mirror/openwrt
1
0
Fork 0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-06-13 10:49:13 +02:00
Code Releases Activity
9149ed4f05
openwrt/target/linux/mvebu/image/cortexa9.mk
Pawel Dembicki 9149ed4f05 mvebu: cortexa9: Add support for Ctera C200-V2 
2-Bay NAS - maximum two 3.5" Harddisks

Hardware:
  - SoC: Marvell 88F6707-A1 ARMv7 Processor 1,2GHz (ARMADA 370 SoC)
  - Ram: 1GB (2x Nanya NT5CC512M8DN-D1)
  - NAND Flash: 256MB (ESMT F59L2G81A-25T)
  - Lan: 1x GBE (Marvell 88E1318-NNB2)
  - Storage: 2x SATA HDD 3.5" Slot
  - USB: 2x USB 3.0 port (Renesas uPD720202)
  - Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND)
  - LEDs: 13x GPIO controlled
  - Buttons: 2x GPIO controlled

Known issues:
  - Buzzer is unused due lack of proper driver
  - USB1/2 usbport ledtrigger won't work (through DT)
  - Renesas uPD720202 requires firmware file. It's possible to find
    non-free binary. Please look for 'UPDATE.mem' file and put in into
    '/lib/firmware/renesas_usb_fw.mem' file.

Installation:
  - Apply factory initramfs image via stock web-gui.
  - Do sysupgrade to make installation complete.

Back to stock:
  - OpenWrt rootfs partition use unused space after stock firmware.
  - Full revert is possible.
  - Login via ssh and run:

 ## ctera_c200-v2_back_to_factory start ##
 . /lib/functions.sh
 part=$(find_mtd_part "active_bank")
 active_bank=$(strings "$part" | grep bank)
 if [ "$active_bank" = "bank1" ]; then
 	echo "bank2" > /tmp/change_bank
 else
 	echo "bank1" > /tmp/change_bank
 fi
 mtd write /tmp/change_bank active_bank
 reboot
 ## ctera_c200-v2_back_to_factory end ##

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
(put back-to-stock script into commit message, removed dup. SUBPAGESIZE var,
added 01_leds for non-working dt-usb-port trigger)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-01-15 17:41:19 +01:00

