539 lines
8.9 KiB
Plaintext
539 lines
8.9 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
/dts-v1/;
|
|
|
|
#include "ipq8074.dtsi"
|
|
#include "ipq8074-ess.dtsi"
|
|
#include "ipq8074-hk-cpu.dtsi"
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
/ {
|
|
model = "Netgear RAX120v2";
|
|
compatible = "netgear,rax120v2", "qcom,ipq8074";
|
|
|
|
aliases {
|
|
serial0 = &blsp1_uart5;
|
|
|
|
led-running = &led_system_white;
|
|
led-upgrade = &led_system_white;
|
|
led-internet = &led_wan_white;
|
|
label-mac-device = &dp5;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
bootargs-append = " ubi.mtd=rootfs root=/dev/ubiblock0_0";
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
rfkill {
|
|
label = "rfkill";
|
|
gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RFKILL>;
|
|
};
|
|
|
|
wps {
|
|
label = "wps";
|
|
gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
};
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
};
|
|
|
|
led_spi {
|
|
compatible = "spi-gpio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
sck-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
|
|
mosi-gpios = <&tlmm 19 GPIO_ACTIVE_HIGH>;
|
|
|
|
led_gpio: led_gpio@0 {
|
|
compatible = "fairchild,74hc595";
|
|
reg = <0>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
registers-number = <2>;
|
|
enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
|
|
spi-max-frequency = <1000000>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_system_white: system-white {
|
|
gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
};
|
|
|
|
led_24g_white {
|
|
gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
linux,default-trigger = "phy1radio";
|
|
};
|
|
|
|
led_5g_white {
|
|
gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
linux,default-trigger = "phy0radio";
|
|
};
|
|
|
|
led_usb1_white {
|
|
gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
};
|
|
|
|
led_usb2_white {
|
|
gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
};
|
|
|
|
led_wan_white: wan-white {
|
|
gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
};
|
|
|
|
led_aqr_green {
|
|
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
};
|
|
|
|
led_aqr_red {
|
|
gpios = <&led_gpio 10 GPIO_ACTIVE_LOW>;
|
|
color = <LED_COLOR_ID_RED>;
|
|
};
|
|
|
|
led_aqr_white {
|
|
gpios = <&led_gpio 11 GPIO_ACTIVE_LOW>;
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
};
|
|
|
|
led_wps_white {
|
|
gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&tlmm {
|
|
mdio_pins: mdio-pins {
|
|
mdc {
|
|
pins = "gpio68";
|
|
function = "mdc";
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
mdio {
|
|
pins = "gpio69";
|
|
function = "mdio";
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&mdio_pins>;
|
|
pinctrl-names = "default";
|
|
reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
|
|
|
|
ethernet-phy-package@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
|
|
compatible = "qcom,qca8075-package";
|
|
|
|
qca8075_0: ethernet-phy@0 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0>;
|
|
};
|
|
|
|
qca8075_1: ethernet-phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <1>;
|
|
};
|
|
|
|
qca8075_2: ethernet-phy@2 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <2>;
|
|
};
|
|
|
|
qca8075_3: ethernet-phy@3 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <3>;
|
|
};
|
|
|
|
qca8075_4: ethernet-phy@4 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <4>;
|
|
};
|
|
};
|
|
|
|
aqr111b0: ethernet-phy@7 {
|
|
compatible ="ethernet-phy-ieee802.3-c45";
|
|
reg = <7>;
|
|
reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&switch {
|
|
status = "okay";
|
|
|
|
switch_lan_bmp = <(ESS_PORT1 | ESS_PORT2 | ESS_PORT3 | ESS_PORT4 | ESS_PORT6)>; /* lan port bitmap */
|
|
switch_wan_bmp = <ESS_PORT5>; /* wan port bitmap */
|
|
switch_mac_mode = <MAC_MODE_PSGMII>; /* mac mode for uniphy instance0*/
|
|
switch_mac_mode2 = <MAC_MODE_USXGMII>; /* mac mode for uniphy instance2*/
|
|
|
|
qcom,port_phyinfo {
|
|
port@1 {
|
|
port_id = <1>;
|
|
phy_address = <0>;
|
|
};
|
|
port@2 {
|
|
port_id = <2>;
|
|
phy_address = <1>;
|
|
};
|
|
port@3 {
|
|
port_id = <3>;
|
|
phy_address = <2>;
|
|
};
|
|
port@4 {
|
|
port_id = <4>;
|
|
phy_address = <3>;
|
|
};
|
|
port@5 {
|
|
port_id = <5>;
|
|
phy_address = <4>;
|
|
};
|
|
port@6 {
|
|
port_id = <6>;
|
|
phy_address = <7>;
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
ethernet-phy-ieee802.3-c45;
|
|
};
|
|
};
|
|
};
|
|
|
|
&edma {
|
|
status = "okay";
|
|
};
|
|
|
|
&dp1 {
|
|
status = "okay";
|
|
phy-handle = <&qca8075_0>;
|
|
label = "lan4";
|
|
nvmem-cells = <&macaddr_lan>;
|
|
nvmem-cell-names = "mac-address";
|
|
};
|
|
|
|
&dp2 {
|
|
status = "okay";
|
|
phy-handle = <&qca8075_1>;
|
|
label = "lan3";
|
|
nvmem-cells = <&macaddr_lan>;
|
|
nvmem-cell-names = "mac-address";
|
|
};
|
|
|
|
&dp3 {
|
|
