019-06-06 15:40:09 +02:00
uboot-mvebu uboot-mvebu: add support for Macronix mx25u12835f flash 2019-11-01 21:19:40 +01:00
uboot-mxs uboot-mxs: bump to v2019.01 2019-01-26 21:46:32 +01:00
uboot-omap package/uboot-omap: backport patches to fix build 2019-03-28 02:10:12 +01:00
uboot-oxnas uboot-oxnas: remove unnecessary execute permission bit 2019-10-12 23:37:00 +02:00
uboot-sunxi sunxi: Add support for Banana Pi M2 Ultra 2019-09-21 01:12:35 +02:00
uboot-tegra tegra: add vendor string to device name 2019-05-15 13:34:23 +02:00
uboot-zynq uboot-zynq: update to 2019.07 2019-09-01 18:38:05 +02:00