290 lines
9.1 KiB
Makefile
Raw Blame History

# SPDX-License-Identifier: GPL-2.0-only
#
# Copyright (C) 2012-2016 OpenWrt.org
# Copyright (C) 2016 LEDE-project.org
define Device/dsa-migration
DEVICE_COMPAT_VERSION := 1.1
DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
endef
define Device/kernel-size-migration
DEVICE_COMPAT_VERSION := 2.0
DEVICE_COMPAT_MESSAGE := Partition design has changed compared to older versions (up to 19.07) due to kernel size restrictions. \
Upgrade via sysupgrade mechanism is not possible, so new installation via factory style image is required.
endef
define Device/buffalo_ls421de
$(Device/NAND-128K)
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := LinkStation LS421DE
SUBPAGESIZE :=
KERNEL_SIZE := 33554432
FILESYSTEMS := squashfs ubifs
KERNEL := kernel-bin | append-dtb | uImage none | buffalo-kernel-jffs2
KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none
DEVICE_DTS := armada-370-buffalo-ls421de
DEVICE_PACKAGES := \
kmod-rtc-rs5c372a kmod-hwmon-gpiofan kmod-hwmon-drivetemp kmod-usb3 \
kmod-linkstation-poweroff kmod-md-raid0 kmod-md-raid1 kmod-md-mod \
kmod-fs-xfs mkf2fs e2fsprogs partx-utils
endef
TARGET_DEVICES += buffalo_ls421de
define Device/ctera_c200-v2
PAGESIZE := 2048
SUBPAGESIZE := 512
BLOCKSIZE := 128k
DEVICE_VENDOR := Ctera
DEVICE_MODEL := C200
DEVICE_VARIANT := V2
SOC := armada-370
KERNEL := kernel-bin | append-dtb | uImage none | ctera-firmware
KERNEL_IN_UBI :=
KERNEL_SUFFIX := -factory.firm
DEVICE_PACKAGES := \
kmod-gpio-button-hotplug kmod-hwmon-drivetemp kmod-hwmon-nct7802 \
kmod-rtc-s35390a kmod-usb3 kmod-usb-ledtrig-usbport
IMAGES := sysupgrade.bin
endef
TARGET_DEVICES += ctera_c200-v2
define Device/cznic_turris-omnia
DEVICE_VENDOR := CZ.NIC
DEVICE_MODEL := Turris Omnia
KERNEL_INSTALL := 1
SOC := armada-385
KERNEL := kernel-bin
KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
DEVICE_PACKAGES := \
mkf2fs e2fsprogs kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1 \
wpad-basic-wolfssl kmod-ath9k kmod-ath10k-ct ath10k-firmware-qca988x-ct \
partx-utils kmod-i2c-mux-pca954x
IMAGES := $$(DEVICE_IMG_PREFIX)-sysupgrade.img.gz omnia-medkit-$$(DEVICE_IMG_PREFIX)-initramfs.tar.gz
IMAGE/$$(DEVICE_IMG_PREFIX)-sysupgrade.img.gz := boot-scr | boot-img | sdcard-img | gzip | append-metadata
IMAGE/omnia-medkit-$$(DEVICE_IMG_PREFIX)-initramfs.tar.gz := omnia-medkit-initramfs | gzip
DEVICE_IMG_NAME = $$(2)
SUPPORTED_DEVICES += armada-385-turris-omnia
BOOT_SCRIPT := turris-omnia
endef
TARGET_DEVICES += cznic_turris-omnia
define Device/globalscale_mirabox
$(Device/NAND-512K)
DEVICE_VENDOR := Globalscale
DEVICE_MODEL := Mirabox
SOC := armada-370
SUPPORTED_DEVICES += mirabox
endef
TARGET_DEVICES += globalscale_mirabox
define Device/kobol_helios4
DEVICE_VENDOR := Kobol
DEVICE_MODEL := Helios4
KERNEL_INSTALL := 1
KERNEL := kernel-bin
DEVICE_PACKAGES := mkf2fs e2fsprogs partx-utils
IMAGES := sdcard.img.gz
IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
SOC := armada-388
UBOOT := helios4-u-boot-spl.kwb
BOOT_SCRIPT := clearfog
endef
TARGET_DEVICES += kobol_helios4
define Device/linksys
$(Device/NAND-128K)
DEVICE_VENDOR := Linksys
DEVICE_PACKAGES := kmod-mwlwifi wpad-basic-wolfssl
IMAGES += factory.img
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
append-ubi | pad-to $$$$(PAGESIZE)
KERNEL_SIZE := 6144k
endef
define Device/linksys_wrt1200ac
$(call Device/linksys)
$(Device/dsa-migration)
DEVICE_MODEL := WRT1200AC
DEVICE_ALT0_VENDOR := Linksys
DEVICE_ALT0_MODEL := Caiman
DEVICE_DTS := armada-385-linksys-caiman
DEVICE_PACKAGES += mwlwifi-firmware-88w8864
SUPPORTED_DEVICES += armada-385-linksys-caiman linksys,caiman
endef
TARGET_DEVICES += linksys_wrt1200ac
define Device/linksys_wrt1900acs
$(call Device/linksys)
$(Device/dsa-migration)
DEVICE_MODEL := WRT1900ACS
DEVICE_VARIANT := v1
DEVICE_ALT0_VENDOR := Linksys
DEVICE_ALT0_MODEL := WRT1900ACS
DEVICE_ALT0_VARIANT := v2
DEVICE_ALT1_VENDOR := Linksys
DEVICE_ALT1_MODEL := Shelby
DEVICE_DTS := armada-385-linksys-shelby
DEVICE_PACKAGES += mwlwifi-firmware-88w8864
SUPPORTED_DEVICES += armada-385-linksys-shelby linksys,shelby
endef
TARGET_DEVICES += linksys_wrt1900acs
define Device/linksys_wrt1900ac-v1
$(call Device/linksys)
$(Device/kernel-size-migration)
DEVICE_MODEL := WRT1900AC
DEVICE_VARIANT := v1
DEVICE_ALT0_VENDOR := Linksys
DEVICE_ALT0_MODEL := Mamba
DEVICE_DTS := armada-xp-linksys-mamba
DEVICE_PACKAGES += mwlwifi-firmware-88w8864