status = "okay";
|
|
phy-handle = <&qca8075_2>;
|
|
label = "lan2";
|
|
nvmem-cells = <&macaddr_lan>;
|
|
nvmem-cell-names = "mac-address";
|
|
};
|
|
|
|
&dp4 {
|
|
status = "okay";
|
|
phy-handle = <&qca8075_3>;
|
|
label = "lan1";
|
|
nvmem-cells = <&macaddr_lan>;
|
|
nvmem-cell-names = "mac-address";
|
|
};
|
|
|
|
&dp5 {
|
|
status = "okay";
|
|
phy-handle = <&qca8075_4>;
|
|
label = "wan";
|
|
nvmem-cells = <&macaddr_wan>;
|
|
nvmem-cell-names = "mac-address";
|
|
};
|
|
|
|
&dp6_syn {
|
|
status = "okay";
|
|
phy-mode = "usxgmii";
|
|
phy-handle = <&aqr111b0>;
|
|
label = "lan5";
|
|
nvmem-cells = <&macaddr_lan>;
|
|
nvmem-cell-names = "mac-address";
|
|
};
|
|
|
|
&blsp1_uart5 {
|
|
status = "okay";
|
|
};
|
|
|
|
&blsp1_i2c2 {
|
|
status = "okay";
|
|
|
|
g761@3e {
|
|
compatible = "gmt,g763";
|
|
reg = <0x3e>;
|
|
clocks =<&sleep_clk>;
|
|
fan_gear_mode = <0>;
|
|
fan_start = <1>;
|
|
pwm_polarity = <0>;
|
|
};
|
|
};
|
|
|
|
&qpic_bam {
|
|
status = "okay";
|
|
};
|
|
|
|
&qpic_nand {
|
|
status = "okay";
|
|
|
|
nand@0 {
|
|
reg = <0>;
|
|
nand-ecc-strength = <4>;
|
|
nand-ecc-step-size = <512>;
|
|
nand-bus-width = <8>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "0:sbl1";
|
|
reg = <0x00 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@100000 {
|
|
label = "0:mibib";
|
|
reg = <0x100000 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@200000 {
|
|
label = "0:bootconfig";
|
|
reg = <0x200000 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@280000 {
|
|
label = "0:bootconfig_1";
|
|
reg = <0x280000 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@300000 {
|
|
label = "0:qsee";
|
|
reg = <0x300000 0x300000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@600000 {
|
|
label = "0:qsee_1";
|
|
reg = <0x600000 0x300000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@900000 {
|
|
label = "0:devcfg";
|
|
reg = <0x900000 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@980000 {
|
|
label = "0:devcfg_1";
|
|
reg = <0x980000 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@a00000 {
|
|
label = "0:apdp";
|
|
reg = <0xa00000 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@a80000 {
|
|
label = "0:apdp_1";
|
|
reg = <0xa80000 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@b00000 {
|
|
label = "0:rpm";
|
|
reg = <0xb00000 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@b80000 {
|
|
label = "0:rpm_1";
|
|
reg = <0xb80000 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@c00000 {
|
|
label = "0:cdt";
|
|
reg = <0xc00000 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@c80000 {
|
|
label = "0:cdt_1";
|
|
reg = <0xc80000 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@d00000 {
|
|
label = "0:appsblenv";
|
|
reg = <0xd00000 0x80000>;
|
|
};
|
|
|
|
partition@d80000 {
|
|
label = "0:appsbl";
|
|
reg = <0xd80000 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@e80000 {
|
|
label = "0:appsbl_1";
|
|
reg = <0xe80000 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@f80000 {
|
|
label = "0:art";
|
|
reg = <0xf80000 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1000000 {
|
|
label = "0:art.bak";
|
|
reg = <0x1000000 0x0080000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1080000 {
|
|
label = "config";
|
|
reg = <0x1080000 0x0100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1180000 {
|
|
label = "boarddata1";
|
|
reg = <0x1180000 0x0100000>;
|
|
read-only;
|
|
|
|
nvmem-layout {
|
|
compatible = "fixed-layout";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
macaddr_lan: macaddr@0 {
|
|
reg = <0x0 0x6>;
|
|
};
|
|
|
|
macaddr_wan: macaddr@1 {
|
|
reg = <0x6 0x6>;
|
|
};
|
|
|
|
macaddr_wlan5g: macaddr@2 {
|
|
reg = <0xc 0x6>;
|
|
};
|
|
};
|
|
};
|
|
|
|
partition@1280000 {
|
|
label = "boarddata2";
|
|
reg = <0x1280000 0x0100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1380000 {
|
|
label = "pot";
|
|
reg = <0x1380000 0x0100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1480000 {
|
|
label = "dnidata";
|
|
reg = <0x1480000 0x0500000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1980000 {
|
|
label = "kernel";
|
|
reg = <0x1980000 0x1d00000>;
|
|
};
|
|
|
|
partition@7e00000 {
|
|
label = "ethphyfw";
|
|
reg = <0x7e00000 0x80000>;
|
|
};
|
|
|
|
partition@e8800000 {
|
|
label = "rootfs";
|
|
reg = <0xe880000 0x11780000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&qusb_phy_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&qusb_phy_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ssphy_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ssphy_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&wifi{
|
|
status = "okay";
|
|
|
|
qcom,ath11k-calibration-variant = "Netgear-RAX120v2";
|
|
};
|
|
|
|
&cryptobam {
|
|
status = "okay";
|
|
};
|
|
|
|
&crypto {
|
|
status = "okay";
|
|
};
|
|
|
|
&prng {
|
|
status = "okay";
|
|
};
|