openwrt/target/linux/ramips/dts/DWR-512-B.dts

142 lines
2.3 KiB
Plaintext

/dts-v1/;
#include "rt5350.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "ralink,rt5350-soc";
model = "D-Link DWR-512 B";
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
wps {
label = "wps";
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
sms {
label = "dwr-512-b:green:sms";
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
status {
label = "dwr-512-b:green:status";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
2g {
label = "dwr-512-b:green:2g";
gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
};
3g {
label = "dwr-512-b:green:3g";
gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
};
sstrengthr {
label = "dwr-512-b:red:sigstrength";
gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
};
sstrengthg {
label = "dwr-512-b:green:sigstrength";
gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
};
};
gpio-export {
compatible = "gpio-export";
#size-cells = <0>;
modem3g_enable {
gpio-export,name = "modem3g_enable";
gpio-export,output = <1>;
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
};
};
};
&spi0 {
status = "okay";
mx25l6405d@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <30000000>;
m25p,fast-read;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x20000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7a0000>;
};
config: partition@7f0000 {
label = "config";
reg = <0x7f0000 0x10000>;
};
};
};
&spi1 {
status = "okay";
spidev@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "siliconlabs,si3210";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "jtag", "uartf";
ralink,function = "gpio";
};
};
};
&esw {
mediatek,portmap = <0x2f>;
};
&ethernet {
mtd-mac-address = <&config 0xe07e>;
};
&wmac {
ralink,mtd-eeprom = <&config 0xe08a>;
ralink,led-polarity = <1>;
mtd-mac-address = <&config 0xe07e>;
};