openwrt/target/linux/generic/backport-6.6/706-v6.6-01-net-phy-at803x-...

71 lines
2.1 KiB
Diff

From 8b8bc13d89a7d23d14b0e041c73f037c9db997b1 Mon Sep 17 00:00:00 2001
From: Luo Jie <quic_luoj@quicinc.com>
Date: Sun, 16 Jul 2023 16:49:19 +0800
Subject: [PATCH 1/6] net: phy: at803x: support qca8081
genphy_c45_pma_read_abilities
qca8081 PHY supports to use genphy_c45_pma_read_abilities for
getting the PHY features supported except for the autoneg ability
but autoneg ability exists in MDIO_STAT1 instead of MMD7.1, add it
manually after calling genphy_c45_pma_read_abilities.
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/phy/at803x.c | 28 ++++++++++++++++++----------
1 file changed, 18 insertions(+), 10 deletions(-)
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -902,15 +902,6 @@ static int at803x_get_features(struct ph
if (err)
return err;
- if (phydev->drv->phy_id == QCA8081_PHY_ID) {
- err = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_NG_EXTABLE);
- if (err < 0)
- return err;
-
- linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported,
- err & MDIO_PMA_NG_EXTABLE_2_5GBT);
- }
-
if (phydev->drv->phy_id != ATH8031_PHY_ID)
return 0;
@@ -1996,6 +1987,23 @@ static int qca808x_cable_test_get_status
return 0;
}
+static int qca808x_get_features(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = genphy_c45_pma_read_abilities(phydev);
+ if (ret)
+ return ret;
+
+ /* The autoneg ability is not existed in bit3 of MMD7.1,
+ * but it is supported by qca808x PHY, so we add it here
+ * manually.
+ */
+ linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
+
+ return 0;
+}
+
static struct phy_driver at803x_driver[] = {
{
/* Qualcomm Atheros AR8035 */
@@ -2163,7 +2171,7 @@ static struct phy_driver at803x_driver[]
.set_tunable = at803x_set_tunable,
.set_wol = at803x_set_wol,
.get_wol = at803x_get_wol,
- .get_features = at803x_get_features,
+ .get_features = qca808x_get_features,
.config_aneg = at803x_config_aneg,
.suspend = genphy_suspend,
.resume = genphy_resume,