openwrt/target/linux/ramips/dts/ArcherMR200.dts

196 lines
2.9 KiB
Plaintext

/dts-v1/;
#include "mt7620a.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "ralink,mt7620a-soc";
model = "TP-Link Archer MR200";
chosen {
bootargs = "console=ttyS0,115200";
};
gpio-leds {
compatible = "gpio-leds";
lan {
label = "mr200:white:lan";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
};
wan {
label = "mr200:white:wan";
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
power {
label = "mr200:white:power";
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
4g {
label = "mr200:white:4g";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
wps {
label = "mr200:white:wps";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
signal1 {
label = "mr200:white:signal1";
gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
};
signal2 {
label = "mr200:white:signal2";
gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
};
signal3 {
label = "mr200:white:signal3";
gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
};
signal4 {
label = "mr200:white:signal4";
gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
};
wlan {
label = "mr200:white:wlan";
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
};
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
reset {
label = "reset";
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_RESTART>;
};
rfkill {
label = "rfkill";
gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_RFKILL>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
power_usb {
gpio-export,name = "power_usb1";
gpio-export,output = <1>;
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
};
};
&gpio1 {
status = "okay";
};
&gpio2 {
status = "okay";
};
&gpio3 {
status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80", "mx25l6405d";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x20000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0x7b0000>;
};
rom: partition@7d0000 {
label = "rom";
reg = <0x7d0000 0x10000>;
read-only;
};
partition@7e0000 {
label = "romfile";
reg = <0x7e0000 0x10000>;
read-only;
};
radio: partition@7f0000 {
label = "radio";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "ephy", "spi refclk";
ralink,function = "gpio";
};
};
};
&ethernet {
mtd-mac-address = <&rom 0xf100>;
mediatek,portmap = "llll";
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};
&gsw {
mediatek,port4 = "ephy";
};
&wmac {
ralink,mtd-eeprom = <&radio 0>;
};
&pcie {
status = "okay";
pcie-bridge {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&radio 32768>;
mediatek,2ghz = <0>;
};
};
};