KERNEL_SIZE := 4096k
SUPPORTED_DEVICES += armada-xp-linksys-mamba linksys,mamba
endef
TARGET_DEVICES += linksys_wrt1900ac-v1
define Device/linksys_wrt1900ac-v2
$(call Device/linksys)
$(Device/dsa-migration)
DEVICE_MODEL := WRT1900AC
DEVICE_VARIANT := v2
DEVICE_ALT0_VENDOR := Linksys
DEVICE_ALT0_MODEL := Cobra
DEVICE_DTS := armada-385-linksys-cobra
DEVICE_PACKAGES += mwlwifi-firmware-88w8864
SUPPORTED_DEVICES += armada-385-linksys-cobra linksys,cobra
endef
TARGET_DEVICES += linksys_wrt1900ac-v2
define Device/linksys_wrt3200acm
$(call Device/linksys)
$(Device/dsa-migration)
DEVICE_MODEL := WRT3200ACM
DEVICE_ALT0_VENDOR := Linksys
DEVICE_ALT0_MODEL := Rango
DEVICE_DTS := armada-385-linksys-rango
DEVICE_PACKAGES += kmod-btmrvl kmod-mwifiex-sdio mwlwifi-firmware-88w8964
SUPPORTED_DEVICES += armada-385-linksys-rango linksys,rango
endef
TARGET_DEVICES += linksys_wrt3200acm
define Device/linksys_wrt32x
$(call Device/linksys)
$(Device/kernel-size-migration)
DEVICE_MODEL := WRT32X
DEVICE_ALT0_VENDOR := Linksys
DEVICE_ALT0_MODEL := Venom
DEVICE_DTS := armada-385-linksys-venom
DEVICE_PACKAGES += kmod-btmrvl kmod-mwifiex-sdio mwlwifi-firmware-88w8964
KERNEL_SIZE := 6144k
KERNEL := kernel-bin | append-dtb
SUPPORTED_DEVICES += armada-385-linksys-venom linksys,venom
endef
TARGET_DEVICES += linksys_wrt32x
define Device/marvell_a370-db
$(Device/NAND-512K)
DEVICE_VENDOR := Marvell
DEVICE_MODEL := Armada 370 Development Board (DB-88F6710-BP-DDR3)
DEVICE_DTS := armada-370-db
SUPPORTED_DEVICES += armada-370-db
endef
TARGET_DEVICES += marvell_a370-db
define Device/marvell_a370-rd
$(Device/NAND-512K)
DEVICE_VENDOR := Marvell
DEVICE_MODEL := Armada 370 RD (RD-88F6710-A1)
DEVICE_DTS := armada-370-rd
SUPPORTED_DEVICES += armada-370-rd
endef
TARGET_DEVICES += marvell_a370-rd
define Device/marvell_a385-db-ap
$(Device/NAND-256K)
DEVICE_VENDOR := Marvell
DEVICE_MODEL := Armada 385 Development Board AP (DB-88F6820-AP)
DEVICE_DTS := armada-385-db-ap
IMAGES += factory.img
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
append-ubi | pad-to $$$$(PAGESIZE)
KERNEL_SIZE := 8192k
SUPPORTED_DEVICES += armada-385-db-ap
endef
TARGET_DEVICES += marvell_a385-db-ap
define Device/marvell_a388-rd
DEVICE_VENDOR := Marvell
DEVICE_MODEL := Armada 388 RD (RD-88F6820-AP)
DEVICE_DTS := armada-388-rd
IMAGES := firmware.bin
IMAGE/firmware.bin := append-kernel | pad-to 256k | append-rootfs | pad-rootfs
SUPPORTED_DEVICES := armada-388-rd marvell,a385-rd
endef
TARGET_DEVICES += marvell_a388-rd
define Device/marvell_axp-db
$(Device/NAND-512K)
DEVICE_VENDOR := Marvell
DEVICE_MODEL := Armada XP Development Board (DB-78460-BP)
DEVICE_DTS := armada-xp-db
SUPPORTED_DEVICES += armada-xp-db
endef
TARGET_DEVICES += marvell_axp-db
define Device/marvell_axp-gp
$(Device/NAND-512K)
DEVICE_VENDOR := Marvell
DEVICE_MODEL := Armada Armada XP GP (DB-MV784MP-GP)
DEVICE_DTS := armada-xp-gp
SUPPORTED_DEVICES += armada-xp-gp
endef
TARGET_DEVICES += marvell_axp-gp
define Device/plathome_openblocks-ax3-4
DEVICE_VENDOR := Plat'Home
DEVICE_MODEL := OpenBlocks AX3
DEVICE_VARIANT := 4 ports
SOC := armada-xp
SUPPORTED_DEVICES += openblocks-ax3-4
BLOCKSIZE := 128k
PAGESIZE := 1
IMAGES += factory.img
IMAGE/factory.img := append-kernel | pad-to $$(BLOCKSIZE) | append-ubi
endef
TARGET_DEVICES += plathome_openblocks-ax3-4
define Device/solidrun_clearfog-base-a1
DEVICE_VENDOR := SolidRun
DEVICE_MODEL := ClearFog Base
KERNEL_INSTALL := 1
KERNEL := kernel-bin
DEVICE_PACKAGES := mkf2fs e2fsprogs partx-utils
IMAGES := sdcard.img.gz
IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
DEVICE_DTS := armada-388-clearfog-base armada-388-clearfog-pro
UBOOT := clearfog-u-boot-spl.kwb
BOOT_SCRIPT := clearfog
SUPPORTED_DEVICES += armada-388-clearfog-base
DEVICE_COMPAT_VERSION := 1.1
DEVICE_COMPAT_MESSAGE := Ethernet interface rename has been dropped
endef
TARGET_DEVICES += solidrun_clearfog-base-a1
define Device/solidrun_clearfog-pro-a1
$(Device/dsa-migration)
DEVICE_VENDOR := SolidRun
DEVICE_MODEL := ClearFog Pro
KERNEL_INSTALL := 1
KERNEL := kernel-bin
DEVICE_PACKAGES := mkf2fs e2fsprogs partx-utils
IMAGES := sdcard.img.gz
IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
DEVICE_DTS := armada-388-clearfog-pro armada-388-clearfog-base
UBOOT := clearfog-u-boot-spl.kwb
BOOT_SCRIPT := clearfog
SUPPORTED_DEVICES += armada-388-clearfog armada-388-clearfog-pro
endef
TARGET_DEVICES += solidrun_clearfog-pro-a1
View Git Blame Copy Permalink