openwrt/target/linux/generic/backport-6.6/706-v6.6-05-net-phy-at803x-...

99 lines
3.0 KiB
Diff

From df9401ff3e6eeaa42bfb06761967f1b71f5afce7 Mon Sep 17 00:00:00 2001
From: Luo Jie <quic_luoj@quicinc.com>
Date: Sun, 16 Jul 2023 16:49:23 +0800
Subject: [PATCH 5/6] net: phy: at803x: remove qca8081 1G fast retrain and
slave seed config
The fast retrain and slave seed configs are only applicable when the 2.5G
ability is supported.
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/phy/at803x.c | 50 +++++++++++++++++++++++++---------------
1 file changed, 32 insertions(+), 18 deletions(-)
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1755,6 +1755,11 @@ static bool qca808x_is_prefer_master(str
(phydev->master_slave_get == MASTER_SLAVE_CFG_MASTER_PREFERRED);
}
+static bool qca808x_has_fast_retrain_or_slave_seed(struct phy_device *phydev)
+{
+ return linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported);
+}
+
static int qca808x_config_init(struct phy_device *phydev)
{
int ret;
@@ -1771,20 +1776,24 @@ static int qca808x_config_init(struct ph
if (ret)
return ret;
- /* Config the fast retrain for the link 2500M */
- ret = qca808x_phy_fast_retrain_config(phydev);
- if (ret)
- return ret;
-
- ret = genphy_read_master_slave(phydev);
- if (ret < 0)
- return ret;
-
- if (!qca808x_is_prefer_master(phydev)) {
- /* Enable seed and configure lower ramdom seed to make phy linked as slave mode */
- ret = qca808x_phy_ms_seed_enable(phydev, true);
+ if (qca808x_has_fast_retrain_or_slave_seed(phydev)) {
+ /* Config the fast retrain for the link 2500M */
+ ret = qca808x_phy_fast_retrain_config(phydev);
if (ret)
return ret;
+
+ ret = genphy_read_master_slave(phydev);
+ if (ret < 0)
+ return ret;
+
+ if (!qca808x_is_prefer_master(phydev)) {
+ /* Enable seed and configure lower ramdom seed to make phy
+ * linked as slave mode.
+ */
+ ret = qca808x_phy_ms_seed_enable(phydev, true);
+ if (ret)
+ return ret;
+ }
}
/* Configure adc threshold as 100mv for the link 10M */
@@ -1826,11 +1835,13 @@ static int qca808x_read_status(struct ph
* value is configured as the same value, the link can't be up and no link change
* occurs.
*/
- if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR ||
- qca808x_is_prefer_master(phydev)) {
- qca808x_phy_ms_seed_enable(phydev, false);
- } else {
- qca808x_phy_ms_seed_enable(phydev, true);
+ if (qca808x_has_fast_retrain_or_slave_seed(phydev)) {
+ if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR ||
+ qca808x_is_prefer_master(phydev)) {
+ qca808x_phy_ms_seed_enable(phydev, false);
+ } else {
+ qca808x_phy_ms_seed_enable(phydev, true);
+ }
}
}
@@ -1845,7 +1856,10 @@ static int qca808x_soft_reset(struct phy
if (ret < 0)
return ret;
- return qca808x_phy_ms_seed_enable(phydev, true);
+ if (qca808x_has_fast_retrain_or_slave_seed(phydev))
+ ret = qca808x_phy_ms_seed_enable(phydev, true);
+
+ return ret;
}
static bool qca808x_cdt_fault_length_valid(int cdt_code)